Instrukcja obsługi JVC DT-V1710CGU=

JVC Telewizja DT-V1710CGU=

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JVC DT-V1710CGU= (24 stron) w kategorii Telewizja. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
INSTRUCTIONS
DT-V1700CG
MULTI-FORMAT MONITOR
VOLUME
SLOT 1
A B
DEGAUSS
MENU BLUE
CHECK
ASPECT AREA
MARKER
UNDER
SCAN PULSE
CROSS COLOR
OFF
SLOT 2
C D
SLOT 3 POWER
E F
INPUT SELECT
For Customer Use:
Enter below the Serial No. which is located on the rear of
the cabinet. Retain this information for future reference.
Model No. :DT-V1700CG
Serial No. :The illustration above shows the DT-V1700CG with provided
wide mask attached.
SCREEN BURN
● It is not recommended to keep a certain still image
displayed on screen for a long time as well as displaying
extremely bright images on screen. This may cause a
burning (sticking) phenomenon on the screen of cathode-ray
tube. This problem does not occur as far as displaying
normal video playback motion images.
䡵 PRECAUTIONS
● Use only the power source specified on the unit.
(120 V/230 V AC, 50 Hz/60 Hz)
● Keep flammable material, water, and metal objects away
from the unit – especially the interior of the unit.
● This unit incorporates high voltage circuitry.
For your own safety and that of your equipment, do not
attempt to modify or disassemble this monitor.
There are no user-serviceable parts inside.
● Video or audio signals cannot be input to this monitor
without optional input cards.
● In these instructions, all explanations (except where noted)
refer to the DT-V1700CG with input cards installed.
䡵 HANDLING
● Avoid shocks or vibrations. These may damage the unit and
cause it to malfunction.
● Do not block the ventilation slots.
● Do not expose this unit to high temperatures.
Extended exposure to direct sunlight or a heater could
deform the cabinet or cause the performance of internal
components to deteriorate.
● Do not place the unit near appliances generating strong
electric or magnetic fields. There can generate picture noise
and instability.
● Keep the monitor clean by wiping the cabinet and CRT
screen with a piece of soft cloth. Do not apply thinner or
benzine. These chemicals can damage the finish and erase
printed letters. When the unit is excessively dirty, use a
diluted neutral cleanser, then wipe away the cleanser with a
dry cloth.
DEGAUSS
● Do not use a magnet eraser to degauss the monitor’s
cathode ray tube from the outside. Doing so may distort its
aperture grill and cause a malfunction.
In order to prevent any fatal accidents caused by
misoperation or mishandling the monitor, be fully aware of all
the following precautions.
WARNINGS
To prevent fire or shock hazard, do not expose this
monitor to rain or moisture. Dangerous high voltages
are present inside the unit. Do not remove the back
cover of the cabinet. When servicing the monitor,
contrast qualified service personnel. Never try to
service it yourself.
WARNING : THIS APPARATUS
MUST BE EARTHED.
2
Improper operations, in particular alternation of high
voltage or changing the type of tube may result in x-ray
emission of considerable dose. A unit altered in such a
way no longer meets the standards of certification, and
must therefore no longer be operated.
This monitor is equipped with a 3-blade grounding-type
plug to satisfy FCC rule. If you are unable to insert the
plug into the outlet, contact your electrician.
FCC NOTICE (U.S.A. only)
CAUTION: Changes or modifications not approved by
JVC could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
SAFETY PRECAUTIONS
ENGLISH
3
Fuse
POWER CONNECTION
The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries
or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power
cord designated to ensure Safety and EMC regulations of each countries.
Power cord
Power supply voltage : AC 120 V AC 230 V AC 230 V
Countries : U.S.A. and Canada European countries United Kingdom
Warning:
● Do not use the same Power Cord for AC 120 V as for AC 230 V. Doing so may cause malfunction, electric shock
or fire.
Note for the United Kingdom power cord only
The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated
approved type, re-fit the fuse cover.
(Consult your dealer or qualified service personnel.)
How to replace the fuse
Open the fuse compartment with the blade screw driver, and
replace the fuse.
(* An example is shown in the illustration.)
SAFETY PRECAUTIONS ........................................................................2
CONTROLS AND FEATURES ................................................................ 4
CONTROLS AND FEATURES
(INPUT CARD: OPTIONAL) ....................................................................6
PREPARATION .......................................................................................8
BASIC MENU OPERATIONS
(MAIN MENU, SETUP MENU) ................................................................9
HOW TO USE “MAIN MENU”...............................................................10
HOW TO USE “SETUP MENU” ............................................................13
HOW TO USE EXTERNAL CONTROL .................................................17
TROUBLESHOOTING...........................................................................19
SPECIFICATIONS .................................................................................21
CONTENTS

Specyfikacje produktu

Marka: JVC
Kategoria: Telewizja
Model: DT-V1710CGU=

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JVC DT-V1710CGU=, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Telewizja JVC

JVC

JVC HD-58S998 Instrukcja

11 Stycznia 2025
JVC

JVC LT-24FD100 Instrukcja

3 Października 2024
JVC

JVC LT-26S60BU Instrukcja

2 Października 2024
JVC

JVC EM55FT Instrukcja

30 Września 2024
JVC

JVC LT-32VH5105 Instrukcja

24 Września 2024
JVC

JVC LT-32VH3105 Instrukcja

24 Września 2024
JVC

JVC LT-32FD110 Instrukcja

24 Września 2024
JVC

JVC AV-21D114 Instrukcja

23 Września 2024
JVC

JVC LT-55VU3005 Instrukcja

22 Września 2024
JVC

JVC JLE37BC3001 Instrukcja

22 Września 2024

Instrukcje Telewizja

Najnowsze instrukcje dla Telewizja

Philips

Philips 32HFL2889T Instrukcja

15 Stycznia 2025
Philips

Philips 25CE6270 Instrukcja

15 Stycznia 2025
Daewoo

Daewoo dtz 29u7 Instrukcja

15 Stycznia 2025
Grundig

Grundig Boston ST 170 IDTV Instrukcja

15 Stycznia 2025
Daewoo

Daewoo dty-2880 Instrukcja

15 Stycznia 2025
Philips

Philips 50PUS6809 Instrukcja

15 Stycznia 2025
Philips

Philips 28GR5776 Instrukcja

15 Stycznia 2025
Daewoo

Daewoo dty 25 g6 Instrukcja

15 Stycznia 2025
Philips

Philips 21PT532 Instrukcja

15 Stycznia 2025
Philips

Philips 32pw9788 Instrukcja

15 Stycznia 2025