Instrukcja obsługi Juki UT59
Juki
Naaimachine
UT59
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Juki UT59 (14 stron) w kategorii Naaimachine. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/14
INSTRUCTION MANUAL
MF-7900,7900D/UT59
i
CONTENTS
I. SPECIFICATIONS ...........................................................................................................1
II. AT THE BEGINNING......................................................................................................1
III. INSTALLING THE ACCESSORIES.............................................................................2
1. Installing the air regulator 2 ...................................................................................................................
2. Installing the manifold 2 .........................................................................................................................
3. Connecting the cords 3 ..........................................................................................................................
4. Setting procedure of the machine head 4 .............................................................................................
IV. AIR PIPING DRAWING.................................................................................................5
1. Piping of the thread trimmer device 5 ...................................................................................................
2. Adjusting the air regulator 5 ...................................................................................................................
V. THREADING THE MACHINE HEAD ............................................................................6
VI. ADJUSTING THE LOOPER THREAD TRIMMER MECHANISM .............................7
1. Initial position of the looper thread trimmer mechanism 7 .................................................................
VII. INSTALLING THE SS LEVER UNIT ..........................................................................8
1. Installing the SS lever unit 8 ..................................................................................................................
2. Adjusting the SS lever unit 8 ..................................................................................................................
VIII. DRAWING OF THE TABLE .......................................................................................9
IX. SETTING THE UPPER STOP POSITION OF THE NEEDLE BAR ........................10
X. SETTING THE RAVELING PREVENTION PARAMETER .......................................12
– 1 –
I. SPECIFICATIONS
Model name High-speed, cylinder-bed coverstitch machine
Model MF-7900 series
Stitch type ISO standard 406, 407, 602, and 605
Example of application
For preventing thread from raveling at the end of hemming or other processes
Sewing speed Max. 6,000 sti/min (at the time of intermittent operation) Direct-drive type
Speed of stitch at the delivery: 4,500 sti/min (at the time of intermittent operation)
Needle gauge 5.6 mm and 6.4 mm 3-needle .....
2-needle ..... 4.0 mm and 4.8 mm
Dierential feed ratio 1 : 0.9 to 1 : 1.4 (stitch length : less than 2.5 mm) * Only for H23
(1 : 0.6 to 1 :1 .1, when the dierential link hinge screw is changed)
Micro-dierential feed adjustment mechanism is provided. (Micro-adjustment)
Stitch length 0.9 mm to 3.6 mm (can be adjusted up to 4.5 mm)
Needle UY128GAS #9S to #14S (standard #10S)
Needle bar stroke 31mm (33 mm when the eccentric pin is changed over)
Dimensions (Height) 450 x (Width) 456 x (Length) 299
Weight 45 kg (With pneumatic type thread trimmer)
Lift of presser foot 8 mm (needle gauge : 5.6 mm without top covering), and 5 mm (with top covering)
Micro-lifter mechanism is provided.
Feed adjustment
method
Main feed ............... dial type stitch pitch adjustment method
Dierential feed lever adjustment method (micro-adjustment mechanism is provided.) .....
Looper mechanism Spherical rod drive method
Lubricating system Forced lubrication method by gear pump
Lubricating oil JUKI GENUINE OIL 18
Oil reservoir capacity Oil gauge lower line : 600 cc to upper line : 900 cc
Installation Table-mount type, Semi-submerged type
Noise - Equivalent continuous emission sound pressure level (L
pA) at the workstation:
A-weighted value of 79.5 dB; (Includes K
pA = 2.5 dB); according to ISO 10821- C.6.2 -ISO 11204 GR2 at 4,500
sti/min.
Remove xed band ❶ for transportation before setting
up the sewing machine.
II. AT THE BEGINNING
❶
Specyfikacje produktu
| Marka: | Juki |
| Kategoria: | Naaimachine |
| Model: | UT59 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Juki UT59, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Naaimachine Juki
19 Września 2024
19 Września 2024
18 Września 2024
5 Września 2024
4 Września 2024
4 Września 2024
4 Września 2024
3 Września 2024
2 Września 2024
2 Września 2024
Instrukcje Naaimachine
- Naaimachine AEG
- Naaimachine LERAN
- Naaimachine Livoo
- Naaimachine SilverCrest
- Naaimachine Toyota
- Naaimachine Singer
- Naaimachine Medion
- Naaimachine Brother
- Naaimachine Husqvarna
- Naaimachine Emerio
- Naaimachine Baby Lock
- Naaimachine Victoria
- Naaimachine Bernina
- Naaimachine Necchi
- Naaimachine Kenmore
- Naaimachine Huskystar
- Naaimachine Dürkopp Adler
- Naaimachine Veritas
- Naaimachine Pfaff
- Naaimachine Tesco
- Naaimachine Carina
- Naaimachine Alfa
- Naaimachine Janome
- Naaimachine Guzzanti
- Naaimachine Anker-Bernette
- Naaimachine Elna
- Naaimachine Jocca
- Naaimachine Bernette
- Naaimachine RCE
- Naaimachine Lifetec
- Naaimachine Union Special
- Naaimachine Vendomatic
- Naaimachine Lewenstein
- Naaimachine Silver
- Naaimachine Sinojo
- Naaimachine Gritzner
- Naaimachine W6
Najnowsze instrukcje dla Naaimachine
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024
18 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024