Instrukcja obsługi Intermec ScanPlus 1800PDF

Intermec czytnik kodów kreskowych ScanPlus 1800PDF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intermec ScanPlus 1800PDF (171 stron) w kategorii czytnik kodów kreskowych. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/171
Installation Manual
ScanPlus 1800
Hand-held Scanner
P/N 0-360049-02
2
ScanPlus 1800 - Installation Manual
ScanPlus 1800 - Installation Manual - Edition 1.5 - compatible with EasySet System sp1800en.cmd - 99/07/26
The ScanPlus 1800 ST is a Class 2 Laser Scanner. Fix the laser warning labels onto the product if they are not already
present.
CAUTION - LASER LIGHT WHEN OPEN. DO NOT STARE INTO BEAM.
Regulatory Statements
Intermec hereby declares that the ScanPlus 1800 has been tested and found compliant with the below listed
standards as required by the EMC Directive 89/336/EEC as amended by 92/31/EEC and by the Low Voltage
Directive 73/23/EEC as amended by 93/68/EEC:
EN55022 (1992) EN50082-1 (1998) EN60950 (1993)
USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. It generates, uses and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it
may cause interference to radio communications. If this equipment causes interference, the user will be required to correct the
interference at the user’s own expense.
This equipment complies with the UL 1950 standard.
Canada: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
This equipment complies with the UL 1950 standard.
Cet équipement est conforme à la norme UL 1950.
Australia-New Zealand: This equipment has been tested and found to conform to the Australian EMC
framework concerning Class B digital devices, prescribed by the Australian and New-Zealander standard
AS/NZS 3548.
Mexico: Este equipo cumple con la certificatión NOM.
This equipment complies with the NOM certification.
The information contained in this document is for informational purposes only and is subject to change without notice. No part of
this document may be copied or reproduced in any manner without the prior written permission of Intermec Technologies
Corporation.
© Intermec Technologies Corporation All Rights Reserved
The word Intermec, the Intermec logo, ScanPlus and EasySet are either trademarks or registered trademarks of Intermec.
Throughout this document, trademarked names may be used. Rather than put a trademark ( or  ) symbol in every occurrence
of a trademarked name, we state that we are using the names only in an editorial fashion, and to the benefit of the trademark
owner, with no intention of infringement.
North America / Asia Pacific / Latin America
6001 36th Avenue West
PO Box 4280
Everett WA 98203-9280
Tel : +1 425 348 2600
Fax : +1 425 348 2833
U.S. service and technical support, tel: 1.800.755.5505
Canadian service and technical support, tel: 1.800.688.7043
Europe / Middle East / Africa
Sovereign House
Vastern Road
Reading RG1 8BT
England
Tel : +44 118 987 9420
Fax : +44 118 987 9416
Internet :
http://www.intermec.com
E-mail :
info@intermec.com
Support :
http://datacapture.intermec.com
N309
Contents
ScanPlus 1800 - Installation Manual
3
Contents
1. Using EasySet .............................................................................................. 9
online setup with RS-232 cable 0-364032-00 ........................................ 10
2. Reset all parameters ................................................................................... 11
3. Terminal / cash register used in your application .......................................... 13
connections.......................................................................................... 14
keyboard wedge........................................................................ 14
RS-232 ..................................................................................... 15
laser emulation .......................................................................... 16
wand emulation ......................................................................... 17
IBM 46xx cash registers............................................................. 18
OCIA cash registers................................................................... 18
predefined terminal selections .............................................................. 19
keyboard wedge........................................................................ 19
RS-232 ..................................................................................... 21
laser emulation .......................................................................... 24
wand emulation ......................................................................... 24
IBM 46xx cash registers............................................................. 26
OCIA cash registers................................................................... 27
custom interface number ...................................................................... 28
4. Data transmission settings........................................................................... 29
keyboard wedge................................................................................... 30
preamble................................................................................... 30
symbology identifier ................................................................... 31
postamble ................................................................................. 36
special keys interpretation (Code 39) ......................................... 38
special keys transmission .......................................................... 41
inter-character delay .................................................................. 43
inter-message delay .................................................................. 44

Specyfikacje produktu

Marka: Intermec
Kategoria: czytnik kodów kreskowych
Model: ScanPlus 1800PDF

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Intermec ScanPlus 1800PDF, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje czytnik kodów kreskowych Intermec

Intermec

Intermec SR31T HP Instrukcja

7 Września 2024
Intermec

Intermec CK31 Instrukcja

4 Września 2024
Intermec

Intermec SR61TL Instrukcja

3 Września 2024
Intermec

Intermec ScanPlus 1800 Instrukcja

2 Września 2024
Intermec

Intermec CK70 Instrukcja

1 Września 2024
Intermec

Intermec SR61T2D Instrukcja

31 Sierpnia 2024
Intermec

Intermec SR61THP Instrukcja

31 Sierpnia 2024
Intermec

Intermec SR61B Instrukcja

30 Sierpnia 2024
Intermec

Intermec Sabre 1551 Instrukcja

30 Sierpnia 2024
Intermec

Intermec SR30 Instrukcja

29 Sierpnia 2024

Instrukcje czytnik kodów kreskowych

Najnowsze instrukcje dla czytnik kodów kreskowych

Zebra

Zebra LS7808 Instrukcja

15 Stycznia 2025
Hamlet

Hamlet HBCS-2D360 Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HBCS2D120U Instrukcja

14 Stycznia 2025
Hamlet

Hamlet HBCS-2DUWB Instrukcja

14 Stycznia 2025
Newland

Newland HR2180 Instrukcja

11 Stycznia 2025
Datalogic

Datalogic Magellan 8302 Instrukcja

11 Stycznia 2025
Honeywell

Honeywell Orbit HF680 Instrukcja

29 Grudnia 2024
IFM

IFM DTE900 Instrukcja

5 Grudnia 2024
Newland

Newland NFT10 Pilot Pro Instrukcja

10 Października 2024
Posiflex

Posiflex CD-3602U Instrukcja

9 Października 2024