Instrukcja obsługi Janome Skyline S6

Janome maszyna do szycia Skyline S6

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Janome Skyline S6 (41 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/41

SERVICE MANUAL

MODEL: SKYLINE S6

First Edition: 12 December 2018

TABLE OF CONTENTS

Replacing external parts

Face cover 1 .........................................................................................................................................................

Belt cover 1 ...........................................................................................................................................................

Top cover 2 ...........................................................................................................................................................

Machine base 3 ....................................................................................................................................................

Base cover 3 .........................................................................................................................................................

Bed cover 3 ..........................................................................................................................................................

Free arm cover 4 ...................................................................................................................................................

Front cover 5 .........................................................................................................................................................

Rear cover 6 ..........................................................................................................................................................

Replacing mechanical parts

Needle threader hook position 7 ..........................................................................................................................

Replacing electronic components

Printed circuit board A 8 .......................................................................................................................................

Printed circuit board F 9 .......................................................................................................................................

Speed control slider 9 ...........................................................................................................................................

Switching power supply unit ............................................................................................................................ 10

DC motor 11 .........................................................................................................................................................

Thread tension unit 12 ..........................................................................................................................................

Mechanical adjustment

Feed dog height 13 ...............................................................................................................................................

Needle drop position 14 .......................................................................................................................................

Presser bar height 15 ............................................................................................................................................

Hook timing 16 .....................................................................................................................................................

Needle bar height 17 ............................................................................................................................................

Clearance between needle and tip of the rotary hook 18-19 ................................................................................

Presser bar lifter switch position adjustment ................................................................................................... 20

Backlash between hook drive gear and lower shaft gear 21 ................................................................................

Upper shaft shield plate position 22 .....................................................................................................................

Upper thread tension 23 ........................................................................................................................................

Buttonhole lever adjustment 24 ............................................................................................................................

Thread cutter 25 ...................................................................................................................................................

Solenoid position adjustment 26 ..........................................................................................................................

Upper feed dog 27-29 ...........................................................................................................................................

Stretch stitch feed balance 30 ..............................................................................................................................

Needle plate switch 31-32 ...................................................................................................................................

Knee lifter posotion 33 ..........................................................................................................................................

Diagnosis test 34-39 ............................................................................................................................................

PARTS LIST ...................................................................................................................................................... 40-61

Replacing external parts

Face cover

To remove:

1. Remove the setscrews A. Remove the face cover.

To attach:

Follow the above procedure in reverse.

Setscrew A

Belt cover

To remove:

1. Remove the cap and setscrew B.

2. Remove the setscrew C.

3. Loosen the two setscrews D.

4. Pull the rear side of the belt cover to disengage it from

the rear cover.

5. Remove the belt cover.

To attach:

Follow the above procedure in reverse.

Make sure all the tabs and hooks t together precisely.

Cap

Setscrew B

Setscrew C

Setscrew D

Specyfikacje produktu

Marka:	Janome
Kategoria:	maszyna do szycia
Model:	Skyline S6
Kolor produktu:	Biały
Typ kontroli:	Rotary, Touch
Napięcie wejściowe AC:	80-240 V
Wysokość produktu:	317.5 mm
Szerokość produktu:	482.6 mm
Głębokość produktu:	234.95 mm
Waga produktu:	10795 g
Typ ekranu:	LCD
Model:	Automatyczna maszyna do szycia
Typ zasilacza:	Prąd elektryczny
Uchwyt(y):	Nie
Bieg wsteczny:	Tak
Wbudowane światło:	Tak
Ilość diod oświetlenia:	6
Funkcje maszyny do szycia:	Szycie
Wolne ramię:	Tak
Typ dziurki guzika:	10 stopek
Liczba wzorów ściegów:	196
Regulowana pozycja igły:	Tak
Szerokość szwu:	5 mm
Automatyczny nawlekacz nitki:	Tak
Dołączone akcesoria do maszyny do szycia:	Buttonhole foot, Zigzag foot
Regulowanie wzoru spryskiwania:	Tak
Liczba pozycji igły:	91
Nawlekacz igły:	Tak