Instrukcja obsługi Janome Memory Craft 4400

Janome maszyna do szycia Memory Craft 4400

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Janome Memory Craft 4400 (70 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/70
IMPORTANT
Be sure to keep machine away from static electricity, heat sources, humidity, and direct sunlight.
When using your sewing machine for the first few times, place a waste fabric under the presser foot and
run the machine without thread for a few minutes. Wipe away any oil which may have appeared.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed, including the
followings:
Read all instructions before using this appliance.
DANGERTo reduce the risk of electric shock:
1. An appliance should never be left unattended when plugged in. Always unplug this sewing machine from the
electric outlet immediately after using and before cleaning.
2. Always unplug before replacing a sewing machine bulb. Replace bulb with same type rated 12 Volts, 5 Watts.
WARNING reduce the risk of burns, fire, electric shock, or injury to persons:To
1. Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near
children.
2. Use this appliance only for its intended use as described in this owners manual.
Use only attachments recommended by the manufacturer as contained in this owners manual.
3. Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water.
Return this sewing machine to the nearest authorized dealers or service center for examination, repair, electri-
cal or mechanical adjustment.
4. Never operate the appliance with any air opening blocked. Keep ventilation openings of this sewing machine
and foot controller free from accumulation of lint, dust and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
8. To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
9. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
10. Keep fingers away from all moving parts. Special care is required around the sewing machine needle.
11. Always use the proper needle plate. The wrong plate can cause the needle to break.
12. Do not use bent needles.
13. Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
14. Switch this sewing machine off (“O”) when making any adjustment in the needle area, such as threading the
needle, changing the needle, threading the bobbin or changing the presser foot, and the like.
15. Always unplug this sewing machine from the electrical outlet when removing covers, lubricating, or when
making any other adjustments mentioned in this owners manual.
SAVE THESE INSTRUCTIONS
1
SECTION I NAMES OF PARTS
Name of Parts ........................................................................ 3
Screen Sharpness Adjusting Dial .......................................... 4
Extension Table ..................................................................... 4
Standard Accessories ............................................................ 5
SECTION II GETTING READY TO SEW
Connecting Machine to Power Supply ................................. 6
For Your Safety ..................................................................... 6
Controlling Sewing Speed .................................................... 6
Main Function of Buttons/Keys ............................................ 7
• Up/down needle position button......................................... 7
Auto-lock button ................................................................. 7
• Reverse button .................................................................... 7
• Mode selection key ............................................................. 8
• Twin needle key .................................................................. 8
• Editing key ......................................................................... 8
• Stitch width selection key ................................................... 8
• Stitch length selection key .................................................. 8
• Message key ....................................................................... 9
• Turn-over memory key ....................................................... 9
• Elongation key .................................................................... 9
• Stock/call key ..................................................................... 9
• Clear key ........................................................................... 10
• Memory key ..................................................................... 10
• Direct pattern selection and number keys ........................ 10
• Pattern selection and screen indication ............................. 11
• Number key selection ........................................................11
Memory Mode/Buzzer Sound/Multiple
Language Settings ............................................................... 12
To Raise or Drop the Feed Dogs ......................................... 13
Pressure Lever ..................................................................... 13
Presser Foot Lifter .............................................................. 13
Changing Needles ............................................................... 14
To Attach and Remove the Presser Foot ............................. 14
To Remove and Attach the Foot Holder ............................. 14
Selecting Needle and Thread .............................................. 15
Winding the Bobbin ............................................................ 16
• Set the spool ..................................................................... 16
• Removing the bobbin ....................................................... 16
• Winding the bobbin .......................................................... 17
• Inserting the bobbin .......................................................... 18
Threading the Machine ....................................................... 19
• Threading the machine ..................................................... 19
• Needle threader ................................................................. 20
• Drawing up the bobbin thread .......................................... 21
Balanced Thread Tension .................................................... 22
Auto-thread tension .......................................................... 22
Manual thread tension adjustment .............................. 22
SECTION III BASIC SEWING
Straight Stitch Sewing ...................................................... 23
Starting to sew ................................................................ 23
Changing sewing direction ........................................... 23
Finishing sewing ............................................................. 23
Practice Common Stitching Skills ................................... 24
Using the Seam Guides on the Needle Plate ................ 24
Turning Square Corners ................................................... 24
Using the Quilting Bar ..................................................... 24
Sewing on Heavy Fabrics ................................................. 24
Manual stitch length ...................................................... 25
Variable needle position ............................................... 25
Various Utility Stitch ........................................................ 26
Basting ............................................................................ 26
Straight stitches .............................................................. 27
Automatic reverse stitch ............................................... 27
Triple stretch stitch ........................................................ 27
Auto-lock stitch .............................................................. 27
Stretch stitch ................................................................... 28
Saddle stitch ................................................................... 28
Sculpture stitch .............................................................. 28
Zigzag Stitch ...................................................................... 29
Interfacing ...................................................................... 29
To change the width and length ................................... 29
Variation of Zigzag Stitches ............................................ 30
Overcasting..................................................................... 30
Tricot stitch ..................................................................... 30
Knit stitch ....................................................................... 31
Overedge sewing (1) ..................................................... 31
SECTION IV DECORATIVE STITCHING
TECHNIQUES
Overedge Sewing (2), (3) ................................................. 32
Sewing Buttons ................................................................. 33
Sensor Buttonhole ....................................................... 34-37
Automatic buttonholing ................................................ 34
Sewing preparation........................................................ 35
Starting sewing ............................................................... 36
Adjusting Stitch Width and Density in Buttonholes .... 37
Sensor buttonhole 09 and 10 ........................................ 38
Adjusting the stitch width and
density in buttonholes 09 and 10 .................................. 38
Corded Buttonholes ......................................................... 39
Free Size Automatic Buttonhole 20 ................................ 40
Zipper Sewing ................................................................... 41
Put in a zipper ................................................................ 41
Attaching the zipper foot .............................................. 41
Fabric preparation ......................................................... 41
TABLE OF CONTENTS


Specyfikacje produktu

Marka: Janome
Kategoria: maszyna do szycia
Model: Memory Craft 4400

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Janome Memory Craft 4400, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje maszyna do szycia Janome

Janome

Janome MB-4S Instrukcja

10 Października 2024
Janome

Janome 760 Jem Platinum Instrukcja

8 Października 2024
Janome

Janome TB-12 Instrukcja

5 Października 2024
Janome

Janome 3434D Instrukcja

3 Października 2024
Janome

Janome 5812 Instrukcja

3 Października 2024
Janome

Janome 49018 Instrukcja

3 Października 2024
Janome

Janome 1110DX Instrukcja

3 Października 2024
Janome

Janome 234 Instrukcja

18 Września 2024
Janome

Janome MyLock 634D Instrukcja

18 Września 2024

Instrukcje maszyna do szycia

Najnowsze instrukcje dla maszyna do szycia

Pfaff

Pfaff 463H Instrukcja

15 Stycznia 2025
Elna

Elna Lotus ZZ Instrukcja

14 Stycznia 2025
Juki

Juki MS-1190 Instrukcja

12 Stycznia 2025
Pfaff

Pfaff 295-1 Instrukcja

12 Stycznia 2025
Alfa

Alfa 1412 Instrukcja

11 Stycznia 2025