Instrukcja obsługi JUNG A5232BFSANM

JUNG Niesklasyfikowane A5232BFSANM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JUNG A5232BFSANM (10 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/10

Centre plate with anti lock-out function, Centre plate with anti lock-out

function and sensor connection

Blinds Management

Centre plate with anti lock-out function

Art. No. : ..5232..

Centre plate with anti lock-out function and sensor connection

Art. No. : ..5232 S..

Operating instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the devise or

load. At the same time, take into account all circuit breakers that supply dangerous

voltage to the device or load.

Danger of electric shock. Device is not suitable for disconnection from supply voltage.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Device components

Figure 1: Device components

(1) Venetian blind control

(2) Frame

(3) Cover

(4) Status LED

3 Function

Intended use

- Operation of electrically-driven blinds, shutters and awnings

- Operation on control of the Venetian blind control system

Product characteristics

- Status LED

- Lock-out protection

- The individual moving time from the upper end position is storable

1/4

32550723

J:0082550723 16.05.2014

Additional functions for the cover with sensor connection

- Evaluation of a sun sensor

- Brightness threshold adjustable

- Automatic recognition of an outdoor sensor during the first sensor run

Sun protection function for cover with sensor evaluation

The connection of a sun sensor enables automatic shading when it is very bright outside. The

brightness threshold that controls the sun protection can be adjusted on the cover. If the

measured brightness exceeds the predefined brightness threshold for more than 2 minutes, the

Venetian blind moves downwards. The previously stored individual moving time is executed for

an outdoor sensor. The stop position is determined by the sun sensor for an indoor sensor.

i The sun protection function is only activated if the Venetian blind has been moved to the

upper end position and the control has deactivated automatically after 2 minutes. Each

manual operation deactivates the sun protection.

If the brightness threshold is fallen short of for more than 15 minutes, the Venetian blind moves

back to the upper end position.

4 Operation

Moving the Venetian blind

o Press top or bottom of cover for longer than one second.

The Venetian blind moves in the desired direction to the end position or stops when the

button is pressed again.

Adjusting the slats

o Press top or bottom of cover for shorter than one second.

The slat position changes in the desired direction for as long as the button is pressed.

Activating lock-out protection

The lock-out protection prevents the Venetian blind from automatically moving down

unintentionally. Shutting down on site via the sensors or extensions is disabled.

o Press top of cover for longer than 4 seconds.

Status LED is illuminated. Venetian blind moves to the upper end position, the lock-out

protection is activated.

Deactivating lock-out protection

o Press top button briefly.

Status LED goes out.

The lock-out protection is deactivated.

i After a power failure, the lock-out protection is deactivated.

Saving individual moving time

If a Venetian blind should not move to the lower end position "ventilation function" or an outdoor

sensor is used, a shorter moving time can be stored. A time between 0.5 seconds and 2

minutes can be stored.

o Press cover over entire surface for longer than 4 seconds.

The Status LED flashes. The Venetian blind moves automatically to the upper end position.

o Keep the cover pressed in the direction until the Venetian blind is in the desired position.o

o Release cover.

Venetian blind stops.

o Press cover over entire surface for at least 1 second to store the moving time.

- Or -

o Press cover or to discard the moving time.o n

The storage mode is exited automatically and the LED ceases to be illuminated.

2/4

32550723

J:0082550723 16.05.2014

Blinds Management

Centre plate with anti lock-out function, Centre plate with anti lock-out

function and sensor connection

i The individual moving time remains permanently stored. The old moving time will be

replaced if a new moving time is stored.

i To execute the individual moving time, the Venetian blind must be moved to the upper end

position and switch off there automatically after 2 minutes.

5 Information for electrically skilled persons

5.1 Fitting and electrical connection

Mounting and connecting

DANGER!

Electrical shock when live parts are touched.

Electrical shocks can be fatal.

Before carrying out work on the device or load, disengage all the

corresponding circuit breakers. Cover up live parts in the working environment.

The Venetian blind control is mounted and connected properly (see instructions for the relevant

Venetian blind control).

o Install sun sensor for covers with sensor connection and connect to terminal block (see

instructions for the sensors and control).

o Adjust brightness threshold (see following chapter).

i Connect the sun sensor with the correct polarity. If a sensor is connected with reversed

polarity, this will result in malfunctions. It might not be possible to operate the cover any

more.

o Mount cover (3) with frame (2) onto the Venetian blind control (1) (figure 1).

Adjusting brightness threshold for cover with sensor evaluation

Figure 2: Back of cover: Adjuster for brightness threshold

The brightness threshold can be adjusted within a range of approx. 5,000 Lux "small sun" to

approx 80,000 Lux "large sun" using the adjuster (5) on the back of the cover (figure 2). The

adjuster is preset to approx. 15,000 Lux at the factory.

o Adjust the brightness threshold to the required value. Adjust the brightness threshold value

after commissioning if necessary.

3/4

32550723

J:0082550723 16.05.2014

Blinds Management

Centre plate with anti lock-out function, Centre plate with anti lock-out

function and sensor connection

Specyfikacje produktu

Marka:	JUNG
Kategoria:	Niesklasyfikowane
Model:	A5232BFSANM
Kolor produktu:	Biały
Typ kontroli:	Przyciski
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	230 V
Wysokość produktu:	620 mm
Szerokość produktu:	410 mm
Głębokość produktu:	305 mm
Poziom hałasu:	65 dB
Prąd:	2.5 A
Kod zharmonizowanego systemu (HS):	84729080
Pobór mocy:	500 W
Zabezpieczenie przed przegrzaniem:	Tak
Kółka:	Tak
Rozmiary seri A ISO (A0…A9):	A4
Liczba kół:	4 szt.
Bieg wsteczny:	Tak
Rozdrabniacz:	Rozdrabnianie mikro-cięte
Szerokość szczeliny wejściowej:	220 mm
Niszczenie płyt CD:	Nie
Niszczenie papieru:	Tak
Niszczenie kart kredytowych:	Nie
Poziom ochrony:	P-5
Ilość arkuszy niszczonych jednocześnie:	15 ark.
Wymiary ścinek:	2 x 15 mm
Cykl pracy:	30 min
Prędkość niszczenia:	1500 mm/min
Pojemność kosza:	30 l
Gramatura:	80 g/m²