Instrukcja obsługi JL Audio Stealthbox SB-TE-3G1-10TW1

JL Audio Niesklasyfikowane Stealthbox SB-TE-3G1-10TW1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JL Audio Stealthbox SB-TE-3G1-10TW1 (7 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/7

I N S T A L L A T I O N G U I D E

for the

SB-TE-3G1-10TW1

SKU# 94719

2017-Up Tesla Model 3

• Installation requires appropriate tools and safety equipment.

Professional installation is recommended.

• If you prefer to perform your own installation, please read this

installation guide completely before beginning.

• Before cutting or drilling, check for potential obstacles behind

mounting surfaces.

• Mount this product securely to prevent damage or injury in

severe conditions.

INSTALLATION

DIFFICULT Y:

EST IMAT ED T IME:

3 HOUR S

Enclosure Type: Sealed

Driver Type: 10TW1-2

Nominal Impedance: 2 ohms

Continuous Power Handling: 300 watts (RMS method)

Continued on Next Page

OUT

SB-TE-3G1-10TW1 INSTR_SKU# 011578

I N C LUD E D H A R D WAR E

Continued on Next Page

Page 2 • JL Audio, Inc., 2023

SB-TE-3G1-10TW1 INSTR_SKU# 011578

* Not Shown

BOM ID DescriptionQty SKU

1 4 154693 1/4”-20 1-1/4” Black-Oxide Button Head Screw

2 4 154694 1/4” Black-Oxide Split Lock Washer

3 4 153684 1/4” Black-Oxide Flat Washer

4 2 154606 Lower Bracket

5 2 154605 Upper Bracket

6 4 154695 1/4”-20 7/8” Black-Oxide Flanged Button Head Screw

7 4 150064 1/4”-20 Hex Nut

8 4 151098 1/4” Split Lock Washer

9 4 151021 1/4” Flat Washer

- 1 151240 52” Rubber Edge Trim*

P O W E R R E C O M M E N D AT I O N

JL Audio recommends high quality ampliers such as the JL Audio XDM300/1. The diagram below shows the recommended crossover settings for the XDM300/1. For a detailed description of the

amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

C O N N E C T I O N S

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your

Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for