Instrukcja obsługi JUNG CD5232M

JUNG Niesklasyfikowane CD5232M

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JUNG CD5232M (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
Blinds Management JM Memory Attachment
Ref.-no.: ..5232 M.., ..5232 MS..
Operating Instructions
JM Memory Attachment
1. Function
The JM memory attachment is a component of the Jalousie Management
louver control system and must be installed in a connecting box
according to DIN 49073 (recommendation: deep box) in conjunction with
the JM motor control insert. Due to the possibility of individually storing
one up and one down time, the unit adjusts to the practice of the user.
The two louver moving times stored are repeated every 24 hours. This
provides comfortable, automatic louver control which can, for example,
be used for presence simulation.
The different functions are activated by the period of operating the
pushbutton (Fig. A):
Funktion Approx.Operating
Period.
c Blade adjustment max. 1sec.
d Continuous operation > 1s - <3,5sec.
e Storing one up and down time 3,5sec. - <8sec.
Mode (f p/b mode,g memory mode) 8sec. - <12sec.
h Reset > 12sec.
Stand: Feb-08 825 186 03
Blinds Management JM Memory Attachment
Ref.-no.: ..5232 M.., ..5232 MS..
2
Blinds Management JM Memory Attachment
Ref.-no.: ..5232 M.., ..5232 MS..
1.1. Push-Button Mode
The JM memory attachment acts as a louver push-button. Using the▲
key moves up the louver, while the▼ key moves it down.
Short pressing (1 second max.):
A pulse is produced which corresponds to the length of the time the key
is held pressed. This function, for example, serves for adjusting the
louver blades.
After longer pressing (> 1 sec. to < 3,5 sec.):
The JM memory attachment changes to self-holding (‘continuous
operation’).
1.2. Memory Mode
Louver operation is the same as in the push-button mode. The set
indicates the operating mode by a tone signal when the pushbutton is
depressed (no tone signal when the set is controlled via the extension
input.) For presence simulation, the two moving times learnt (one up and
one down time) are, in addition, reproduced every 24 hours. Example:
Control events learnt: Up at 7:00 a. m.; down at 8:00 p. m. The louver is
daily moved up at 7:00 a. m. and moved down at 8:00 p. m. This takes
place every day by day until a new time is learnt. Always a full movement
of approx. 2 minutes is done.
1.3. Storing Up or Down Time
Storing can be performed in the push-button or memory mode. The
moving.
time is stored by long pressing of the▲ up zime or ▼ down time direction
key. After approx. 2 seconds, 5 or 6 signal tones of the built-in buzzer
sound, followed by a continuous tone of about 1.5 seconds. This saves
the moving command. Zf the key is released before, the moving
command is executed (moving tim approx. 2 minutes) but not saved. One
up time and one down time can be stored. It is also possible to store one
up time or one down time only (e. g. only one down time in the evening;
the louver is individually moved up in the morning by hand). Storing more
than two switching events within one day will overwrite the first ones so
that only the last two events are recorded in this case.
1.4. Mode Changing (Push-Button Mode, Memory Mode)
By longer pressing period of the▲ or the ▼ key (8 sec. to <12 sec.) After
approx. 2 seconds, 5 to 6 signal tones of the built-in buzzer sound,
followed by a continuous tone about 1.5 seconds. Then, depending upon
the current mode:
4 short signal tones: memory attachment is in the memory mode. 1
second continuous tone: memory attachment is in the push-button mode.
The mode is changed with the beginning of the signal tones or the
continuous tone, respectively.
1.5. Reset (Resetting the Times Learnt)
By longer pressing period of the▲ or the ▼ key (2 sec. min.)
3

Specyfikacje produktu

Marka: JUNG
Kategoria: Niesklasyfikowane
Model: CD5232M

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JUNG CD5232M, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane JUNG

JUNG

JUNG MAGO1193 Instrukcja

10 Grudnia 2024
JUNG

JUNG MAA1193 Instrukcja

10 Grudnia 2024
JUNG

JUNG MACD1193WW Instrukcja

10 Grudnia 2024
JUNG

JUNG WS10D Instrukcja

10 Grudnia 2024
JUNG

JUNG AL1561.07F Instrukcja

10 Grudnia 2024
JUNG

JUNG 1745DSTE Instrukcja

10 Grudnia 2024
JUNG

JUNG MALS1193 Instrukcja

10 Grudnia 2024
JUNG

JUNG ABAS1561.07 Instrukcja

10 Grudnia 2024
JUNG

JUNG LCZ981BF Instrukcja

10 Grudnia 2024
JUNG

JUNG MAAL1193 Instrukcja

10 Grudnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

GBC

GBC ThermaBind T500Pro Instrukcja

15 Stycznia 2025
Da-Lite

Da-Lite Parallax 29850 Instrukcja

15 Stycznia 2025
Crivit

Crivit IAN 290909 Instrukcja

15 Stycznia 2025
Tripp Lite

Tripp Lite SmartRack SRW12US Instrukcja

15 Stycznia 2025
Powerfix

Powerfix IAN 280221 Instrukcja

15 Stycznia 2025
AGM

AGM Rattler TC35-640 Instrukcja

15 Stycznia 2025
AGM

AGM Wolf-7 Pro Instrukcja

15 Stycznia 2025
AGM

AGM Anaconda TC50-640 Instrukcja

15 Stycznia 2025
AGM

AGM Secutor Pro TS50-640 Instrukcja

15 Stycznia 2025
Microchip

Microchip AT91SAM9M11 Instrukcja

15 Stycznia 2025