Instrukcja obsługi Juki PLC-2760NVM
Juki
maszyna do szycia
PLC-2760NVM
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Juki PLC-2760NVM (42 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/42
PLC-2760NVM
INSTRUCTION MANUAL
CONTENTS
1. Specications ................................................................................................................. 1
2. Threading the machine head ......................................................................................... 2
3. Take-up thread guide ..................................................................................................... 3
4. Pneumatic components (when the pneumatic center guide is used) ....................... 4
5. Setting the incidental device ......................................................................................... 6
5-1. Setting the ON/OFF status of the center guide ................................................... 6
5-2. Setting the optional input for the the center guide ............................................. 8
5-3. Setting the optional output for the center guide ................................................ 9
6. Adjusting the hook needle guard ................................................................................ 10
7. Adjusting the bobbin case opening lever .................................................................. 10
8. Adjusting the timing of the opener ............................................................................. 11
9. How to correct the main shaft reference angle ......................................................... 12
10. Position of the thread trimmer cam .......................................................................... 14
11. Adjusting the position of the moving knife .............................................................. 15
12. Adjusting the position of the clamp spring ............................................................. 16
13. 17 How to adjust the cam timing ....................................................................................
13-1. 17 Timing of the vertical feed cam ........................................................................
13-2. Top feed cam timing .......................................................................................... 18
14. 20 Needle sway (Adjusting the bottom feed amount) ..................................................
15. Tension correction ..................................................................................................... 21
15-1. Tension correction and sewing speed ............................................................. 22
15-2. Tension correction and remaining amount of bobbin thread ........................ 23
16. Thread clamp device .................................................................................................. 25
16-1. How to install the thread clamp device ............................................................ 25
16-2. How to set up the thread clamp device ............................................................ 28
16-3.
How to set the thread clamp operation while the presser foot is in its upper
position.................................................................................................................... 31
17. How to replace the hook cover ................................................................................. 32
18. How to install the oil lter .......................................................................................... 34
19. 35 Counter function .........................................................................................................
19-1. 35 Displaying the sewing screen under the counter display mode ...................
19-2. Types of the counter .......................................................................................... 35
19-3. 36How to set the counter ......................................................................................
19-4. 40How to reset the count-completion state .........................................................
CAUTION
This Instruction Manual for the PLC-2760NVM only describes their differences from the
standard models (PLC-2760V).
For safety-related information, carefully read and fully understand "Safety precautions"
described in the Instruction Manual for the standard models before using your sewing ma-
chine.
– 1 –
1. Specications
PLC-2760NVMA70BBZ
No. Item Application
1 Model PLC-2760NVM
2 Model name 2-needle, post-bed, unison-feed, lockstitch machine with vertical-axis hook
3 Application Medium- to heavy-weight materials, car seat, furniture
4 Sewing speed Max. 2,500 sti/min
(Refer to "10. SEWING SPEED TABLE" in the Instruction Manual for the standard
model.)
5 Needle Ferd. SCHMETZ 134 - 35 (Nm 100 to Nm 180) (Standard : Nm 140)
6 Applicable thread size for sewing #30 to #5 (Europe 60 / 3-20 / 3)
7 Applicable thread size to be cut #30 to #5 (Europe 60 / 3-20 / 3)
8 Stitch length Max. 12 mm (forward/reverse feed)
However, the machine is shipped with its stitch length restricted to 7 mm.
9 Presser foot lift 20 mm
10 Presser foot pressure control Electric control (driven by a pulse motor)
11 Horizontal feed control Electric control (driven by a pulse motor)
12 Alternate vertical feed control Electric control (driven by a pulse motor)
13 Reverse stitch adjusting method Pulse motor driving (with touch-back switch)
14 Number of patterns Sewing pattern ............................ 99 patterns (For the polygonal shape sewing, as
many as 10 patterns can be registered.)
Cycle sewing pattern 9 patterns ...................
Custom-pitch pattern 20 patterns ...................
Condensation custom pattern 9 patterns .....
15 Thread take-up Link thread take-up
16 Needle bar stroke 40 mm
17 Amount of the alternate vertical
movement
MAX. 9 mm
However, the machine is shipped with its stitch length restricted to 6.5 mm.
18 Needle thread tension Electric control (driven by a solenoid)
19 Hook Vertical-axis 1.6-fold hook (Latch type)
20 Feed mechanism Box feed
21 Driv e syst em/Top a nd b otto m
vertical axis drive
Main shaft direct drive system/Timing belt
22 Lubrication Automatic lubrication by semi-dry head plunger pump (with oil gauge)
23 Lubricating oil JUKI New Defrix Oil No. 1 (equivalent to ISO standard VG7)
or JUKI MACHINE OIL No. 7
24 Bed size 643 mm × 178 mm
25 Space under the arm 347 mm × 298 mm
26 Hand wheel size Outer diameter : ø123 mm
27 Motor/Control box DD motor : 800W AC servomotor
Control box : SC-952
28 Machine head weight 88 kg
29 Rated power consumption 600 VA
30 Noise - Equivalent continuous emission sound pressure level (L
pA) at the
workstation:
A-weighted value of 83.5 dB; (Includes K
pA = 2.5 dB); according to ISO
10821- C.6.2 - ISO 11204 GR2 at 2,500 sti/min.
- Sound power level (L
WA);
A-weighted value of 90.5 dB; (Includes K
WA = 2.5 dB); according to ISO
10821- C.6.2 - ISO 3744 GR2 at 2,500 sti/min.
Specyfikacje produktu
| Marka: | Juki |
| Kategoria: | maszyna do szycia |
| Model: | PLC-2760NVM |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Juki PLC-2760NVM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna do szycia Juki
12 Stycznia 2025
30 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
14 Października 2024
5 Października 2024
3 Października 2024
1 Października 2024
30 Września 2024
30 Września 2024
Instrukcje maszyna do szycia
- maszyna do szycia AEG
- maszyna do szycia LERAN
- maszyna do szycia Livoo
- maszyna do szycia SilverCrest
- maszyna do szycia Easy Home
- maszyna do szycia Toyota
- maszyna do szycia Singer
- maszyna do szycia Medion
- maszyna do szycia Blaupunkt
- maszyna do szycia Siemens
- maszyna do szycia Ambiano
- maszyna do szycia Prixton
- maszyna do szycia Brother
- maszyna do szycia Husqvarna
- maszyna do szycia Primera
- maszyna do szycia Emerio
- maszyna do szycia Kayser
- maszyna do szycia TriStar
- maszyna do szycia Privileg
- maszyna do szycia Baby Lock
- maszyna do szycia Victoria
- maszyna do szycia Bernina
- maszyna do szycia Solac
- maszyna do szycia Necchi
- maszyna do szycia Kenmore
- maszyna do szycia Huskystar
- maszyna do szycia Dürkopp Adler
- maszyna do szycia Veritas
- maszyna do szycia Pfaff
- maszyna do szycia Łucznik
- maszyna do szycia Husqvarna-Viking
- maszyna do szycia Tesco
- maszyna do szycia EasyMaxx
- maszyna do szycia Carina
- maszyna do szycia Lervia
- maszyna do szycia Kunft
- maszyna do szycia Alfa
- maszyna do szycia Janome
- maszyna do szycia Guzzanti
- maszyna do szycia Müller
- maszyna do szycia Minerva
- maszyna do szycia Bestron
- maszyna do szycia Aigger
- maszyna do szycia Anker-Bernette
- maszyna do szycia Sinbo
- maszyna do szycia Jata
- maszyna do szycia Elna
- maszyna do szycia Mellerware
- maszyna do szycia Termozeta
- maszyna do szycia Jocca
- maszyna do szycia Bernette
- maszyna do szycia Yamato
- maszyna do szycia RCE
- maszyna do szycia Hema
- maszyna do szycia Lifetec
- maszyna do szycia Union Special
- maszyna do szycia Vendomatic
- maszyna do szycia Home Electric
- maszyna do szycia Empisal
- maszyna do szycia Crofton
- maszyna do szycia Lewenstein
- maszyna do szycia Durabase
- maszyna do szycia Meister Craft
- maszyna do szycia Micromaxx
- maszyna do szycia Yamata
- maszyna do szycia Weasy
- maszyna do szycia Silver
- maszyna do szycia Prince
- maszyna do szycia Hofmann
- maszyna do szycia Kohler
- maszyna do szycia Sinojo
- maszyna do szycia Gritzner
- maszyna do szycia W6
- maszyna do szycia Zippy
- maszyna do szycia Feiyue
- maszyna do szycia Mediashop
- maszyna do szycia ER
- maszyna do szycia Novamatic
- maszyna do szycia Siemssen
- maszyna do szycia Mio Star
- maszyna do szycia SteamMax
Najnowsze instrukcje dla maszyna do szycia
15 Stycznia 2025
14 Stycznia 2025
14 Stycznia 2025
14 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025