Instrukcja obsługi Juki S161
Juki
maszyna do szycia
S161
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Juki S161 (4 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
– 1 –
INSTRUCTION MANUAL
Swing-type gathering device
S159・S160
S161・S162
No.03
29114915
1. Name
Swing-type gathering device for the MO-3000, MO-6000 series of overlock/safety stitch machine
S159 : Swing-type gathering device for safety stitch machines (pedal-operated)
S160 : Swing-type gathering device for safety stitch machines (lever-operated)
S161 : Swing-type gathering device for overlock machines (pedal-operated)
S162 : Swing-type gathering device for overlock machines (lever-operated)
2. Applicable models
MO-3 △04E-0E6 MO-3 △04E-0F6 MO-6 △14-BE6
MO-3 △12E-DF6 MO-3 △14E-BE6 MO-6 △16-DE4
MO-3 △14E-BD6 MO-3 △16E-DE4 MO-6 △16-FF6
MO-3 △14E-BF6 MO-3 △16E-FF6
MO-3 △16E-DD4 MO-3 △43E-FBD6
MO-3 △16E-DF6 MO-3 △16E-RH6
3. Specications
4.
Parts to be replaced when the gathering device is used with the overlock/safety stitch machine
To operate an overlock/safety stitch machine in combination with the S159, S160, S161 or S162 gathering device, the gauge
components need to be changed accordingly. Choose the appropriate parts from among those listed in the table below.
(1) Safety stitch machines (MO-3 △16E, 3 △43E, 6 △16) S159 or 161
Read safety instructions carefully and understand them before using.
Retain this Instruction Manual for future reference.
CAUTION :
This Instruction Manual is intended for the S159/S160/S161/S162. Read and fully understand the
instructions given under “IMPORTANT SAFETY INSTRUCTIONS” in the Instruction Manual the MO-
3000, MO-6000 series before putting the machine into service when this device is installed to the
MO-3000, MO-6000 series.
In addition, to emphasize the S159/S160/S161/S162, some illustrations of the MO-3000, MO-6000
seriesaresimplied.Also,illustrationsofthesafetydevicesarepartiallyomitted.
＊ Use the gathering foot onry when the RH6 gauge set is used.
Application For continuous gathering and partial shirring on light-weight materials including
knnitted fabric, light-weight knits and broadcloth.
Sewing speed Up to 7000 rpm
Differential feed ratio Overlock machines 1 : 3 Safety stitch machines 1 : 3
(Adjust appropriately in accordance with the type of material to be used.)
Lift of the presser foot Overlock machine : 6 mm Safety stitch machine : 6 mm
(5 mm only for RH6)
Gauge size
DD4 DE4 DF6 FF6 RH6 FBD6
Name
Presser joint 12154654 12154654 12154753 12154852 12154951 11975950
Main feed dog 12170700 12170700 12170809 12170908 12170908 11884806
Differential feed dog 12172904 12172904 12173407 12173407 12173407 11885902
Throat plate R4508J0DD0B R4508J6ED0B R4608J0FD0A R4612J6FD0A R4617J0HD0A R4612J0DE02
＊Gathering foot ーーーー
＊MAS0510800A
ー
– 2 –
WARNING :
So as to prevent accidents caused by abrupt start of the machine, start the job after turning OFF
thepowertothemachineandconrmingthatthesewingmachinewillnotrunevenbydepressing
the start pedal.
(2) Overlock machines (MO-3 △04E, 3 △14E, 6 △14) S160 or 162
5. Adjusting the gathering foot
Gathering foot
Section C Screw
Bracket A
B
D
E
F
(1) Adjust the gathering foot so that it comes in
parallel contact with the top surface of the
throat plate over the length.
a. Temporarily tighten screw A, loosen screw B, and
adjust the parallelism between the gathering foot and
the throat plate.
b. After the completion of sewing, tighten screw
B and
screw A.
(2) Adjusting the vertical position and the lateral
position of the gathering foot
a. Loosen two screws D and screw E in the thrust collar,
and adjust the position of the gathering foot, in the
lateral direction, so that it is 3 mm spaced from the
edge of the feed dog.
Gathering foot
Adjust the gathering foot by
pressing down section C.
Adjust the gathering foot by
pressing up section C.
Good
Not good
The gathering foot comes
in parallel contact with the
throat plate.
Gathering foot
Gathering foot
(2-row feed dog)(3-row feed dog)
3 mm 3 mm
Throat plate
Gauge size
0E6 0F6 BD6 BE6 BF6 DF6
Name
Presser joint 11878857 11974250 11879350 11879350 12153052 11974052
Main feed dog 11883402 11883402 11883402 11883402 11883402 11884608
Differential feed dog 12171807 12171807 12171807 12171807 12171807 12171906
Throat plate R4300J0EE0B R4300J0FE0A R4305J0DE0A R4305J6EE0A R4617J0HD0A R4308J0FE00
– 3 –
Gathering foot
A clearance of 1 to
2 mm is necessary.
F
D
Throat plate
6. Adjusting the lifting amount of the gathering foot (S159, S160)
a. Loosen screw G, and adjust the lifting amount of the
gathering foot by moving H up or down. The standard
lift of the gathering foot is 3 mm.
7. Modifying the table (fully-sunken type)
When using the S159 or S160 with a fully-sunken type
table, modify the dimensions of the table as indicated in
the gure on the left.
WARNING :
So as to prevent accidents caused by abrupt start of the machine, start the job after turning OFF
thepowertothemachineandconrmingthatthesewingmachinewillnotrunevenbydepressing
the start pedal.
(3) Adjusting the longitudinal position of the
gathering foot
As the standard longitudinal position of the gathering foot,
the gathering foot must reach the 2nd or 3rd tooth of the
differential feed dog of the overlock machine or the 1st
or 2nd tooth of the feed dog of the safety stitch machine
when the differential feed dog completes feeding action.
The size of gathers is changed by moving the gathering
foot back or forth. Adjust the longitudinal position of the
gathering foot in accordance with the material to be used.
(4) Adjusting the pressure of the gathering foot
a.
Standard pressure of the gathering foot, as measured
at the top end of the gathering foot, is 14.7 N. However,
adjust it properly in accordance with the material to be
used. (Adjust the pressure using adjusting knob
F
.)
Differential feed dogMain feed dog
Two or three teeth (overlock machine)
When the differential feed is maximized
with the feed pitch set to 2.2 mm
(mm)
95 52
70
1010
55
Throat plate
G
H
Presser foot
6 mm
3 mm
Specyfikacje produktu
| Marka: | Juki |
| Kategoria: | maszyna do szycia |
| Model: | S161 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Juki S161, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna do szycia Juki
14 Października 2024
5 Października 2024
3 Października 2024
1 Października 2024
30 Września 2024
30 Września 2024
30 Września 2024
30 Września 2024
29 Września 2024
27 Września 2024
Instrukcje maszyna do szycia
- maszyna do szycia AEG
- maszyna do szycia LERAN
- maszyna do szycia Livoo
- maszyna do szycia SilverCrest
- maszyna do szycia Easy Home
- maszyna do szycia Toyota
- maszyna do szycia Singer
- maszyna do szycia Medion
- maszyna do szycia Prixton
- maszyna do szycia Brother
- maszyna do szycia Husqvarna
- maszyna do szycia Primera
- maszyna do szycia Emerio
- maszyna do szycia Kayser
- maszyna do szycia Baby Lock
- maszyna do szycia Victoria
- maszyna do szycia Bernina
- maszyna do szycia Solac
- maszyna do szycia Necchi
- maszyna do szycia Kenmore
- maszyna do szycia Huskystar
- maszyna do szycia Dürkopp Adler
- maszyna do szycia Veritas
- maszyna do szycia Pfaff
- maszyna do szycia Łucznik
- maszyna do szycia Husqvarna-Viking
- maszyna do szycia Tesco
- maszyna do szycia Carina
- maszyna do szycia Alfa
- maszyna do szycia Janome
- maszyna do szycia Guzzanti
- maszyna do szycia Minerva
- maszyna do szycia Anker-Bernette
- maszyna do szycia Sinbo
- maszyna do szycia Jata
- maszyna do szycia Elna
- maszyna do szycia Termozeta
- maszyna do szycia Jocca
- maszyna do szycia Bernette
- maszyna do szycia Yamato
- maszyna do szycia RCE
- maszyna do szycia Lifetec
- maszyna do szycia Union Special
- maszyna do szycia Vendomatic
- maszyna do szycia Empisal
- maszyna do szycia Crofton
- maszyna do szycia Lewenstein
- maszyna do szycia Meister Craft
- maszyna do szycia Micromaxx
- maszyna do szycia Yamata
- maszyna do szycia Weasy
- maszyna do szycia Silver
- maszyna do szycia Prince
- maszyna do szycia Kohler
- maszyna do szycia Sinojo
- maszyna do szycia Gritzner
- maszyna do szycia W6
- maszyna do szycia Zippy
- maszyna do szycia Feiyue
- maszyna do szycia Mediashop
- maszyna do szycia ER
- maszyna do szycia Novamatic
- maszyna do szycia Siemssen
- maszyna do szycia Mio Star
- maszyna do szycia SteamMax
Najnowsze instrukcje dla maszyna do szycia
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024
15 Października 2024