Instrukcja obsługi JBL PD5212

JBL głośnik PD5212

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JBL PD5212 (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
PD5212/64
Specifications:
Frequency Range1(-10 dB): 80 Hz to 18 kHz
Frequency Response1(±3 dB): 90 Hz to 16 kHz
Coverage Pattern: 60° x 40°
Directivity Factor (Q): 22.4
Directivity Index (DI): 13.5 dB
Crossover Modes: Bi-amp/Passive switchable
Passive Crossover2: 6th order (36 dB/oct) Linkwitz-Riley HP & LP, 850 Hz
Transducer Power Ratings
LF: 400 W (1600 W peak), 2 hrs. 300 W (1200 W peak), 100 hrs
(AES)3: HF: 75 W (300 W peak), 2 hrs
Long-Term System Power Passive Mode: 300 W (1200 W peak), 100 hrs.
Rating (IEC)4:
Maximum SPL5: Bi-amp mode: LF: 135 dB-SPL cont avg (141 dB peak)
HF: 135 dB-SPL cont avg (141 dB peak)
Passive mode: 132 dB-SPL cont avg (138 dB peak)
System Sensitivity (1W @ 1m): Passive Mode: 107 dB-SPL
Transducers:
Low Frequency Driver: M222-8A 300 mm (12 in) driver with 75 mm (3 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity6(1W, 1m within 109 dB-SPL
operational band):
High Frequency Driver: 2451H-1, 38 mm (1.5 in) exit compression driver with 100 mm (4 in)
voice coil
Nominal Impedance: 8 ohms
Sensitivity6(1W @ 1m) 116 dB-SPL
W aveguides: LF: PT-N64MF 600 x 600 mm (24 x 24 in)
HF: PT-H64HF 300 x 300 mm (12 x 12 in)
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade
11-ply Finnish birch plywood.
Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hard-
ware (eyebolts NOT included, see optional accessories).
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant WRC for outdoor placement where the loudspeaker will be sheltered
Versions: from direct exposure to the elements. WRX for direct exposure or
extreme environments, such as tropical or beach, or in areas with salt
air, extreme high humidity or rapid changes in temperature. See
WRC/WRX configuration sheet for details.
Grille: Powder coated 14 gauge perforated steel, acoustically transparent foam
backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon
®NL4, plus CE-compliant covered barrier strip termi-
nals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max
width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip
for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use
WRC or WRX.
Dimensions 991 x 673 x 706 mm
(H x W x D in vertical orientation): (39.0 x 26.5 x 27.8 in)
Net Weight: 69.0 kg (152 lb)
Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.
1. In bi-amp mode, with required active tuning.
2Resultant engineered acoustical response of crossover network and components.
3AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES 2
hr rating plug long-term 100 hr rating are specified for low-frequency transducers.
4IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
5Calculated based on power rating and sensitivity, exclusive of power compression.
6Anechoic sensitivity in free field, no additional sensitivity gains from boundary loading.
JBL continually engages in research related to product improvement. Some materials, production methods and design
refinements are introduced into existing products without notice as a routine expression of that philosophy. For this rea-
son, any current JBL product may differ in some respect from its published description, but will always equal or exceed
the original design specifications unless otherwise stated.
High Output Two-Way
Full-Range Loudspeaker
with 1 x 12" LF
Key Features:
300 mm (12 in) horn-loaded LF and large
format HF driver – high sensitivity design
with high continuous SPL capability.
Large PT™ Progressive Transition™ wave-
guides provide broad band 60° x 40° pattern
control, low distortion at high SPL levels and
smooth frequency response.
Rotatable low and high frequency wave-
guides allow either horizontal or vertical cab-
inet orientation.
Sophisticated, steep-slope passive crossover
network with switchable bi-amp/passive
crossover modes.
Applications:
Performing arts facilities
Live theaters
Auditoriums
Houses of worship
Dance clubs
Sports facilities
PD5212/64 is a Precision Directivity™
60° by 40° loudspeaker designed for applica-
tions requiring high output capability with
excellent pattern control. PD5212/64 can be uti-
lized alone in music or speech systems where
frequency extension to 80 Hz is adequate or
combined with subwoofers to create extended
bandwidth full-range systems.
The M222-8A 300 mm (12 in) low frequency
transducer features high sensitivity and low
power compression for high continuous SPL
capability. It is horn-loaded for additional sensi-
tivity and improved pattern control. A newly
designed low frequency phasing plug extends
frequency response, providing smoother transi-
tion to the high frequency driver. The 2451H-1
large format high frequency compression driver
utilizes a neodymium magnet and pure titanium
diaphragm to deliver clear and intelligible high
frequency projection, extended frequency
response, and low distortion at even the highest
drive levels.
Large PT Progressive Transition waveguides
achieve an optimum balance of extremely well
controlled coverage with low distortion, smooth
frequency response, and natural sound charac-
ter. The low and high frequency horns are rotat-
able for cabinet positioning in either horizontal
or vertical orientation. High-slope crossovers
minimize band overlap and a well-controlled
off-axis response enhances arrayability.
The loudspeaker can be operated in either bi-
amplified or in full passive mode. In either case,
digital signal processing is required in order to
achieve specified performance. Input connectors
include both Speakon® and CE-compliant cov-
ered barrier strip for hookup versatility. The
cabinet is fitted with twenty M10 threaded sus-
pension points, supporting a wide variety of
installation approaches.
PD5212/64 is part of JBL’s broad lineup of
installed sound loudspeakers, complementing
the larger PD700 mid-high cabinets with a more
compact size and greater low frequency exten-
sion, and supplementing the smaller AE Series
cabinets with higher SPL capability and larger
horns for pattern control to a lower frequency.
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200
Northridge, California 91329 U.S.A.
© Copyright 2003 JBL Professional
A Harman International Company
SS PD5212/64
CRP 5M
10/04
PD5212/64 High Output Two-Way Full-Range Loudspeaker
100 1000 10000
10
100
Vertical Beamwidth
Frequency (Hz)
360
20 20K
Beamwidth (Degrees)
Horizontal Beamwidth
673 (26.5)
991 (39.0)
Front Side Back
706 (27.8)
300 (11.8)
15˚
Top
Measurements obtained in bi-amplified crossover mode.
Dimensions
Beamwidth
Dimensions in mm (in)

Specyfikacje produktu

Marka: JBL
Kategoria: głośnik
Model: PD5212

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JBL PD5212, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik JBL

JBL

JBL B-6ICDT Instrukcja

11 Stycznia 2025
JBL

JBL B-8IC Instrukcja

11 Stycznia 2025
JBL

JBL 4349 Instrukcja

11 Stycznia 2025
JBL

JBL Tower X Marine MT10HLW Instrukcja

5 Stycznia 2025
JBL

JBL Control CM42AW Instrukcja

31 Grudnia 2025
JBL

JBL Performance P36AW Instrukcja

31 Grudnia 2025
JBL

JBL Balboa 30 Instrukcja

31 Grudnia 2025
JBL

JBL 250Ti Instrukcja

31 Grudnia 2025
JBL

JBL 800 Instrukcja

31 Grudnia 2025
JBL

JBL 900 Instrukcja

31 Grudnia 2025

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025