Instrukcja obsługi Intel NUC 7 Business

Intel Pulpit NUC 7 Business

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Intel NUC 7 Business (12 stron) w kategorii Pulpit. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
User Guide for NUC7i3DNHNC
1
Intel® NUC7 Business, a Mini PC with Windows® 10 NUC7i3DNHNC
User Guide
User Guide for NUC7i3DNHNC
2
Before You Begin
CAUTIONS
The steps in this guide sume familiar with computer terminology with tas you’re and he
safety practices a regulatory compliance required for using and modifying computer nd
equipment.
Disconnect the computer from its power so ce and from any netwo before performi any of ur rk ng
the steps described in this guide.
Failure to disconnect power or orks before you open the computer or perform procedures netw any
can result in personal injury or equipment damage. Some circuitry on the board can continue and/
to ttoperate even though the front panel power bu on is f.of
Follow these guidelines before you begin:
Always follow the steps in each procedure in the correct order.
Create a log to record information about your computer, such as mo l, serial de
numbers installe tions, an, d op d conf at n informat igur io ion.
Electrostati ischarge (ESD) can damage components. rform the procedures c d Pe
describe in id th s ch te onl at an ESD workstat n ing an a tatic wr t strap and a ap r y io us ntis is
conductive foam pad. If such a stat n available, you io isn’t can provide some ESD
protection by wearing an antistatic wrist strap and attaching to a metal part of the it
computer chassis.
Installation Precautions
When you inst an test the I el NUC, observe l warning an caut ns in the installat n all d nt al s d io io
instruct ns. io
To avoid injury, be careful of:
Sharp pins on connecto rs
Sharp pins circuit boards on
Rough edges and sharp corners on the chassis
Hot components (such as SSDs, processors, voltage regulators, a heat sinks) nd
Damage wires that could cause a short circuit to
Observe Safety and Regulatory Requirements
If you f w don’t ollo these instruct ns, you increase your safety risk and the possibility of io
noncom iance wipl th regional laws and regul ions. at
User Guide for NUC7i3DNHNC
3
Thi guide s you w to: s tell ho
Upgrade mory (RAM)me
Change/install a M.2 SSDn
Change/install a 2.5-inch drive
Use a VESA mount bracket
Connect power
Set up Microsoft® Windows® 10
Install the latest device drivers and software
Recover the operang system
Open the Chassis
Unscrew the four corner screws on the bottom of the chassis and lift the cover.
Upgrade System Memory
The Intel NUC Kits NUC7i3DNHNC have two 2 -pin 4 -DIMM sockets60 DDR SO , pre-installed with
one 4GB DDR4 2133 MHz SO-DIMM.
To upgrade memory, be sure to select memory modules that meet these requirements:
1.2V low voltage memory
2133 MHz -DIMMs SO
Non-ECC
Find compatible memory modules in the Intel® Product Compatibility Tool.


Specyfikacje produktu

Marka: Intel
Kategoria: Pulpit
Model: NUC 7 Business

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Intel NUC 7 Business, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Pulpit Intel

Instrukcje Pulpit

Najnowsze instrukcje dla Pulpit

Acer

Acer Aspire AX3200 Instrukcja

15 Października 2024
Acer

Acer Chromebox CXI Instrukcja

15 Października 2024
Asus

Asus Vivo AiO V220IB Instrukcja

14 Października 2024
Vorago

Vorago NanoBay V3 Instrukcja

9 Października 2024
Asus

Asus A3202 Instrukcja

9 Października 2024
MSI

MSI CUBI-074TW Instrukcja

9 Października 2024
ECS

ECS LIVA Z5F PLUS Instrukcja

8 Października 2024
Acer

Acer CXI-i34GKM Instrukcja

8 Października 2024