Instrukcja obsługi JBL PD5322

JBL głośnik PD5322

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JBL PD5322 (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

PD5322/95

Specifications:

Frequency Range1(-10 dB): 41 Hz to 17 kHz

Frequency Response1(±3 dB): 49 Hz to 15 kHz

Coverage Pattern: 90° x 50°

Directivity Factor (Q): 10.5

Directivity Index (DI): 10.2 dB

Crossover Modes: Tri-amp/Bi-amp (passive mid-high) switchable

Passive Crossover2: 6th order (36 dB/oct) Linkwitz-Riley HP & LP, 1.5 kHz

Transducer Power Ratings LF: 1600 W (6400 W peak)

, 2 hrs. 1200 W (4800 W peak), 100 hrs

(AES)3: MF: 350 W (1400 W peak), 100 hrs

HF: 75 W (300 W peak), 2 hrs

Long-Term System Power Bi-amplified Passive Mode: LF: 1200 W (4800 W peak)

Rating (IEC)4:Bi-amplified Passive Mode: M/HF: 300 W (1200 W peak), 100 hrs

Maximum SPL5: Tri-amp mode: LF: 128 dB-SPL cont avg (134 dB peak)

MF: 134 dB-SPL cont avg (140 dB peak)

HF: 133 dB-SPL cont avg (139 dB peak)

Passive mode: 134 dB-SPL cont avg (140 dB peak)

System Sensitivity

6(1W @ 1m): Passive Mode: 109 dB-SPL (mid/high section only)

Transducers:

Low Frequency Driver: 2 x 2206H 300 mm (12 in) driver with 100 mm (4 in) voice coil

Nominal Impedance: 4 ohms (2 x 8 ohms, internally wired in parallel)

Sensitivity

6(1W, 1m): 96 dB-SPL

Mid Frequency Driver:

CMCD-82H cone midrange compression driver with intergral 200 mm (8 in)

Differential Drive®dual 75 mm (3 in) voice coil driver

Nominal Impedance: 8 ohms

Sensitivity

6(1W @ 1m): 109 dB-SPL

High Frequency Driver:

2431H, 38 mm (1.5 in) exit compression driver with 75 mm (3 in) voice coil

Nominal Impedance: 8 ohms

Sensitivity

6(1W @ 1m): 114 dB-SPL

Waveguides: MF: PT-N95MF 600 x 600 mm (24 x 24 in)

HF: PT-H95HF 300 x 300 mm (12 x 12 in)

Physical:

Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade

11-ply Finnish birch plywood.

Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware

(eyebolts NOT included, see optional accessories).

Finish: Black DuraFlex™ finish. White (-WH) available upon request.

Optional Weather Resistant for outdoor placement where the loudspeaker will be sheltered WRC

Versions: from direct exposure to the elements. WRX for direct exposure or

extreme environments, such as tropical or beach, or in areas with salt air,

extreme high humidity or rapid changes in temperature. See WRC/WRX

configuration sheet for details.

Grille: Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam

backing (grille cloth backing on white units)

Input Connectors: Neutrik Speakon

®NL8, plus CE-compliant covered barrier strip terminals.

Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width

9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-

through.

Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC

or WRX.

Dimensions 991 x 673 x 706 mm

(H x W x D in vertical orientation): (39.0 x 26.5 x 27.8 in)

Net Weight: 77 kg (170 lb)

Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.

1. In bi-amp mode, with recommended active tuning.

2Resultant engineered acoustical response of crossover network and components.

3AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES

2 hr rating plug long-term 100 hr rating are specified for low-frequency transducers.

4IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.

5Calculated based on power rating and sensitivity, exclusive of power compression.

6Anechoic sensitivity in free field, no additional sensitivity gains from boundary loading.

High Output Three-Way

Full-Range Loudspeaker

with 2 x 12" LF

Key Features:



Two high power 300 mm (12 in)

transducers in a compact slot-loaded

configuration for low frequency extension

to 40 Hz.



High power CMCD™ Cone Midrange

Compression Driver provides high sensi-

tivity and high continuous SPL capability

along with low distortion, extended band-

width and improved phase coherence.



Large format neodymium HF driver

provides clear intelligible high frequency

projection.



Large PT™ Progressive Transition™ wave-

guides provide consistent 90° x 50° pat-

tern control, low distortion at high SPL

levels and smooth frequency response.



Rotatable mid and high frequency wave-

guides allow either horizontal or vertical

cabinet orientation.



Sophisticated, steep-slope passive mid-

high crossover network with switchable

tri-amp/bi-amp crossover modes.

Applications:



Performing arts facilities/Live theaters



Auditoriums/Houses of worship



Dance clubs/Sports facilities

PD5322/95 is a Precision directivity™

90° by 50° full range, three-way loudspeaker

designed for use in arrays or singly in

demanding music or speech system applica-

tions requiring high output capabiliy with

excellent pattern control and low frequency

extension to 40 Hz.

The low frequency section, two 2206H

300 mm (12 in) VGC™ Vented Gap Cooled

low frequency transducers, offer high power

handling and low power compression for

high continuous SPL capability. A newly

designed LF loading plate provides the high-

est possible sensitivity, low frequency output

and system reliability.

The mid and high frequency sections are

horn-loaded for maximum sensitivity and

pattern control. The CMCD-82H cone

midrange compression driver consists of a

driver/phasing plug assembly providing high

output with low distortion. The design’s

extended response coupled with a small 100

mm (4 in) exit diameter allow for smoother

transition to the high frequency driver in the

magnitude and polar pattern domains. The

integral 200 mm (8 inch) cone driver fea-

tures a high power Differential Drive

dual,

voice coil design. The 2431H large format

high frequency compression driver utilizes a

neodymium magnet and aluminum

diaphragm to deliver clear and intelligible

high frequency projection, extended fre-

quency response, and low distortion at even

the highest drive levels.

JBL Professional

8500 Balboa Boulevard, P.O. Box 2200

Northridge, California 91329 U.S.A.

A Harman International Company

SS PD5322/95

CRP 5M

10/04

 PD5322/95 High Output Three-Way Full-Range Loudspeaker

100 1000 10000

100

Vertical Beamwidth

Horizontal Beamwidth

Frequency (Hz)

Beamwidth (-6dB Coverage)

360

20 20K

Beamwidth (Degrees)

706 (27.8)

300 (11.8)

15˚

673 (26.5)

991 (39.0)

Top

Front Side Back

Measurements obtained in tri-amplified crossover mode.

Dimensions

Dimensions in mm (in)

Beamwidth

JBL continually engages in research related to product improvement. Some materials,

production methods and design refinements are introduced into existing products

without notice as a routine expression of that philosophy. For this reason, any cur-

rent JBL product may differ in some respect from its published description, but will

always equal or exceed the original design specifications unless otherwise stated.

Large PT™ Progressive Transition waveguides achieve an

optimum balance of extremely well controlled coverage

with low distortion, smooth frequency response, and natu-

ral sound character. The mid and high frequency horns

are rotatable for cabinet positioning in either horizontal or

vertical orientation. High-slope crossovers minimize band

overlap and a well-controlled off-axis response enhances

arrayability.

The loudspeaker can be operated in either bi-amplified

(passive mid/high) or in tri-amplified mode. In either

case, digital signal processing is required in order to

achieve specified performance. Input connectors include

both Speakon

and CE-approved covered barrier strip

input connectors for hookup versatility. The cabinet is fit-

ted with twenty M10 threaded suspension points, support-

ing a wide variety of installation approaches.

Specyfikacje produktu

Marka:	JBL
Kategoria:	głośnik
Model:	PD5322

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JBL PD5322, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik JBL

JBL B-6ICDT Instrukcja

11 Stycznia 2025

JBL B-8IC Instrukcja

11 Stycznia 2025

JBL 4349 Instrukcja

11 Stycznia 2025

JBL Tower X Marine MT10HLW Instrukcja

5 Stycznia 2025

JBL Control CM42AW Instrukcja

31 Grudnia 2025

JBL Performance P36AW Instrukcja

31 Grudnia 2025

JBL Balboa 30 Instrukcja

31 Grudnia 2025

JBL 250Ti Instrukcja

31 Grudnia 2025

JBL 800 Instrukcja

31 Grudnia 2025

JBL 900 Instrukcja

31 Grudnia 2025

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025

ION Insta Sound Instrukcja

15 Stycznia 2025

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025

Yamaha WX-010 Instrukcja

15 Stycznia 2025

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025