Instrukcja obsługi Intel NUC 8 Business

Intel Pulpit NUC 8 Business

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intel NUC 8 Business (13 stron) w kategorii Pulpit. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/13
User Guide for Intel® NUC 8
NUC8i7HNKQC and NUC8i7HVKVA
1
Intel® NUC 8 Business, a Mini PC with Windows® 10 NUC8i7HNKQC
Intel® NUC 8 Enthusiast, a Mini PC with Windows® 10 NUC8i7HVKVA
User
Guide
User Guide for Intel® NUC 8
NUC8i7HNKQC and NUC8i7HVKVA
2
Before You Begin
CAUTIONS
The procedures in this user guide sume familiarity with the general terminology associated with as
personal computers and with the safety practices a regulatory compliance required for using nd
and modifying electronic equipment.
Disconnect the computer from its power so ce and from any telecommunications link or netwo before ur rk
performi any of the procedures described in this guide. Failure to disconnect power, ng
telecommunications nks, or orks before you open the computer or perform procedures can li netw any
result in personal injury or equipment damage. Some circuitry on the board can continue operate even to
though the front panel power bu on is f.tt of
Follow these guidelines before you begin:
Always follow the steps in each procedure in the correct order.
Set up a log to record information about your computer, such as mo l, serial numbersde ,
installe tions, an conf at n informat d op d igur io ion.
Electrostati ischarge (ESD) can damage components. rform the procedures describe in c d Pe d
thi ch tes ap r onl at an ESD workstat n ing an a tatic wr t strap and a conductive foam y io us ntis is
pad. If such a stat n is not available, you n provide some ESD protection by wearing an io ca
antistatic wrist strap and attaching to a metal part of the computer chassis. it
Installation Precautions
When you inst an test the I el NUC, observe l warning an caut ns in the installat n all d nt al s d io io
instruct ns. io
To avoid injury, be careful of:
Sharp pins on connecto rs
Sharp pins circuit boards on
Rough edges and sharp corners on the chassis
Hot components (such as SSDs, processors, voltage regulators, a heat sinks) nd
Damage wires that could cause a short circuit to
Observe l rning caut ns that instruct you fe computer serv ng to qualif d tecal wa s and io to re r ici ie hnical
perso el. nn
Observe Safety and Regulatory Requirements
If you do not f w instruct ns, you increase your safety risk and the possibility of ollo these io
noncom iance wipl th regional laws and regul ions. at
User Guide for Intel® NUC 8
NUC8i7HNKQC and NUC8i7HVKVA
3
Thi guide s you w to: s tell ho
Open and Close the Chassis
Install and Remove Memory
Install a M.2 SSDn
Install a VESA Mount Bracket
Connect Power
Install an Operating System
Install the latest device drivers and software
Operating System Recovery
Open the Intel NUC Chassis
To open the Intel NUC chassis, follow these steps:
1. Using the included hex wrench, unscrew the six screws on the top cover of the chassis and lift the
cover.


Specyfikacje produktu

Marka: Intel
Kategoria: Pulpit
Model: NUC 8 Business

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Intel NUC 8 Business, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Pulpit Intel

Instrukcje Pulpit

Najnowsze instrukcje dla Pulpit

Acer

Acer Aspire AX3200 Instrukcja

15 Października 2024
Acer

Acer Chromebox CXI Instrukcja

15 Października 2024
Asus

Asus Vivo AiO V220IB Instrukcja

14 Października 2024
Vorago

Vorago NanoBay V3 Instrukcja

9 Października 2024
Asus

Asus A3202 Instrukcja

9 Października 2024
MSI

MSI CUBI-074TW Instrukcja

9 Października 2024
ECS

ECS LIVA Z5F PLUS Instrukcja

8 Października 2024
Acer

Acer CXI-i34GKM Instrukcja

8 Października 2024