Instrukcja obsługi JUNG FOHAL2995-L

JUNG Niesklasyfikowane FOHAL2995-L

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JUNG FOHAL2995-L (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
Friends of Hue radio transmitter
29.03.20221 / 40024003103
Friends of Hue radio transmitter
Ref.-no.: FOH A 595 ..,
FOH LS 995 .., FOH .. 2995-L
Friends of Hue radio transmitter set
Ref.-no.: FOHS A 550 595 ..,
FOHS LS 995 ..
Operating instructions
1 Safety instructions
Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, re or property damage possible. Please read and follow manual fully.
The radio communication takes place via a non-exclusively available transmission path, and is therefore not
suitable for safety-related applications, such as emergency stop and emergency call.
These instructions are an integral part of the product and must remain with the end customer.
2 Device components
Fig. 1: Device components
(1) Adhesive lm
(2) Holder plate
(3) Frame (included in set ref.-no. FOHS ..)
(4) Radio module
(5) Rockers
(6) Retaining screw
Fig. 2 and g. 3: Transport lock and protective lm
(7) Transport lock for rockers
(8) Protective lm for holder plate
1
6
23
4
5
8
7
GB
Friends of Hue radio transmitter
29.03.20222 / 40024003103
3 Function
Intended use
- Smart switch for wireless remote control of Philips Hue lamps
- For switching, dimming and controlling individual light scenes
- For residential use only
- Mounting on appliance box according to EN 60670-1, screw xing on walls or adhesive xing on smooth, even
surfaces (glass). Adhesive lm included.
Product characteristics
- Battery-free device without external power supply
- Transmitting energy is generated from mechanical energy of actuation (energy harvesting)
- Encrypted transmission with device-specic code
- Wireless standard ZigBee Green Power, compatible with Friends of Hue and Apple HomeKit
- Automatic range extension via Philips Hue lamps
- Simple commissioning and conguration via Philips Hue app and Hue Bridge V2 or higher
4 Information for electrically skilled persons
Installation and electrical connection
DANGER
Electrical shock on contact with live parts in the installation environment.
Electrical shocks can be fatal.
Before working on the device, disconnect the power and cover live parts in the area!
Installation location
The radio range in buildings is approx. 20 m without wall penetration.
A maximum of one wall penetration is recommended, because it attenuates the radio signal.
Fig. 4: Installation location
If several walls have to be penetrated the receiver may not be able to receive the signal from the transmitter correctly.
Metal parts at the installation site (e.g. metal door frames) or moisture (e.g. in outdoor areas) can also have a
negative e󰀨ect on the radio transmission. The range can be extended with Philips Hue lamps (in each room).
Fitting the device
• Fix holder plate (2) with adhesive pad (1) at the installation location. (see section „Adhesive xing“)
Alternatively, screw the holder plate onto an appliance box or directly onto the wall.
Note marking „Top“.
• Push frame (3) onto holder plate.
• Snap radio module (4) onto holder plate.
arrow on sticker (rear side of radio module) points upwards (or „O“ is up and „I“ is down).
• Optional: Secure the radio module with the enclosed screw (6).
• Snap on rockers (5).
Note marking „Top“.
The transport lock (7) behind the rockers must be removed beforehand. (g. 2)
Friends of Hue radio transmitter
29.03.20223 / 40024003103
Adhesive xing
Important:
The nal strength of the adhesive is only reached after 24 hours.
• After gluing the holder plate, let the adhesive cure a little.
Important:
The installation location cannot be changed after the adhesive xing.
• To test the range, carry out commissioning before adhesive xing.
Prerequisite:
Surface is dry, clean, stable and even.
Suitable cleaning agents:
water, degreaser, glass cleaner, methylated spirit
Not suitable for cleaning:
Bath or all-purpose cleaner, aggressive detergents
• Remove the protective lm from the back of the adhesive lm (1).
• Stick the adhesive lm aligned on the surface.
Press rmly for about 10 seconds.
• Remove the protective lm (8) for the holder plate (2).
Do not remove the remaining protective lms.
• Stick the holder plate onto the adhesive lm.
5 Operation
Operating elements
The radio transmitter is operated via two rockers (4-channel).
The functions of the rockers (switching, push-button or dimming) are not congured in the factory settings of the
device.
6 Commissioning
In the following description the commissioning of the radio transmitter is referred to as „teaching“ in the Philips Hue
Bridge. The radio signal of the transmitter has to be taught in the Philips Hue Bridge as receiver. After teaching, the
Philips Hue Bridge can clearly assign the signals of the transmitter.
Teaching-in the radio transmitter in the Philips Hue Bridge
Requirements:
- Philips Hue Bridge is ready for operation and is within range of the radio transmitter.
- Philips Hue app is installed.
• Select „Settings“ > „Set up accessories“ > „Add accessories“ > „Friends of Hue switch“ in Philips Hue app.
All compatible Friends of Hue switches are displayed.
• Select „JUNG Friends of Hue Switch“.
• Operate rockers (5) of the radio transmitter as described in the app.
The radio transmitter is taught-in and is added as accessory in the app.
The radio transmitter can now be congured in the app.
7 Conguration
The functions of the rockers (switching, push-button or dimming) must be congured in the Philips Hue app.
Max. 4 light scenes can be congured.
Conguring the radio transmitter in the Philips Hue app
Requirements:
- The radio transmitter is taught in the Philips Hue Bridge.
- Philips Hue lamps are ready for use.
• Assign radio transmitter to lamps and rooms as described in the app and congure them.
• Save the conguration.

Specyfikacje produktu

Marka: JUNG
Kategoria: Niesklasyfikowane
Model: FOHAL2995-L

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JUNG FOHAL2995-L, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane JUNG

JUNG

JUNG 531KO5EUM24 Instrukcja

8 Października 2024
JUNG

JUNG 531KO5EUM230 Instrukcja

8 Października 2024
JUNG

JUNG 534KO5EUD2 Instrukcja

8 Października 2024
JUNG

JUNG 531KO6EUM24 Instrukcja

8 Października 2024
JUNG

JUNG IPZ1000REG Instrukcja

7 Października 2024
JUNG

JUNG CD17180WW Instrukcja

22 Września 2024
JUNG

JUNG ME17280C Instrukcja

22 Września 2024
JUNG

JUNG LS17180WWM Instrukcja

22 Września 2024
JUNG

JUNG CD1750DWW Instrukcja

22 Września 2024
JUNG

JUNG AL17180WUD Instrukcja

22 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024