Instrukcja obsługi JETI JEX-MB


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JETI JEX-MB (7 stron) w kategorii Zabawki sterowane radiem. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/7
U MSER ANUAL
MBAR EX
By JETI model s.r.o. . 11. 14 14 20
User Manual MBar EX:
-2-
C ONTENTS
1. INTRODUCTION ...................................................................................................................................... 3
2. MAIN FEATURES .................................................................................................................................... 3
3. PLACEMENT OF MBAR EX SENSOR ................................................................................................. 3
4. CONNECTING THE MBAR EX SENSOR ............................................................................................ 4
5. SETTING VIA JETIB ......................................................................................................................... 5OX
5.1 T : .............................................................................................................................. 5 HE MBAR EX SENSOR MENU
6. SETUP VIA DC/DS TRANSMITTERS .................................................................................................. 6
7. WARRANTY .............................................................................................................................................. 7
8. MBAR EX MENU DISPLAYED ON THE JETIBOX LCD: ................................................................ 7
User Manual MBar EX:
-3-
1. Introduction
MBar EX is a sensor that measures high pressures of non-corrosive and unionized gases and liquids. The
sensor records the maximum and minimum measured values of pressure and temperature. Also, it is possible to
set alarm for a high pressure measurement pressure drop. The information from the sensor is transmitted an or a
to the user via Duplex system. The EX can be used for measuring pressure in containers with EX MBar
compressed air (retractable landing gear systems) or for controlling the oil pressure in hydraulic systems.
The Duplex system takes advantage of the 2.4GHz band for communication. This system not only EX
transmits control data to the model but also sends data from the model back to the transmitter. The telemetry
data collected during operation is shown as actual, measured values in real time. The values are shown either on
the LCD screen of a connected JETIBOX or on the display of JETI model DC/DS transmitters.
2. Main features
- Measurement of pressure and temperature.
- Possible sound alarm signaling of excessive pressure or pressure drop using a JETI Tx module (EU only) or
JETIBOX profi.
- Can be used as an Expander and to connect other sensors.
- Can detect logical voltage levels on up to two inputs (e.g. detection of securing the chassis).
- The device is compatible with EX Bus protocol, i.e. it is possible to be configured comfortably via a special
menu in DC/DS JETI model transmitters.
- Firmware updates.
Technical data
MBar EX
Dimensions of the extension
Dimensions
30x23x13mm
Weight
7g
M suring accuracy of absolute ea
pressure
±2%
Resolution of measured pressure
0,1kPa
Measurement range
0÷1000kPa (150psi, 10bar)
Operating temperature
- 10÷85°C
Recommended supply voltage
3.5 ÷ 8.4V
Maximum supply voltage
16V
Consumption
15mA
Diameter of the extension
2mm
3. Placement of MBar EX sensor
The sensor should be mounted in the model to a hard surface to prevent accidental pulling out of cables or
pressure tubing. Properly protect the sensor against the transmission of vibrations, e.g. using double-sided
adhesive tape. Use pressure tubing properly sized for the required pressure.
Attention! The sensor itself is not mechanically suited for frequent pulling out of the tubing. It is strongly
recommended to have the tubing permanently connected to the sensor. If necessary, disconnect the tubing
further away from the sensor. Failure to do so may damage the sensor.


Specyfikacje produktu

Marka: JETI
Kategoria: Zabawki sterowane radiem
Model: JEX-MB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JETI JEX-MB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Zabawki sterowane radiem JETI

JETI

JETI TD1609S Instrukcja

23 Września 2024
JETI

JETI JDEX-RR7 Instrukcja

23 Września 2024
JETI

JETI JEX-MF2G-800 Instrukcja

22 Września 2024
JETI

JETI JM-090-L Instrukcja

22 Września 2024
JETI

JETI TD0905L Instrukcja

22 Września 2024
JETI

JETI AddCAP 1640 Instrukcja

22 Września 2024

Instrukcje Zabawki sterowane radiem

Najnowsze instrukcje dla Zabawki sterowane radiem