Instrukcja obsługi JBL L100 Classic

JBL głośnik L100 Classic

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JBL L100 Classic (6 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
OWNER’S MANUAL
L100 Classic
Iconic 3-Way Bookshelf Loudspeaker
2
INTRODUCTION
Thank you for purchasing the JBL® L100 Classic 3-Way Loudspeaker
For more than 70 years, JBL has been providing audio equipment for concert halls, recording studios and
movie theaters around the world and has become the trusted choice of leading recording artists and sound
engineers. The legendary JBL 4310 professional studio monitor helped produce many of the most popular
albums of the 1960s and ‘70s. The 4310 was the inspiration for the L100 home audio loudspeaker introduced
in 1970, which became JBL’s all-time best selling speaker. The L100 Classic is a modern interpretation of the
original L100.
The new L100 Classic honors this storied legacy with its iconic 12-inch (300mm) 3-way configuration, but with
all-new drivers, crossover network, enclosure, and features to bring the design up to the highest 21st-century
performance standards. Utilizing a compact monitor-type footprint, the L100 Classic features advanced JBL
transducers including the JW300PW-8 Pure Pulp cone woofer, the 105H-1 Polymer-coated Pure Pulp cone
midrange, and the JT025TI1-4 Titanium tweeter.
The L100 Classic retains all of the performance attributes that endeared the original L100 to listeners in the
‘70’s and ‘80s, such as exceptional dynamic range and contrast, clean and effortless high output, and precise
high impact bass. The updated L100 Classic adds even greater detail resolution across the full bandwidth,
lower distortion and more lifelike stereo imaging, particularly off-axis. The L100 Classic is sure to become a new
legend among music lovers everywhere.
PACKAGE CONTENTS
• One L100 Classic loudspeaker
• One Quadrex foam grille
• One L100 Classic Owner’s Manual
PLACEMENT AND POSITIONING
CAUTION: The L100 Classic weighs 58.8 lb. (26.7 kg) each. Before placing the speaker on a shelf or
platform, be sure that it is sturdy enough to support the speaker’s weight.
Before deciding where to place your speakers, survey your room and think about placement, using the
illustration below as a guide.
• Avoid placing the speakers near power amplifiers, heat
registers or other objects that generate large amounts
of heat.
• Do not place the speakers in very humid or dusty places.
• Do not place the speakers in direct sunlight or where they
will be exposed to other intense light.
• For best results, place the speakers 6–8 feet (1.8-2.4m)
apart. If you set the speakers farther apart than this,
angle them toward the listening position.
• The speakers will produce the most accurate stereo
soundstage when the angle between the listener and the
speakers is between 40 and 60 degrees.
• Generally, bass output will increase as the speaker is
moved closer to a wall or corner. For best performance,
we recommend that you place the speakers at least 20 inches (50cm) away from the sidewalls.
• The speaker will yield the best stereo imaging when oriented vertically.
• The L100 Classic may be stand mounted with optional JBL metal stands (model JBL JS-120,
sold separately) that angle the speaker upward.
• If not using the optional stands with built-in angle, then we recommend you to position each speaker
so that its tweeter is approximately at ear level.
min 20 inches
(50cm)
6-8 feet
(1.8-2.4m)
40° – 60°
Listening Position
3
L100 Classic Owner’s Manual
English
CONNECTIONS
CAUTION: Make sure that all of the system’s electrical components are turned OFF (and preferably
unplugged from their ac outlets) before making any connections.
Speakers and amplifiers have corresponding positive and negative (“+” and “–”)
connection terminals. The L100 Classic has color-coded connection terminals. The
“+” terminal is red, while the “–” terminal is black. See the illustration on the right.
The L100 Classic is designed so that a positive voltage at the “+” (red) terminal
will cause the speaker drivers to move outward (toward the room).
We recommend using a high-quality speaker cable with polarity coding. The side
of the wire with a ridge or other coding is usually considered positive polarity (“+”).
To ensure proper polarity, connect each “+” terminal on the back of the amplifier
or receiver to the respective “+” ( ) terminal on each speaker. Connect the “–” red
( ) terminals in a similar way. See your receiver or amplifier’s owner’s manual black
to confirm its connection procedures.
BASIC SINGLE-WIRE CONNECTION
Connect the amplifier to each speaker as shown in
the illustration on the right.
IMPORTANT: Do not reverse polarities (i.e., “+”
to “–” or “–” to “+”) when making connections.
Doing so will cause poor stereo imaging and
diminished bass performance.
The L100 Classic’s gold-plated speaker terminals
can accept a variety of wire connector types:
bare wire, spade connectors, pin connectors
and banana connectors.
USING BARE WIRE OR PIN CONNECTORS:
IMPORTANT: Make sure that the (+) and (–) wires or
pins do not touch each other or the other terminal.
Touching cables can cause a short circuit that can
damage your receiver or amplifier.
USING SPADE CONNECTORS:
IMPORTANT: Make sure the (+) and (–) spade connector
blades do not touch each other or the other terminal.
Touching blades can cause a short circuit that
can damage your receiver or amplifier.
USING BANANA CONNECTORS:
Negative (-)
Terminal
Positive (+)
Terminal
+-
Receiver or Amplifier
(one channel shown) Speaker
Connector Panel
A. Unscrew Cap
B. Insert Bare Wire or
Pin Connector through
Hole in Post
C. Tighten Cap
to Secure
A. Unscrew Cap B. Insert Space
Connector Blades
around Post
C. Tighten Cap
B. Insert Banana Connector
into Hole in Cap
A. Tighten Cap

Specyfikacje produktu

Marka: JBL
Kategoria: głośnik
Model: L100 Classic

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z JBL L100 Classic, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik JBL

JBL

JBL B-6ICDT Instrukcja

11 Stycznia 2025
JBL

JBL B-8IC Instrukcja

11 Stycznia 2025
JBL

JBL 4349 Instrukcja

11 Stycznia 2025
JBL

JBL Tower X Marine MT10HLW Instrukcja

5 Stycznia 2025
JBL

JBL Control CM42AW Instrukcja

31 Grudnia 2025
JBL

JBL Performance P36AW Instrukcja

31 Grudnia 2025
JBL

JBL Balboa 30 Instrukcja

31 Grudnia 2025
JBL

JBL 250Ti Instrukcja

31 Grudnia 2025
JBL

JBL 800 Instrukcja

31 Grudnia 2025
JBL

JBL 900 Instrukcja

31 Grudnia 2025

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025
Hifonics

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025
Pyle

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025
ION

ION Insta Sound Instrukcja

15 Stycznia 2025
Pure Acoustics

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025
Yamaha

Yamaha WX-010 Instrukcja

15 Stycznia 2025
Polk

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025
Sennheiser

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025
Klipsch

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025