Instrukcja obsługi JL Audio Stealthbox SB-D-MGACAB/10W6v3

JL Audio Niesklasyfikowane Stealthbox SB-D-MGACAB/10W6v3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JL Audio Stealthbox SB-D-MGACAB/10W6v3 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

INSTALLATION

D I F F I C U L T Y :

I N S T A L L A T I O N G U I D E

for the

SB-D-MGACAB/10W6v3

2006 - Up Dodge Ram Mega Cab Trucks

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized

JL Audio dealer. The installation professionals employed by your dealer have the necessary

tools and experience to disassemble and reassemble your vehicle properly. Also, keep

in mind that your warranty coverage extends to two years if your system is installed

or approved by your authorized JL Audio dealer. If you prefer to perform your own

installation, please read this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox® be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

S T E P 1

Remove all contents from the rear seating area and fold

down the rear seating.

Open the storage unit that is located between the rear seat

and the rear wall. In this storage unit there is three bolts.

Remove the passenger side bolt.

Continued on Next Page

S T E P 2

Remove the middle bolt.

S T E P 3

Remove the driver’s side bolt.

Remove the storage unit out of the vehicle.

SB-D-MGACAB/10W6v3_INSTR_SKU# 011217

OUT

S T E P 9

Place the Stealthbox® upside down on the folded rear seats.

Back out both socket cup set screws to expose 1-1/5".

With an 1/2" drill bit and drill. Drill through the floor at the

wax squares, using the impressions of the socket cup set

screw as a guide.

Once both holes have been drilled, remove both

wax sqaures.

S T E P 1 1

From under the vehicle, place the supplied fender washers, flat

washers, lock washers and then hex nuts onto each protruding

socket cup set screw and secure. Adjust the amount of

exposed thread on each cup set screw if necessary.

Note: For added protection, it is recommended that

you apply a bead of silicone between the vehicle

and the fender washer. After the bolt assembly is

tightly secured, it is also recommended that vehicle

under-coating material is applied to the exposed

assembly.

S T E P 1 0

Place the Stealthbox® into place. Carefully guiding the socket

cup set screws through the drilled holes.

Run speaker wire from the amplifier location to the enclosure

and attach to the terminal.

Check the woofers for proper operation.

Continued on Next Page

SB-D-MGACAB/10W6v3_INSTR_SKU# 011217

S T E P 7

Thread in the two supplied socket cup set screws to the

bottom of the Stealthbox®. Leaving about 1/4" exposed.

S T E P 6

The 31-3/4" measurement is starting from the middle of the

first wax square to the left, as seen in S T E P 5 & 6 .

Remove the paper backing from the second supplied wax

square. Apply this second wax square 31-3/4" to the left of

the first wax square.

S T E P 5

As in the picture, measure for the exact placement of the

wax square.

Remove the paper backing from one of the supplied wax

squares. Apply the wax square onto the flooring behind the

rear seating on the driver's side.

S T E P 4

Remove the driver’s and passenger’s side folding

floor extensions.

S T E P 8

Position the enclosure and press firmly down. This is to leave

an impression onto the wax squares.

Page 2 • JL Audio, Inc 2014

4-inches

9-1/4-inches

31-3/4-inches

SB-D-MGACAB/10W6v3_INSTR_SKU# 011217

C O N G R A T U L A T I O N S

You have completed the installation for this model!

Please refer to the Power Recommendation section for an

amplifier recommendation and basic set-up help.

S T E P 1 4

Use scissors to clean up the carpet’s edge.

Mount the folding floor extensions.

S T E P 1 3

The passenger’s side folding floor extension will only need to

be cut on the rear corner, driver’s side.

If the folding floor extensions are to be retained, they will

need to be permanently modified, follow STEPS 12-14.

If they are not to be retained,

C O N G R A T U L A T I O N S

You have completed the installation for this model!

S T E P 1 2

The driver's side folding floor extension will need to be cut

across the entire rear section. As in the picture, use the metal

framing as a cutting guide.

Page 3 • JL Audio, Inc 2014

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered

trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.

#6,294,959 #6,501,844 #6,496,590 #6,441,685 #5,687,247 #6,219,431 #6,625,292 #D472,891 #D480,709 Other U.S. & Foreign patents pending.

For more detailed information please visit us online at www.jlaudio.com.

(954) 443-1100

w w w . j l a u d i o . c o m

1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A

I N C L U D E D H A R D W A R E

(2) 3/8-inch - 16 x 2-1/2-inch Socket Cup Screw 3/8-inch Hex Nut(2)

(2) 3/8-inch x 2-inch Fender Washer

(2) 3/8-inch USS Flat Washer

(2) 3/8-inch Split Lock Washer

S P E C I F I C A T I O N S

Enclosure Type: Acoustic Suspension (sealed)

Driver Type: Two 10W6v3-D4

Nominal Impedance: 4 ohms mono

Continuous Power Handling: 1200 Watts

P O W E R R E C O M M E N D A T I O N

JL Audio recommends using a high quality amplifier such as the JL Audio HD750/1, HD1200/1& 1200/1V3

The diagram below shows the recommended crossover, infrasonic filter and equalizer settings for the 1200/1V3

when being used to power your Stealthbox ®.

The JL Audio 1200/1V3 is a very versatile audio component. Please consult the owner’s manual for even more

detailed information about installing and tuning this amplifier.

M I D / H I G H F R E Q U E N C Y D R I V E R F I T M E N T

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location: 6 x 9 / Front Doors

Fits JL Audio Models: TR690-TXi & C2690tx

Rear Speaker Size / Location: 5.25-inch / Rear Door

Fits JL Audio Models: TR525-CXi, C2525x & C3525

1-1/2-inches

3-inches

Specyfikacje produktu

Marka:	JL Audio
Kategoria:	Niesklasyfikowane
Model:	Stealthbox SB-D-MGACAB/10W6v3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JL Audio Stealthbox SB-D-MGACAB/10W6v3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane JL Audio

JL Audio MediaMaster 55-HR Instrukcja

7 Października 2024

JL Audio MediaMaster 55 Instrukcja

7 Października 2024

JL Audio Stealthbox SB-J-JL4DPAS/10TW1-2 Instrukcja

4 Października 2024

JL Audio MBT-RX Instrukcja

3 Października 2024

JL Audio MediaMaster MM105-HR Instrukcja

2 Października 2024

JL Audio JLINK RX Instrukcja

30 Września 2024

JL Audio Stealthbox SB-POL-RZG3/10TW3 Instrukcja

29 Września 2024

JL Audio Stealthbox SBA-J-JK-FHB Instrukcja

27 Września 2024

JL Audio Stealthbox SB-GM-BURBCNSL/10W3v3 Instrukcja

27 Września 2024

JL Audio Stealthbox SB-F-SUPRDTY/10W1v3 Instrukcja

27 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024