Instrukcja obsługi Juki UT51
Juki
maszyna do szycia
UT51
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Juki UT51 (17 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/17
ENGLISH
INStructIoN MaNuaL
MF-7900(D)/ut51,52
i
CONTENTS
!. SPECIFICATIONS ..........................................................................................................1
@. AT THE BEGINNING ......................................................................................................1
#. INSTALLING THE ACCESSORIES ...............................................................................2
1. Installing the presser lifting solenoid ........................................................................................... 2
2. Installation and setting SC-921 ...................................................................................................... 3
(1) Installing the SC-921 on the table ( Table-mount type ) ............................................................................3
(2) Installing the SC-921 on the table ( Semi-submerged type ) ....................................................................3
(3) Connecting the cords ...................................................................................................................................4
(4) Setting procedure of the machine head .....................................................................................................5
(5) Setting the lower stop position of the needle bar .....................................................................................6
(6) Setting of the auto lifter function ................................................................................................................7
(7) Setting of the pedal stroke...........................................................................................................................7
$. THREADING THE MACHINE HEAD .............................................................................8
%. ADJUSTING THE LOOPER THREAD TRIMMER MECHANISM ..................................9
1. Adjusting the looper thread trimmer solenoid ............................................................................. 9
2. Adjusting the Lower knife ............................................................................................................ 10
3. Adjusting the position of clamp pressure adjusting spring ..................................................... 10
4. Adjusting the knife engagement and the knife pressure adjusting spring ............................. 10
5. Adjusting the pressure of clamp spring ..................................................................................... 10
6. Initial position of the looper thread trimmer mechanism ...........................................................11
7. Adjusting the stopper ....................................................................................................................11
8. Adjusting the height of the lower knife ........................................................................................11
9. Adjusting the lower knife holder guide ........................................................................................11
10. Adjusting the longitudinal position of the blade point of lower knife ...................................... 12
11. Adjusting the thread trimmer sensor .......................................................................................... 12
^. ADJUSTING THE THREAD RELEASE MECHANISM ................................................13
1. Adjusting the disk-rise ................................................................................................................. 13
2. Adjusting the thread release hook .............................................................................................. 13
&. ADJUSTING THE TOP COVERING THREAD TRIMMER MECHANISM ....................14
1. Adjusting the engagement of knives .......................................................................................... 14
2. Adjusting the pressure of clamp spring ..................................................................................... 14
3. Adjusting the position of the blade point of moving knife ........................................................ 14
*. MAINTENANCE ...........................................................................................................15
1. Cleaning the motor fan ................................................................................................................. 15
– 1 –
!. SPECIFICATIONS
Model name High-speed, cylinder-bed coverstitch machine Semi-dry head, high-speed, cylinder-bed
coverstitch machine
Model MF-7900 series MF-7900D series
Stitch type ISO standard 406, 407, 602, and 605
Example of application
Hemming and covering for knits and general knitted fabrics
Sewing speed Max. 6,500 sti/min (at the time of intermittent operation)
V-belt type
Max. 6,000 sti/min (at the time of intermittent operation)
Direct-drive type
Speed of stitch at the delivery:
4,500 sti/min (at the time of intermittent operation)
Max. 5,000 sti/min (at the time of intermittent operation)
V-belt type
Max. 5,000 sti/min (at the time of intermittent operation)
Direct-drive type
Speed of stitch at the delivery:
4,000 sti/min (at the time of intermittent operation)
Needle gauge 3-needle ..... 5.6 mm and 6.4 mm
2-needle ..... 3.2 mm, 4.0 mm and 4.8 mm
Differential feed ratio 1 : 0.9 to 1 : 1.8 (stitch length : less than 2.5 mm)
(1 : 0.6 to 1 : 1.1, when the differential link hinge screw is changed)
Micro-differential feed adjustment mechanism is provided. (Micro-adjustment)
Stitch length 0.9 mm to 3.6 mm (can be adjusted up to 4.5 mm)
Needle UY128GAS #9S to #14S (standard #10S) UY128GAS #9S to #12S (standard #10S)
Needle bar stroke 31mm (33 mm when the eccentric pin is changed over)
Dimensions (Height) 450 x (Width) 456 x (Length) 331
Weight 48 kg (With solenoid type thread trimmer) , 42 kg
Lift of presser foot 8 mm (needle gauge : 5.6 mm without top covering), and 5 mm (with top covering)
Micro-lifter mechanism is provided.
Feed adjustment
method
Main feed ............... dial type stitch pitch adjustment method
Differential feed ..... lever adjustment method (micro-adjustment mechanism is provided.)
Looper mechanism Spherical rod drive method
Lubricating system Forced lubrication method by gear pump
Lubricating oil JUKI GENUINE OIL 18
Oil reservoir capacity Oil gauge lower line : 600 cc to upper line : 900 cc
Installation Table-mount type, Semi-submerged type
Noise - Equivalent continuous emission sound pressure level
(LpA) at the workstation:
A-weighted value of 79.5 dB; (Includes K
pA = 2.5 dB);
according to ISO 10821- C.6.2 -ISO 11204 GR2 at
4,500 sti/min.
- Equivalent continuous emission sound pressure level
(LpA) at the workstation:
A-weighted value of 76.5 dB; (Includes K
pA = 2.5 dB);
according to ISO 10821- C.6.2 -ISO 11204 GR2 at
4,000 sti/min.
@. AT THE BEGINNING
Remove xed band
1 for transportation before setting
up the sewing machine.
1
Specyfikacje produktu
| Marka: | Juki |
| Kategoria: | maszyna do szycia |
| Model: | UT51 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Juki UT51, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna do szycia Juki
12 Stycznia 2025
30 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
14 Października 2024
5 Października 2024
3 Października 2024
1 Października 2024
30 Września 2024
30 Września 2024
Instrukcje maszyna do szycia
- maszyna do szycia AEG
- maszyna do szycia LERAN
- maszyna do szycia Livoo
- maszyna do szycia SilverCrest
- maszyna do szycia Easy Home
- maszyna do szycia Toyota
- maszyna do szycia Singer
- maszyna do szycia Medion
- maszyna do szycia Blaupunkt
- maszyna do szycia Siemens
- maszyna do szycia Ambiano
- maszyna do szycia Prixton
- maszyna do szycia Brother
- maszyna do szycia Husqvarna
- maszyna do szycia Primera
- maszyna do szycia Emerio
- maszyna do szycia Kayser
- maszyna do szycia TriStar
- maszyna do szycia Privileg
- maszyna do szycia Baby Lock
- maszyna do szycia Victoria
- maszyna do szycia Bernina
- maszyna do szycia Solac
- maszyna do szycia Necchi
- maszyna do szycia Kenmore
- maszyna do szycia Huskystar
- maszyna do szycia Dürkopp Adler
- maszyna do szycia Veritas
- maszyna do szycia Pfaff
- maszyna do szycia Łucznik
- maszyna do szycia Husqvarna-Viking
- maszyna do szycia Tesco
- maszyna do szycia EasyMaxx
- maszyna do szycia Carina
- maszyna do szycia Lervia
- maszyna do szycia Kunft
- maszyna do szycia Alfa
- maszyna do szycia Janome
- maszyna do szycia Guzzanti
- maszyna do szycia Müller
- maszyna do szycia Minerva
- maszyna do szycia Bestron
- maszyna do szycia Aigger
- maszyna do szycia Anker-Bernette
- maszyna do szycia Sinbo
- maszyna do szycia Jata
- maszyna do szycia Elna
- maszyna do szycia Mellerware
- maszyna do szycia Termozeta
- maszyna do szycia Jocca
- maszyna do szycia Bernette
- maszyna do szycia Yamato
- maszyna do szycia RCE
- maszyna do szycia Hema
- maszyna do szycia Lifetec
- maszyna do szycia Union Special
- maszyna do szycia Vendomatic
- maszyna do szycia Home Electric
- maszyna do szycia Empisal
- maszyna do szycia Crofton
- maszyna do szycia Lewenstein
- maszyna do szycia Durabase
- maszyna do szycia Meister Craft
- maszyna do szycia Micromaxx
- maszyna do szycia Yamata
- maszyna do szycia Weasy
- maszyna do szycia Silver
- maszyna do szycia Prince
- maszyna do szycia Hofmann
- maszyna do szycia Kohler
- maszyna do szycia Sinojo
- maszyna do szycia Gritzner
- maszyna do szycia W6
- maszyna do szycia Zippy
- maszyna do szycia Feiyue
- maszyna do szycia Mediashop
- maszyna do szycia ER
- maszyna do szycia Novamatic
- maszyna do szycia Siemssen
- maszyna do szycia Mio Star
- maszyna do szycia SteamMax
Najnowsze instrukcje dla maszyna do szycia
15 Stycznia 2025
14 Stycznia 2025
14 Stycznia 2025
14 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025