Instrukcja obsługi Juki HZL-60

Juki Naaimachine HZL-60

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Juki HZL-60 (28 stron) w kategorii Naaimachine. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/28
Portable Zigzag Sewing Machine
INSTRUCTION MANUAL
HZL-30Z / HZL-60
®
IMPORTANT SAFETY INSTRUCTIONS
“When using an electrical appliance, basic safety precautions should always be followed, including the following:”
“Read all instructions before using this sewing machine.”
DANGER_____To reduce the risk of electric shock:
1. “An appliance should never be left unattended when plugged in. Always unplug this appliance from the electric
outlet immediately after using and before cleaning.”
2. “Always unplug before relamping. Replace bulb with same type rated 15 Watts.
WARNING_____To reduce the risk of burns, fire, electric shock, or injury to persons:”
1. “Do not allow to be used as a toy. Close attention is necessary when this appliance is used by or near children.
2. “Use this appliance only for its intended use as described in this manual. Use only attachments recommended
by the manufacturer as contained in this manual.
3.Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped
or damaged, or dropped into water. Return the appliance to the nearest authorized dealer or service center for
examination, repair, electrical or mechanical adjustment.”
4. “Never operate the appliance with any air openings blocked. Keep ventilation openings of the sewing machine
and foot controller free from the accumulation of lint, dust and loose cloth.”
5. “Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
6. “Always use the proper needle plate. The wrong plate can cause the needle to break.
7. “Do not use bent needles.”
8. “Do not pull or push fabric while stitching. It may deflect the needle causing it to break.”
9. “Switch the sewing machine off ("O") when making any adjustments in the needle area, such as threading
needle, changing needle, threading bobbin, or changing presser foot and the like.
10. “Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making
any other user servicing adjustments mentioned in the instruction manual.”
11. “Never drop or insert any object into any opening.”
12. “Do not use outdoors.”
13. “Do not operate where aerosol (spray) products are being used or where oxygen is being administered.”
14. “To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
15. “Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.”
SAVE THESE INSTRUCTIONS
“This sewing machine is intended for household use only.”
Use only foot controller
with your HZL-30Z/HZL-60.
Be sure to turn power switch OFF and disconnect
the plug from the wall outlet before replacing the
sewing machine needle or lubricating the machine.
When not in use, be sure to turn power switch
OFF and unplug the machine.
Do not use thinner or other similar solvents to clean
the machine.
Do not expose the machine to direct sunlight or
humid atmosphere.
1
CONTENTS
Important safeguards ··········································· 1
Accessories ·························································· 2
Principal parts ······················································ 3,4
Major functions ···················································· 5,6
Winding the bobbin ············································· 7,8
Threading the machine ······································ 9,10
Changing the presser feet ··································· 11
How to remove and insert the needle ················· 11
Types of feet and their application ····················· 12
How to adjust thread tension ····························· 13
Stitch length of each stitch pattern ····················· 13
Fabric, thread and needle table ·························· 13
Straight stitch ··················································· 14,15
Reverse stitch ······················································ 15
Zigzag stitch ························································· 16
Stitch width vs stitch length
Overcasting ························································· 16
Buttonholes ······················································ 17,18
Corded Buttonholes ············································· 18
Inserting zippers ··················································· 19
Blind stitch ···························································· 20
Reinforcing stretch stitch ····································· 21
Patch work ··························································· 21
Optional parts ················································ 22~24
Invisible zipper foot / Even feed foot
Rolled hemming foot / Quilting attachment
Teflon-coated presser foot
How to replace light bulb ····································· 25
Cleaning ······························································· 25
Performance checklist ········································ 26
Specification table ················································ 26
2
* Standard presser foot (A) is equipped with machine.
Accessories
Screwdriver
Blindstitch presser foot (D)
Seam ripper
Zipper foot (B)
Overcasting foot (C)
Bobbins (3)
Standard presser foot (A)
Buttonhole foot (E)
HZL-30Z HZL-60 Auxiliary Bed
Speed controller
HZL-30Z HZL-60
HZL-30Z
You can keep instruction
manual at hard case. HZL-60
Needle pack
( )
HAx1 No.11 2P
No.14 1P
Spool cap (small)
HZL-30Z

Specyfikacje produktu

Marka: Juki
Kategoria: Naaimachine
Model: HZL-60

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Juki HZL-60, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Naaimachine Juki

Juki

Juki PLK-J4040RH Instrukcja

19 Września 2024
Juki

Juki LK-1850 Instrukcja

19 Września 2024
Juki

Juki PLK-J4040 Instrukcja

18 Września 2024
Juki

Juki UT59 Instrukcja

5 Września 2024
Juki

Juki Q141 Instrukcja

4 Września 2024
Juki

Juki ACF-172-1790 Instrukcja

4 Września 2024
Juki

Juki AC-172N-1790 Instrukcja

4 Września 2024
Juki

Juki MB-1373 Instrukcja

3 Września 2024
Juki

Juki LU-2810ES-7 Instrukcja

2 Września 2024

Instrukcje Naaimachine

Najnowsze instrukcje dla Naaimachine