Instrukcja obsługi JVC GY-HM660RE

JVC kamera wideo GY-HM660RE

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JVC GY-HM660RE (125 stron) w kategorii kamera wideo. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/125
JVC Camcorder Web API Reference
Version 1.17
JVC KENWOOD Corporation
Page 1
Conditions for the use of this document
Use of this document is permitted only if you agree to the following terms.
JVCKENWOOD CORPORATION SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. JVCKENWOOD
CORPORATION HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR
MODIFICATIONS.
THIS DOCUMENT DESCRIBES APPLICATION PROGRAMMING INTERFACE TO CONTROL JVC CAMERA RECORDERS
VIA NETWORK, AND IT SHALL NOT BE USED FOR ANY OTHER PURPOSE.
Page 2
History
Version
Outline
1.00 First release
1.01 Added GY-HM660 to the command table
Added "3.1.15 Set streaming server settings(RTP)" command only GY-HM660.
1.02
Added "3.1.14 Set streaming server settings(RTP)" command for all cameras.
Type "TCP" is effective in "GY-HM650" and "GY-HM660" in command with a streaming type parameter.
Added "Variable Gain" parameter to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-LS300".
1.03
Type "TCP" is effective in "GY-HM650" in command with a streaming type parameter.
Type "UDPN" and "UDPL" are effective in "GY-HM660" in command with a streaming type parameter.
1.04 Supported KY-PZ100 newly.
Added "3.1.3 Set streaming framerate" command for "KY-PZ100".
Added "3.1.6 Available streaming framerate settings" command for "KY-PZ100".
Added "3.4. PTZ Camera Support Command" for "KY-PZ100".
Added "3.5. How to acquire JPEG data" for "KY-PZ100".
1.05 Added "3.1.3 Set streaming framerate" command for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
Added "3.1.6 Available streaming framerate settings" command for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
Added "3.5. How to acquire JPEG data" for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
Added "3.6. How to use interruptible feedback function" for "GY-HM660".
1.06 Error correction. 2.1.1.
Another client is able to connect while first client is using API interface.
3.2.2 SessionRenewal command has become obsolete.
Added "3.6. How to use interruptible feedback function" for "GY-HM8x0".
Type "UDPN" and "UDPL" are effective in "GY-HM8x0" in command with a streaming type parameter
of "3.1.7 Available streaming bitrate settings" command.
1.07 Error correction. "3.1.10 Get streaming server settings".
Revised wrong parameters. They are effective to all models.
Error correction. "3.3.6. Set Web Button Event".
Some parameters are not supported on "KY-PZ100".
Added "MasterBlack" parameters to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event"
for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added "Detail" parameters to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added "3.4.3 Zoom switch operation" command for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added "3.3.10 Seesaw switch operation" command for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added Gain event "Up1"/"Down1" parameters to "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added target models "GY-HM8x0", "GY-HM660", and "GY-HM200" to MenuStatus of "3.3.1 Get Camera Status"
Added "3.7. How to control tally system" description for "GY-HM8x0", "GY-HM660", "GY-HM200", and "KY-PZ100".
Changed ""3.3.5. Tally lamp control" description correspond to it.
1.08 Added "Serial" parameter to "3.2.1. Get System Information" for "GY-HM660","GY-HM8x0","GY-HM200", and "KY-PZ100".
Added "3.2.6 Get NTP Status","3.2.7 Set NTP Server", and "3,2,8 Set NTP settings" Commands
for "GY-HM660","GY-HM8x0","GY-HM200", and "KY-PZ100".
Supported GY-HM25x newly.
Error correction.
Added "Whb" "Status" parameter to "3.3.1. Get camera status".
Changed "3.3.1. Get camera status". Parameter ("Enable" "Streaming" "On/Off") is not effective in "GY-HM200" and "GY-HM25x".
1.09 Added "Serial" parameter to "3.2.1. Get System Information" for "GY-HM650".
Added "3.5. How to acquire JPEG data" for "GY-HM650".
Supported GY-HC900 newly.
1.10 for "GY-HC900" updates as below.
Added some resolution and bitrate parameters to "3.1. Streaming Setting Command".
Added "Smpte2022Fec" to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(RTP)".
Added "AdaptiveBitrate" to "3.1.10. Get streaming server settings" and "3.1.14. Set streaming server settings(ZIXI)" .
Added "3.8. Return over IP Command" for "GY-HC900".
Added "Resolution" and "FrameRate" to "3.8.3. GetReturnOverIpServerSettings" and "3.8.4. SetReturnOverIpServerSettings(RTSP/Zixi)".
Added "3.8.3.1. AvailableTypeOfReturnOverIP" and "3.8.3.2. AvailableFrameRateOfReturnOverIP" commands.
Added "IrisBar" parameter to "3.3.7. Set Web Slider Event".
Added "Position(Iris)" parameter "3.3.1. Get camera status".
Added "PCR Mode" to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(UDP/Zixi/RTP)" .
Added "Overlay" and "Tagging" parameter to 3.2.1. Get System Information.
Error correction. GY-HC900 does not support "Iris PushAuto" of "3.3.6 Set Web Event".
1.11 Supported GY-HC5x0 newly.
Added "3.2.6. Get NTP Status" and "3.2.7. Set NTP Server" for "GY-HC5x0".
Added SRT parameter for "GY-HC5x0".
"3.2.1. Get System Information", "3.1.7. Available streaming bitrate settings",
"3.1.10. Get streaming server settings", and "3.1.18. Set streaming server settings(SRT)".
Added "PCR Mode" parameter to "3.1.10. Get streaming server settings"
and "3.1.16.Set streaming server settings(UDP/Zixi/RTP)" for GY-HC5x0.
Added "RTMPS" protocol for "GY-HC5x0".
"3.1.7. Available streaming bitrate settings" and "3.1.10. Get streaming server settings"
and "3.1.16. Set streaming server settings(RTMPS)".
1.12 Added "3.2.6. Get NTP Status" and "3.2.7. Set NTP Server" for "GY-HC900".
Added SRT parameter for "GY-HC900".
"3.2.1. Get System Information", "3.1.7. Available streaming bitrate settings",
"3.1.10. Get streaming server settings", and "3.1.18. Set streaming server settings(SRT)".
Added "3.8. Return over IP Command" 30p/25p parameter for "GY-HC5x0".
Added "IrisBar" parameter to "3.3.7. Set Web Slider Event" for "GY-HC5x0".
Added "Position(Iris)" parameter "3.3.1. Get camera status" for "GY-HC5x0".
Added "KA_EN200" parameter to 3.2.1. Get System Information for "GY-HC5x0" and "GY-HC900".
Added "422 60p" and "422 50p" parameters to each available streaming settings
for "GY-HC5x0" and "GY-HC900" when "KA-EN200" is enabled.
"3.1.1. Get streaming settings" and other available settings.
Added "EXT slot information" to "3.3.1. Get camera status" for "GY-HC900".
Page 3


Specyfikacje produktu

Marka: JVC
Kategoria: kamera wideo
Model: GY-HM660RE

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JVC GY-HM660RE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kamera wideo JVC

JVC

JVC GY-HM700CHU Instrukcja

10 Października 2024
JVC

JVC Everio GZ-MG630 Instrukcja

20 Września 2024
JVC

JVC KY-PZ510NBE Instrukcja

17 Września 2024
JVC

JVC GR-AXM18 Instrukcja

16 Września 2024
JVC

JVC Everio GZ-R440 Instrukcja

13 Września 2024
JVC

JVC GR-D370 Instrukcja

12 Września 2024
JVC

JVC GZ-HM670BUS Instrukcja

9 Września 2024

Instrukcje kamera wideo

Najnowsze instrukcje dla kamera wideo