Instrukcja obsługi JBL S50


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JBL S50 (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
thank you for choosing JBL. For over 50 years, JBL
has been involved in every aspect of musical and film recording
and reproduction, from live performances to monitoring the
recordings you play in your home, car or office.
We’re confident that the JBL loudspeakers you have
chosen will provide every note of enjoyment that you expected
and that when you think about purchasing additional audio
equipment for your home, car or office, you will once again
choose JBL.
Please take a moment to complete the enclosed profile card.
It enables us to keep you posted on our latest advancements,
and helps us to better understand our customers and to build
products that meet their needs and expectations.
JBL Consumer Products
S50
simple
setup guide
one. Speaker Placement
Proper placement of the
speakers is an important
step in obtaining the
most realistic soundstage
possible. These recom-
mendations are for the
optimum placement of the
loudspeakers. Use these
placement recommenda-
tions as a guide. Slight
variations will not
diminish your listening
pleasure.
The S50 loudspeakers are
video shielded and can
be safely placed near a
television.
As Front Speakers
As Surround Speakers
56 ft.
S50
40–60
o o
two. Speaker Connections
Connection Tips
+ +
+ +
Speaker Outputs
RIGHT LEFT
RIGHT LEFT
Speakers and electronics terminals have corresponding
(+) and (–) terminals. It is important to connect both
speakers identically: (+) on the speaker to (+) on the
amplifier and (–) on the speaker to (–) on the amplifier.
Wiring “out of phase” results in thin sound, weak bass
and a poor stereo image.
Troubleshooting
If there is no sound from
any of the speakers,
check the following:
Receiver/amplifier is on
and a source is playing.
Review proper operation
of your receiver/amplifier.
If there is no sound
coming from one
speaker, check the
following:
Check the “Balance”
control on your receiver/
amplifier.
Check all wires and
connections between
receiver/amplifier and
speakers.
Make sure all wires are
connected. Make sure none
of the speaker wires are
frayed, cut or punctured.
If the system plays at
low volumes but shuts
off as volume is
increased, check the
following:
Check all wires and con-
nections between receiver/
amplifier and speakers.
Make sure all wires are
connected. Make sure none
of the speaker wires are
frayed, cut or punctured.
If more than one pair of
main speakers is being
used, check the minimum
impedance requirements of
your receiver/amplifier.
If there is low bass out-
put, check the following:
Make sure the polarities
(+ and ) of the left and
right “Speaker Inputs” are
connected properly.


Specyfikacje produktu

Marka: JBL
Kategoria: głośnik
Model: S50

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JBL S50, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik JBL

JBL

JBL S50 Instrukcja

27 Grudnia 2024
JBL

JBL ES100 Instrukcja

27 Grudnia 2024
JBL

JBL 400GTi Instrukcja

25 Grudnia 2024
JBL

JBL ARC Center Instrukcja

25 Grudnia 2024
JBL

JBL AS6 Instrukcja

25 Grudnia 2024
JBL

JBL Array 880 Instrukcja

25 Grudnia 2024
JBL

JBL AS65C Instrukcja

25 Grudnia 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik