Instrukcja obsługi Infinity Reference 6000cs

Infinity głośnik samochodowy Reference 6000cs

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Infinity Reference 6000cs (4 stron) w kategorii głośnik samochodowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
reference series
5000cs,6000cs &
6800cs
Thank you for purchasing Infinity’s Reference Series
automotive loudspeaker components. We’ve organized this manual
to make your installation as simple and trouble-free as possible.
Please read it thoroughly before proceeding. Remember to keep
your sales receipt with this manual in a safe place so both are
available for future reference.
instructions
- 2 -
IMPORTANT: Installation of automotive stereo
components can require extensive experience
with a variety of mechanical and electrical
procedures. Although these instructions explain
how to install Reference Series speakers in a
general sense, they do not show the exact
installation methods for your particular vehicle.
If you do not feel you have the experience, do
not attempt the installation yourself; instead, ask
your authorized Infinity car audio dealer about
professional installation options.
WARNING: Playing loud music in an automobile
can permanently damage your hearing, as well as
hinder your ability to hear traffic. The maximum
volume levels achievable with Infinity speakers,
combined with high power amplification, may
exceed safe levels for extended listening. We
recommend using low volume levels when
driving. Infinity accepts no liability for hearing
loss, bodily injury, or property damage as a result
of use or misuse of this product.
INSTALLATION ARNINGS ANDW TIPS
Always wear protective eyewear when using
any tools.
Turn off all audio systems and other electrical
devices before you start. Disconnect the ()
negative lead from your vehicles battery.
Keep speakers in their package until final
installation. When moving a speaker, always
rest it with the cone or dome facing up. Never
use force to install any speaker.
Check clearances on both sides of a planned
mounting surface before drilling any holes or
installing any screws. Remember that the
screws can extend behind the surface.
At the installation sites, locate and make a note
of all fuel lines, hydraulic brake lines, vacuum
lines, and electrical wiring. Use extreme caution
when cutting or drilling in and around these
areas.
CAUTION: In some cars, fuel tanks may be
located directly beneath the rear deck. Check
for adequate speaker basket clearance before
considering this location!
Before drilling or cutting holes, use a utility
knife to remove unwanted fabric or vinyl, to
keep material from snagging in a drill bit or
saw.
For door installations, check the clearance with
the windows throughout the range of the
window’s travel, and verify that a mounted
speaker will not interfere with the window
crank or power window mechanism.
If mounting speakers elsewhere, check for
clearance around rear deck torsion bars, glove
box, or other structural elements.
Do not mount speakers where they will get wet.
INSTALLATION
Figure 1.
Mounting the 5000cs woofer with the grille.
INSTALLATION
Figure 2.
Mounting the 6000cs woofer with the grille.
NOTE: The 6800cs is designed to replace speakers
installed behind existing vehicle grilles, and does
not include grilles. If you are mounting the 6800cs
woofer in a 6" x 8" location, use the supplied
adapter. The adapter is not required in 5" x 7"
applications.
- 3 -
INSTALLATION
Figure 3.
Mounting the 6000cs woofer in standard speaker
locations.
INSTALLATION
Figure 5A.
Mounting the tweeter using the I-Mount
(patent no. 5,859,917) flush-mounting kit.
Note: Aim the tweeter at the listening position by
sliding the stud in the groove on the back of the
tweeter cup and rotating the entire assembly in
the mounting surface. Lock the tweeter in place,
using the small retaining nut and the large plastic
mounting nut.
Figure 5B.
Note: The 6000cs uses an adapter to fit standard
6" openings. Secure the adapter ring to the
vehicle using the sheet-metal screws provided,
then attach the 6000cs woofer to the ring with
the machine screws.
Figure 4.
Mounting the 6000cs in 165mm speaker locations.
INSTALLATION
Figure 6.
Mounting the tweeter using the
surface-mounting kit.
CONNECTIONS
Connect the speakers to the crossover and
the crossover to the amplifier, observing proper
polarity.
Figure 7A.
Figure 7B.
1
SLIDE SCREW UP OR
DOWN TO ADJUST
TWEETER ANGLE.
4
SECURELY TIGHTEN
THE LARGE HAND NUT.
2
TIGHTEN NUT AND
WASHER TO LOCK
ANGLE SETTINGS.
3
ROTATE ENTIRE ASSEMBLY
TO AIM ANGLED TWEETER
TOWARD LISTENER.
SMALL LUG
IS NEGATIVE (–)
BIG LUG IS
POSITIVE (+)
TO AMPLIFIER
SPEAKER OUTPUTS TO WOOFER TO TWEETER
CONNECT + WIRE HERE
TO REDUCE TWEETER
OUTPUT LEVEL
+
++ _
_
_
TW
WFIN
- + - + - + -3dB
p/s 050
2ohm
2ohm
0.15mH
0.22mH
5.4uF
6.8uF
2
3
RED (+)
BLACK (—)
1
ATTA CH BASE
WITH SCREWS, THEN:
1
2
3


Specyfikacje produktu

Marka: Infinity
Kategoria: głośnik samochodowy
Model: Reference 6000cs

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Infinity Reference 6000cs, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik samochodowy Infinity

Instrukcje głośnik samochodowy

Najnowsze instrukcje dla głośnik samochodowy

Pioneer

Pioneer TS-500M Instrukcja

14 Grudnia 2024
Pioneer

Pioneer TS-A463R Instrukcja

14 Grudnia 2024
Pioneer

Pioneer TS-A653R Instrukcja

14 Grudnia 2024
Pioneer

Pioneer TS-A683R Instrukcja

14 Grudnia 2024
Pioneer

Pioneer TS-600M Instrukcja

14 Grudnia 2024
Pioneer

Pioneer TS-800M Instrukcja

14 Grudnia 2024
Pioneer

Pioneer TS-900M Instrukcja

14 Grudnia 2024
Pioneer

Pioneer TS-A693R Instrukcja

14 Grudnia 2024
Pioneer

Pioneer TS-X210 Instrukcja

14 Grudnia 2024
Sony

Sony XS-H1 Instrukcja

14 Października 2024