Instrukcja obsługi JL Audio Stealthbox SB-T-TACDC/10W1v3

JL Audio Niesklasyfikowane Stealthbox SB-T-TACDC/10W1v3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JL Audio Stealthbox SB-T-TACDC/10W1v3 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

I N S T A L L A T I O N G U I D E

for the

SB-T-TACDC/10W1v3

SKU# 94312

2005 - 2011 Toyota Tacoma Double Cab

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system. With proper installation, your new vehicle-

specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio dealer. The installation

professionals employed by your dealer have the necessary tools and experience to disassemble and reassemble your vehicle

properly. Also, keep in mind that your warranty coverage extends to 2 years if your system is installed or approved by your

authorized JL Audio dealer. If you prefer to perform your own installation, please read this installation guide completely

before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox ® be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

S T E P 1

Remove the all contents from the rear seating area.

Lower the second row seats.

Remove the two-piece plastic storage bins from the rear

wall.

Continued on Next Page

S T E P 2

The rear wall of the passenger’s side storage bin needs to

be cut out. Follow carefully. The cut lines are STEPS 2 - 4

indicated by the white dash lines. Use a cutting wheel for the

best results.

This cut line follows the corner line crease of the storage bin.

S T E P 3

This cut line also follows the corner line crease.

SB-T-TACDC/10W1v3_INSTR_SKU#011238

INSTALLATION

D I F F I C U L T Y :

OUT

ESTIMATED TIME:

23 HOURS

Continued on Next Page

SB-T-TACDC/10W1v3_INSTR_SKU#011238

S T E P 7

The supplied wax square is to be placed onto the rear wall,

just to the right of the second mount as in the picture.

S T E P 6

The Stealthbox® is to be inserted from the back side of the

modified panel. If necessary, trim the panel to allow the

Stealthbox® to fit.

S T E P 5

Remove the ribs that are located on the back side of the

storage bin.

S T E P 4

The top cut line runs straight across. The line does not follow

the corner crease, as like the other cut lines. This top line is

1/2-inch in front of the corner crease.

Page 2 • JL Audio, Inc 2016

S T E P 9

Note: Before drilling, make sure that you are not

going to be drilling into any gas lines, brake lines,

transmission lines, electrical wiring, transfer case (4x4

vehicles) or anything else that might cause a reduc-

tion in your weekly pay. Always wear eye protection

when drilling!

With a drill and a 1/2-inch drill bit, drill through the

impression made in the wax square.

Remove the wax square.

S T E P 1 1

From under the vehicle, place the supplied fender washers, flat

washers, lock washers and then hex nut onto the protruding

socket cup set screw and secure. Adjust the amount of

exposed thread on each cup set screw if necessary.

Note: For added protection, it is recommended that

you apply a bead of silicone between the vehicle and

the fender washer. After the bolt assembly is tightly

secured, it is also recommended that vehicle under-

coating material is applied to the exposed assembly.

S T E P 1 0

Back out the socket cup set screw that was installed in STEP

8, to expose 1 1/4-inch of the threads.

Place the Stealthbox®

with the plastic panel back into the

mount area. Guide the socket cup set screw through the

drilled hole.

Run speaker wire from the amplifier’s location to the

Stealthbox® location and check for proper operation of

the woofer.

S T E P 8

Thread the supplied socket cup screw into the rear of the

Stealthbox®, leaving 1/4-inch of the threads exposed.

Place the Stealthbox® with the modified plastic panel into

the mounting location and press firmly onto the Stealthbox®.

Remove the Stealthbox® with the plastic panel carefully,

leaving the wax square in place. The socket cup set screw

will leave an impression onto the wax square.

(1)

(2)

SB-T-TACDC/10W1v3_INSTR_SKU#011238

C O N G R A T U L A T I O N S

You have completed the installation for this model!

Please refer to the Power Recommendation section for an

amplifier recommendation and basic set-up help.

S T E P 1 2

Secure the driver’s side plastic panel back onto the rear wall.

Page 3 • JL Audio, Inc 2016

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered

trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.

For more detailed information please visit us online at www.jlaudio.com.

(954) 443-1100

w w w . j l a u d i o . c o m

1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A

I N C L U D E D H A R D W A R E

(1) (1)3/8-inch Split Lock Washer 3/8-inch -16 x 2-1/4-inch Socket Cup Set Screw

(1) 3/8-inch Flat Washer (1) 3/8-inch -16 Hex Nut

(1) 3/8-inch x 2-inch Fender Washer

(1) 3-inch x 3-inch Wax Square

S P E C I F I C A T I O N S

Enclosure Type: Acoustic Suspension (sealed)

Driver Type: (2) 10W1v3-4

Nominal Impedance: 2 ohms

Continuous Power Handling: 600 Watts

P O W E R R E C O M M E N D A T I O N

JL Audio recommends using a high quality amplifier such as the JL Audio XD600/1v2. The diagram below shows

the recommended crossover, infrasonic filter and equalizer settings for the XD600/1v2 when being used to power

your Stealthbox®.

The JL Audio XD600/1v2 is a very versatile audio component. Please consult the owner’s manual for even more

detailed information about installing and tuning this amplifier.

M I D / H I G H F R E Q U E N C Y D R I V E R F I T M E N T

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location: 6-inch x 9-inch / Front Doors

Fits JL Audio Models: TR690-TXi & *C2690-TX

Rear Speaker Size / Location: 6.5-inch / Rear Doors

Fits JL Audio Models: TR650-CXi, TR650-CSi, C2650-X, C2650, *XR650-CXi, *C3650,

*C5-650x, *C5-650 & *ZR650-CSi

*Mounting / spacer plate is required.

Specyfikacje produktu

Marka:	JL Audio
Kategoria:	Niesklasyfikowane
Model:	Stealthbox SB-T-TACDC/10W1v3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JL Audio Stealthbox SB-T-TACDC/10W1v3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane JL Audio

JL Audio MediaMaster 55-HR Instrukcja

7 Października 2024

JL Audio MediaMaster 55 Instrukcja

7 Października 2024

JL Audio Stealthbox SB-J-JL4DPAS/10TW1-2 Instrukcja

4 Października 2024

JL Audio MBT-RX Instrukcja

3 Października 2024

JL Audio MediaMaster MM105-HR Instrukcja

2 Października 2024

JL Audio JLINK RX Instrukcja

30 Września 2024

JL Audio Stealthbox SB-POL-RZG3/10TW3 Instrukcja

29 Września 2024

JL Audio Stealthbox SBA-J-JK-FHB Instrukcja

27 Września 2024

JL Audio Stealthbox SB-GM-BURBCNSL/10W3v3 Instrukcja

27 Września 2024

JL Audio Stealthbox SB-F-SUPRDTY/10W1v3 Instrukcja

27 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024