Instrukcja obsługi Jensen XA 4100

Jensen Radia samochodowe XA 4100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Jensen XA 4100 (12 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
How to Install and Operate
the XA4100 Amplifier
®
Contents
Technical Assistance
For technical assistance with the operation or installation
of the XA4100, call 1-800-323-0221.
Welcome!
What you're holding in your hands is no ordinary
owner's manual. We've tried to make the instructions
in this book clear and easy to follow.
For your Jensen amplifier to work right, it must be
installed correctly. This manual will show you how to
install your new amplifier like a pro. It's a good idea to
read all of these instructions before you begin the
installation. Most installations are straightforward and
can be handled by a do-it-yourselfer with the right
tools, patience, and the ability to follow instructions.
But, do-it-yourself installation isn't for everyone. If you
still don't feel confident after reading this book,
consider turning the installation job over to someone
better suited to it.
Warranty Service
If your Jensen amplifier should ever require service,
you will need to have the original dated receipt. If you
ever need to return the unit for any reason, always
include the receipt with the product.
Features ........................................ 2
Installation ................................... 2
Before You Begin
Installation .....................................2
Amplifier Location ..........................2
Disconnect Battery ........................2
• Amplifier Installation Kit ............. 2
Supplies and Tools
Needed ..........................................3
Routing Wires ................................3
• Bigger is Better .......................... 3
Wiring ............................................. 4
Power and Outputs........................4
Power Terminal (BATT +12V) ........ 4
Ground Terminal (GND)................. 4
Remote Terminal (RMT +12V)....... 4
Fuses .............................................4
Inputs and Controls .......................5
Input Wiring....................................5
Pass Output ...................................5
Power Light.................................... 5
Protect Light ..................................5
Input Level Control ........................6
Bass Boost.....................................6
Crossover ......................................6
Speaker Wiring .............................. 7
Testing .......................................... 9
Reconnect Battery .........................9
Test Power Wiring.......................... 9
Test Speaker Connections ............ 9
• Dealing with Alternator
Noise.......................................... 9
• Installing in Trunk ..................... 10
• Crimp Connections ..................10
• Securing Wires ........................ 10
• Speaker and
Power Wires ............................ 10
Troubleshooting ....................... 11
Specifications
and Warranty ............................. 12
POWER
PROTECT
HIGH INPUT
HIGH INPUT
®
LEVEL
HPF
LPF
MIN MA X
MIN MA X
50 250
50 250
50 250
50 250
CH
3/4
CH
1/2
ON OFF
BASS
-BOOST
HPF L PF
FULL
X-OVER
ON OFF
BASS
-BOOST
HP
FLPF
FULL
X-OVER
2CH4C H
3CH
MODE
CH 1/2
CH 3/4
5313Eamp.p65 4/10/99, 7:05 PM1
2
®
XA4100
Amplifier Location
The XA4100 amplifier’s compact design
allows greater flexibility in mounting. It can be
mounted under a seat or in the trunk.
When selecting a location, remember that
amplifiers generate heat. Select a location
where air can circulate around the amplifier.
Do not cover the with carpets orXA4100
enclose it behind interior trim panels. Do not
mount the amplifier in an inverted or upside
down configuration. Every installation will be
a bit different based upon vehicle design.
Check all locations and placements carefully
before making any cuts or connections.
Important
Allow air circulation around the amplifier.
Installation
Disconnect Battery
Before you begin, always
disconnect the battery
negative terminal.
+
–
Professional Tip
Amplifier Installation Kit
Your installation job will be much easier if you
purchase an amplifier installation kit. These
kits often include low-level RCA cables, extra
large power and ground wires, a fuse or circuit
breaker and connector for the battery.
Before You Begin Installation
Before you begin, you will need tools, supplies
and adapters. It is best to make sure you have
everything you need before you start. There is a
list of supplies and tools on the next page.
Features
• Bridgeable design to direct full power to two
speakers
Audio Amplifiers
Amplification offers two advantages:
• The XA4100 amplifier can make the sound
of your receiver fuller and richer, even at low
volume levels.
• Many automotive receivers provide four to
10 watts at maximum power. At 50 watts
RMS per channel (150 watts bridged), the
XA4100 can be played substantially louder,
permitting the use of more powerful
speakers.
The Jensen XA4100 power amplifier is a two-
channel 400-watt total system power automotive
amplifier. The XA4100 includes:
• RCA inputs
• High level inputs
• Continuously variable low pass or high
pass crossover
• Bass boost feature
• Remote turn on/off
• Electronic protection circuitry to protect the
amplifier from short circuit, DC offset and
thermal overload
• Unique, super-efficient heat sink design
•4 x 50 watts RMS per channel (4 x 100
watts peak)
• 2 x 150 watts RMS bridged into a 4 ohm
load
Important
If wiring connections are made wrong, the unit
will not operate properly and it could be
damaged. Follow the installation instructions
carefully, or have the installation handled by
an experienced technician.
5313Eamp.p65 4/10/99, 7:05 PM2
3
®
XA4100
Supplies and Tools Needed
Supplies:
• Speaker wire (12 gauge for subwoofers, 16-18
gauge for other speakers)
• Sheet metal type screws for mounting amplifier
• Electrical tape
• Solderless crimp connectors
• 1/2" thick plywood or particle board to mount
amplifier on
Tools:
• Flat and Phillips screwdrivers
• Wire cutters
• Wire strippers
• Cordless or standard electric drill and drill bit set
• Crimping tool (if using solderless crimp
connectors)
• 12-volt test light or digital multimeter
• Wire brush or scraper (to remove paint for a
good ground connection to vehicle)
• Soldering iron and rosin core solder (if you're
going to solder your connections)
Amplifier Installation Kit:
You will need an amplifier installation kit to install
your amp properly because it contains all the
wire and connectors that you will need to hook
up your new amp right the first time. If you want
to purchase these items separately you will need
the following:
• 20-25 feet of 8 gauge wire
• 50 amp fuse or circuit breaker (to be hooked up
at the battery)
• 20 feet of 18 gauge wire for the remote turn-on/
power antenna lead
• RCA cable (for signal input from radio)
– 20 feet for trunk installation
– 12 feet for under-seat installation
• Two 8 gauge ring terminals (one for the battery
connection and the other for the ground connec-
tion at the amp). You may need two additional
ring terminals if you are using a circuit breaker at
the battery.
• Two 8 gauge barrel connectors (you may need
these depending on what type of fuse holder you
have)
• Two 8 gauge spade terminals (to hook up power
at the amp)
• Eight 12 gauge spade terminals for subwoofers
or 16-18 gauge spade terminals for other
speaker connections to amp
• One 18 gauge spade terminal for remote turn-on/
power antenna lead
Routing Wires
Professional Tip
Bigger is better
Stereo installation dealers sell extra thick
power and speaker wires to ensure best
sound. Look for 8 gauge power wire, espe-
cially if you have several amplifiers.
Speakers
Amplifier
Battery
Connector
Fuse or
Circuit
Breaker
Battery
Power Wire
(8 gauge
wire or
larger)
Power Antenna
Turn-on Wire
(18 gauge wire)
RCA Cables
Ground Screw
Drill 1/8" hole in
chassis sheet metal
Use the same ground if
using multiple amplifiers
Grommet
To prevent
damage to
power wire
Receiver
5313Eamp.p65 4/10/99, 7:05 PM3

Specyfikacje produktu

Marka: Jensen
Kategoria: Radia samochodowe
Model: XA 4100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Jensen XA 4100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Radia samochodowe Jensen

Jensen

Jensen JHD62B Instrukcja

29 Września 2024
Jensen

Jensen Heavy Duty JHD1130 Instrukcja

20 Września 2024
Jensen

Jensen Power 760.4 Instrukcja

18 Września 2024
Jensen

Jensen CAR910X Instrukcja

4 Września 2024
Jensen

Jensen VM9224R Instrukcja

4 Września 2024
Jensen

Jensen VM9214R Instrukcja

2 Września 2024
Jensen

Jensen MPR2110 Instrukcja

28 Sierpnia 2024
Jensen

Jensen Heavy Duty JHD1630 Instrukcja

17 Sierpnia 2024
Jensen

Jensen XA 4100 Instrukcja

15 Sierpnia 2024
Jensen

Jensen CDX3119 Instrukcja

4 Lipca 2024

Instrukcje Radia samochodowe

Najnowsze instrukcje dla Radia samochodowe

JVC

JVC KD-R90BT Instrukcja

15 Października 2024
Kenwood

Kenwood KMM-X705 Instrukcja

15 Października 2024
Alpine

Alpine CDM-7870R Instrukcja

14 Października 2024
Hyundai

Hyundai H-CMD2009 Instrukcja

14 Października 2024
Dual

Dual XC4100 Instrukcja

13 Października 2024
Audiovox

Audiovox VXE 3010 Instrukcja

13 Października 2024
MB Quart

MB Quart PAB 5400 Instrukcja

13 Października 2024
Hyundai

Hyundai H-CDM8023 Instrukcja

13 Października 2024
Caliber

Caliber RCD110B Instrukcja

13 Października 2024
JVC

JVC KD-X30 Instrukcja

13 Października 2024