Instrukcja obsługi JVC DT-R17L4D

JVC monitor DT-R17L4D

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JVC DT-R17L4D (28 stron) w kategorii monitor. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/28
LCT2646-002A-H
For Customer Use:
Enter below the Serial No. which is
located on the rear of the cabinet. Retain
this information for future reference.
Model No.
Serial No.
: DT-R24L41D / DT-R17L4D
:
DT-R24L41D
DT-R17L4D
MULTI FORMAT LCD MONITOR INSTRUCTIONS
The illustration of the monitor is of DT-R24L41D.
CAUTION:
To reduce the risk of electric shock. Do
not remove cover (or back). No user
serviceable parts inside. Refer servicing
to qualified service personnel.
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated “dangerous voltage
within the product’s enclosure that may
be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
CAUTION
2
Table of Contents
Safety Precautions 3
IMPORTANT SAFEGUARDS ............................................................................... 3
Operating Precautions 5
Caution for use of the product for many hours...................................................... 5
Caution for use of the product in the high temperature ........................................ 5
Maintenance ......................................................................................................... 5
Installation 6
Connections 8
Rear panel ............................................................................................................ 8
Daily Operations 10
Front panel .......................................................................................................... 10
Menu Configuration 12
The operation procedure..................................................................................... 12
Menu Transition Diagram.................................................................................... 12
MAIN MENU ....................................................................................................... 13
SET-UP MENU ................................................................................................... 15
External Control 18
About the external control ................................................................................... 18
Using the MAKE/TRIGGER system .................................................................... 18
Using the serial communication .......................................................................... 20
Troubleshooting 22
Self-check program ............................................................................................. 23
Specifications 24
General ............................................................................................................... 24
LCD panel ........................................................................................................... 24
Input/output terminals ......................................................................................... 24
Dimensions ......................................................................................................... 25
Available signals ................................................................................................. 26
3
Safety Precautions
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHALL BE PLACED ON THE APPARATUS.
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This unit has
been engineered and manufactured to assure your personal safety.
But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRIC
SHOCK OR FIRE. In order not to defeat the safeguards incorporated
into this product, observe the following basic rules for its installation,
use, and service. Please read these “IMPORTANT SAFEGUARDS”
carefully before use.
All the safety and operating instructions should be read before the
product is operated.
The safety and operating instructions should be retained for future
reference.
All warnings on the product and in the operating instructions should
be adhered to.
All operating instructions should be followed.
POWER CONNECTION
The power supply voltage rating of this product is AC 120 V
The power cord attached conforms to the following power supply
voltage and countries. Use only the power cord designated to
ensure safety and EMC regulations of each country.
Not all types of power cords are supplied to this product.
For U.S.A. and Canada:
AC 120 V
This plug will t only into a grounded power outlet. If you are
unable to insert the plug into the outlet, contact your electrician to
install the proper outlet. Do not defeat the safety purpose of the
grounded plug.
This product should be operated only with the type of power
source indicated on the label. If you are not sure of the type of
power supply of your home, consult your product dealer or local
electric power company.
Warning: This is a class A product. In a domestic environment this
product may cause radio interference in which case the
user may be required to take adequate measures.
Before connecting other products such as VCR’s and personal
computers, you should turn off the power of this product for
protection against electric shock.
Do not use attachments not recommended by the
manufacturer as they may be hazardous.
When replacement parts are required, be sure the service
technician has used replacement parts speci ed by the
manufacturer or equivalents. Unauthorized substitutions may
result in re, electric shock, or other hazards.
Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
Under the following conditions,
1. Turn off the power.
2. Unplug this product from the wall outlet.
3. Refer service to quali ed service personnel.
a) When the product emits smoke or unusual smell.
b) When the product exhibits a distinct change in performance
—for example, no picture or no sound.
c) If liquid has been spilled, or objects have fallen on the product.
d) If the product has been exposed to rain or water.
e) If the product has been dropped or damaged in any way.
f) When the power supply cord or plug is damaged.
Do not install this product in the following places:
in a damp or dusty room
where the product is exposed to soot or steam, such as
near the cooking counter or a humidi er
near heat sources
where condensation easily occurs, such as near the window
in a location exposed to direct sunlight or strong light
Do not place this product on an unstable cart, stand, or table.
The product may fall, causing serious injury to a child or adult,
and serious damage to the product.
The product should be mounted according to the
manufacturer’s instructions, and should use a mount
recommended by the manufacturer.
Do not use this product near water.
Be sure to install the product in the place where proper
temperature and humidity are kept ( “Operating conditions”
on page 24).
This product becomes hot during its use. Take enough care
when handling the product.
Do not use the product for a long time if the sound is distorted.
Do not attempt to service this product yourself, as opening or
removing covers may expose you to dangerous voltages and
other hazards. Refer all service to quali ed service personnel.
Use only the power source speci ed on the unit.
AC power: 120 V, 50 Hz/60 Hz
The AC power supply is controlled by turning on/off the
POWER switch on the rear panel. If the product is installed in a
place where you cannot easily turn on/off the POWER switch,
control the AC power supply by plugging/unplugging the power
cord into/from the AC outlet. In this case, install the product as
close to the AC outlet as possible, and leave enough space for
plugging/unplugging the power cord. If the product is installed
in a place where you cannot easily plug/unplug the power cord,
equip an easily accessible device to the wiring of the building
for turning on/off the power.
When the product is left unattended and unused for a long
period of time, unplug it from the wall outlet and disconnect the
cable system.
Do not overload wall outlets, extension cords, or convenience
receptacles on other equipment as this can result in a risk of
re or electric shock.
Use only the accessory cord designed for this product to
prevent shock.


Specyfikacje produktu

Marka: JVC
Kategoria: monitor
Model: DT-R17L4D

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JVC DT-R17L4D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje monitor JVC

JVC

JVC ProHD DT-N21F Instrukcja

8 Października 2024
JVC

JVC DT-N24H Instrukcja

7 Października 2024
JVC

JVC DT-X7HUX2 Instrukcja

5 Października 2024
JVC

JVC LT-GN27425A Instrukcja

5 Października 2024
JVC

JVC LT-GN27225A Instrukcja

4 Października 2024
JVC

JVC DT-V20L1U Instrukcja

27 Września 2024
JVC

JVC Q27WCF Instrukcja

24 Września 2024
JVC

JVC 24WCF Instrukcja

24 Września 2024
JVC

JVC TM-A170G Instrukcja

16 Września 2024
JVC

JVC RK-C17D/ESP Instrukcja

12 Września 2024

Instrukcje monitor

Najnowsze instrukcje dla monitor

Acer

Acer EB321HQUDbmidphx Instrukcja

15 Października 2024
Bauhn

Bauhn APMTR-0624 Instrukcja

15 Października 2024
Acer

Acer KA270H Instrukcja

14 Października 2024
Acer

Acer K272HUL Dbmidpx Instrukcja

14 Października 2024
NEC

NEC E424 Instrukcja

14 Października 2024
LG

LG UltraGear 32GS85Q Instrukcja

14 Października 2024
LG

LG UltraGear 27GS85Q Instrukcja

14 Października 2024
Acer

Acer EK220QB Instrukcja

13 Października 2024
Acer

Acer S242HL Instrukcja

12 Października 2024