Instrukcja obsługi Juki PLC-2710NVM
Juki
Naaimachine
PLC-2710NVM
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Juki PLC-2710NVM (51 stron) w kategorii Naaimachine. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/51
PLC-2710NVM
INSTRUCTION MANUAL
CONTENTS
1. Specications ................................................................................................................. 1
2. Threading the machine head ......................................................................................... 2
3. Take-up thread guide ..................................................................................................... 3
4. Adjusting the hook needle guard .................................................................................. 4
5. Adjusting the bobbin case opening lever .................................................................... 4
6. Adjusting the timing of the opener ............................................................................... 5
7. How to correct the main shaft reference angle ........................................................... 6
8. Position of the thread trimmer cam .............................................................................. 8
9. Adjusting the position of the moving knife .................................................................. 9
10. Adjusting the position of the clamp spring ............................................................. 10
11. 11 How to adjust the cam timing ....................................................................................
11-1. Timing of the vertical feed cam ......................................................................... 11
11-2. Top feed cam timing ........................................................................................... 12
12. 14 Needle sway (Adjusting the bottom feed amount) ..................................................
13. Tension correction ..................................................................................................... 15
13-1. Tension correction and sewing speed ............................................................. 16
13-2. Tension correction and remaining amount of bobbin thread ........................ 17
14. Thread clamp device .................................................................................................. 19
14-1. How to install the thread clamp device ............................................................ 19
14-2. How to set up the thread clamp device ............................................................ 22
14-3. How to set the thread clamp operation while the presser foot is in its upper
position ................................................................................................................. 25
15. How to replace the hook cover ................................................................................. 26
16. How to install the oil lter .......................................................................................... 28
17.
How to replace the right hook with the left hook for the 1-needle sewing machine .................. 29
CAUTION
This Instruction Manual for the PLC-2710NVM only describes their differences from the
standard models (PLC-2710V).
For safety-related information, carefully read and fully understand "Safety precautions"
described in the Instruction Manual for the standard models before using your sewing ma-
chine.
– 1 –
1. Specications
PLC-2710NVM70BBZ
No. Item Application
1 Model PLC-2710NVM
2 Model name 1-needle, post-bed, unison-feed, lockstitch machine with vertical-axis hook
3 Application Medium- to heavy-weight materials, car seat, furniture
4 Sewing speed Max. 2,500 sti/min
(Refer to "10. SEWING SPEED TABLE" in the Instruction Manual for the standard
model.)
5 Needle Ferd. SCHMETZ 134 to 35 (Nm 100 to Nm 180) (Standard : Nm 140)
6 Applicable thread size for sewing # 30 to # 5 (Europe 60 / 3 to 20 / 3)
7 Applicable thread size to be cut # 30 to # 5 (Europe 60 / 3 to 20 / 3)
8 Stitch length Max. 12 mm (forward/reverse feed)
However, the machine is shipped with its stitch length restricted to 7 mm.
9 Presser foot lift 20 mm
10 Presser foot pressure control Electric control (driven by a pulse motor)
11 Horizontal feed control Electric control (driven by a pulse motor)
12 Alternate vertical feed control Electric control (driven by a pulse motor)
13 Reverse stitch adjusting method Pulse motor driving (with touch-back switch)
14 Number of patterns Sewing pattern ............................ 99 patterns (For the polygonal shape sewing, as
many as 10 patterns can be registered.)
Cycle sewing pattern 9 patterns ...................
Custom-pitch pattern 20 patterns ...................
Condensation custom pattern 9 patterns .....
15 Thread take-up Link thread take-up
16 Needle bar stroke 40 mm
17 Amount of the alternate vertical
movement
Max. 9 mm
However, the machine is shipped with its stitch length restricted to 6.5 mm.
18 Needle thread tension Electric control (driven by a solenoid)
19 Hook Full-rotary vertical-axis 1.6-fold hook (Latch type)
20 Feed mechanism Box feed
21 Drive syste m/ Top and bot tom
vertical axis drive
Main shaft direct drive system/Timing belt
22 Lubrication Automatic lubrication by semi-dry head plunger pump (with oil gauge)
23 Lubricating oil JUKI New Defrix Oil No. 1 (equivalent to ISO standard VG7)
or JUKI MACHINE OIL No. 7
24 Bed size 643 mm × 178 mm
25 Space under the arm 347 mm × 298 mm
26 Hand wheel size Outer diameter : ø123 mm
27 Motor/Control box DD motor : 800W AC servomotor
Control box : SC-952
28 Machine head weight 85 kg
29 Rated power consumption 600 VA
30 Noise - Equivalent continuous emission sound pressure level (L
pA) at the
workstation:
A-weighted value of dB; (Includes K83,5 pA = 2.5 dB); according to ISO
10821- C.6.2 - ISO 11204 GR2 at 2,500 sti/min.
- Sound power level (L
WA);
A-weighted value of 90.5 dB; (Includes K
WA = 2.5 dB); according to ISO
10821- C.6.2 - ISO 3744 GR2 at 2,500 sti/min.
Specyfikacje produktu
Marka: | Juki |
Kategoria: | Naaimachine |
Model: | PLC-2710NVM |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Juki PLC-2710NVM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Naaimachine Juki
19 Września 2024
19 Września 2024
18 Września 2024
5 Września 2024
4 Września 2024
4 Września 2024
4 Września 2024
3 Września 2024
2 Września 2024
2 Września 2024
Instrukcje Naaimachine
- Naaimachine AEG
- Naaimachine LERAN
- Naaimachine Livoo
- Naaimachine SilverCrest
- Naaimachine Toyota
- Naaimachine Singer
- Naaimachine Medion
- Naaimachine Brother
- Naaimachine Husqvarna
- Naaimachine Emerio
- Naaimachine Baby Lock
- Naaimachine Victoria
- Naaimachine Bernina
- Naaimachine Necchi
- Naaimachine Kenmore
- Naaimachine Huskystar
- Naaimachine Dürkopp Adler
- Naaimachine Veritas
- Naaimachine Pfaff
- Naaimachine Tesco
- Naaimachine Carina
- Naaimachine Alfa
- Naaimachine Janome
- Naaimachine Guzzanti
- Naaimachine Anker-Bernette
- Naaimachine Elna
- Naaimachine Jocca
- Naaimachine Bernette
- Naaimachine RCE
- Naaimachine Lifetec
- Naaimachine Union Special
- Naaimachine Vendomatic
- Naaimachine Lewenstein
- Naaimachine Silver
- Naaimachine Sinojo
- Naaimachine Gritzner
- Naaimachine W6
Najnowsze instrukcje dla Naaimachine
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024
18 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024