Instrukcja obsługi JL Audio Stealthbox SB-B-X5/10W1v3

JL Audio Niesklasyfikowane Stealthbox SB-B-X5/10W1v3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JL Audio Stealthbox SB-B-X5/10W1v3 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/3

INSTALLATI ON

D I F F I C U L T Y :

I N S T A L L A T I O N G U I D E

for the

SB-B-X5/10W1v3

SKU# 94280

2000 - 2006 BMW X5

Thank you for choosing a JL Audio Stealthbox ® for your automotive sound system. With proper installation, your new

vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized JL Audio dealer. The

installation professionals employed by your dealer have the necessary tools and experience to disassemble and

reassemble your vehicle properly. Also, keep in mind that your warranty coverage extends to 1 year if your system is

installed or approved by your authorized JL Audio dealer. If you prefer to perform your own installation, please read

this installation guide completely

before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox ® be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

S T E P 1

Remove the flooring and the passenger side storage/woofer

cover from the vehicle.

Continued on Next Page

S T E P 2

With a 10mm socket, remove the pair of nuts that are

pictured.

Remove this plastic flooring panel.

S T E P 3

If equipped with the factory woofer system.

Disconnect the factory woofer system.

With a 10mm socket, remove the pair of nuts that secure the

factory woofer enclosure’s footing to the floor.

SB-B-X5/10W1v3_INSTR_SKU#011221

OUT

Continued on Next Page

SB-B-X5/10W1v3_INSTR_SKU#011221

S T E P 7 ( O P T I O N A L )

If equipped with the factory woofer system.

You can use the factory footing instead of the supplied foot-

ing for the next step.

With a 5mm Allen key, remove the pair of bolts that secure

the plastic footing to the factory woofer enclosure.

S T E P 6

If equipped with the factory woofer system.

Grab the top of the factory woofer enclosure and pull out.

Guide the factory fuse/relay box, up and over the factory

woofer enclosure.

S T E P 5

If equipped with the factory woofer system.

With a 6mm Allen key, remove the bolt that secures the top

of the factory woofer enclosure.

S T E P 4

With a 7mm socket, remove the five bolts that secure the

factory fuse/relay box.

Page 2 • JL Audio, Inc 2016

S T E P 9

Place the bottom of the Stealthbox ® into the mounting area.

Guide the factory fuse/relay box up and over the top of the

Stealthbox®.

Secure the plastic mounting flange to the floor area using

the two factory 10mm nuts that were removed in STEP 3.

S T E P 1 1

Place a supplied lock washer and then flat washer onto the last

supplied 8mm x 30mm bolt. Secure the L-bracket to the top of

the Stealthbox®

S T E P 1 0

If equipped with the factory woofer system.

Secure the supplied L-bracket to the vehicle using the factory

bolt that was removed in STEP 5.

If not equipped with the factory woofer system, but

does have the threaded insert . Place a supplied flat

washers onto the supplied 8mm x 30mm bolt. Secure the

L-bracket to the vehicle with this bolt assembly.

If no threaded insert is found. Place a supplied flat

washer onto the supplied 8mmx30mm bolt. Place this bolt

through the L-bracket and hole. Place a supplied flat washer

and then lock washer and 8mm nut onto the bolt and

secure.

S T E P 8

If equipped with the factory woofer system.

Using the factory hardware, secure the factory footing to the

Stealthbox.

If not equipped with the factory woofer system.

Using a 5mm Allen key, secure the supplied plastic footing

to the Stealthbox® with the pair of supplied black flat socket

screws.

Attach desired length of speaker cable to the Stealthbox ®,

and double check the woofer for proper operation.

SB-B-X5/10W1v3_INSTR_SKU#011221

C O N G R A T U L A T I O N S

You have completed the installation for this model!

Please refer to the Power Recommendation section for an

amplifier recommendation and basic set-up help.

S T E P 1 4

With a knife, carefully slice off the five tabs that secure the

fabric panel to the backside of the storage/woofer cover.

After the fabric panel has been removed. Grind off the two

long ribs (A) and two short ribs (B).

S T E P 1 3

If you are using the factory plastic footing, use the factory

mounting nuts to secure the plastic footing to the floor.

If you are using the supplied plastic footing, use the supplied

pair of speed nuts to secure the plastic footing to the floor.

Replace the plastic panel that was removed and use the

10mm nuts that were removed in STEP 2.

S T E P 1 2

Using the factory bolts, secure the factory fuse/relay box to

the vehicle.

Page 3 • JL Audio, Inc 2016

All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered

trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.

For more detailed information please visit us online at www.jlaudio.com.

(954) 443-1100

w w w . j l a u d i o . c o m

1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A

I N C L U D E D H A R D W A R E

(2) 8mm Split Lock Washer (1) Plastic Foot Mount

(3) 8mm Flat Washer (2) Speed Nuts

(1) 8mm Hex Nut (2) 8mm x 30mm Hex Cap Screw

(1) L-Bracket (2) 8mm -20 Black Flat Socket Caps

S P E C I F I C A T I O N S

Enclosure Type: Acoustic Suspension (sealed)

Driver Type: 10W1v3-2

Nominal Impedance: 2 ohms

Continuous Power Handling: 300 Watts

P O W E R R E C O M M E N D A T I O N

JL Audio recommends using a high quality amplifier such as the JL Audio XD300/1v2.

The diagram below shows the recommended crossover settings for the XD300/1v2 when being used to power

your Stealthbox®.

The JL Audio XD300/1v2 is a very versatile audio component. Please consult the owner’s manual for even more

detailed information about installing and tuning this amplifier.

M I D / H I G H F R E Q U E N C Y D R I V E R F I T M E N T

A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.

Front Speaker Size / Location: 6.5-inch / Front Doors

Fits JL Audio Models: TR-650-CSi, TR-650-CXi, C2-650, C2-650X, C3-650, C5-650, C5-650X, & ZR650-CSi

Rear Speaker Size / Location: 6.5-inch / Rear Doors

Fits JL Audio Models: TR650-CXi, C2-650, C2-650x, C3-650, C5-650, & C5-650x

Specyfikacje produktu

Marka:	JL Audio
Kategoria:	Niesklasyfikowane
Model:	Stealthbox SB-B-X5/10W1v3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JL Audio Stealthbox SB-B-X5/10W1v3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane JL Audio

JL Audio MediaMaster 55-HR Instrukcja

7 Października 2024

JL Audio MediaMaster 55 Instrukcja

7 Października 2024

JL Audio Stealthbox SB-J-JL4DPAS/10TW1-2 Instrukcja

4 Października 2024

JL Audio MBT-RX Instrukcja

3 Października 2024

JL Audio MediaMaster MM105-HR Instrukcja

2 Października 2024

JL Audio JLINK RX Instrukcja

30 Września 2024

JL Audio Stealthbox SB-POL-RZG3/10TW3 Instrukcja

29 Września 2024

JL Audio Stealthbox SBA-J-JK-FHB Instrukcja

27 Września 2024

JL Audio Stealthbox SB-GM-BURBCNSL/10W3v3 Instrukcja

27 Września 2024

JL Audio Stealthbox SB-F-SUPRDTY/10W1v3 Instrukcja

27 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024