Instrukcja obsługi Infinity REF6832CF

Infinity głośnik REF6832CF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Infinity REF6832CF (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
2-3/8"
60mm
1/2"
12mm
8-11/16"
220mm
7-5/16"
185mm
3-9/16"
90mm
1-3/4"
44mm
8-1/8"
205mm
4-1/4"
107mm
5"
127mm
4-11/16"
118mm
5-9/16"
140mm
R E F E R E N C E
6832cf
Designed and engineered in the USA.Conception et design aux É.U.A.
A valid serial number is required for warranty coverage.Un numéro de série valable est exigé pour la couverture de la garantie.
Features,specifications and appearance are subject to change without notice.
Les dispositifs,les caractéristiques et l’aspect sont sujets au changement sans communication préalable.
Harman Consumer Group, Inc., 250 Crossways Park Drive,Woodbury, NY 11797 USA
www.infinitysystems.com
© 2009 Harman International Industries,Incorporated.All rights reserved.Tous droits réservés.• Part No.REF6832OM1/09
Infinity is a trademark of Harman International Industries,Incorporated,registered in the United States and/or other countries.
Infinity est une marque commerciale de Harman International Industries,Incorporated, déposée aux États-Unis et/ou dans d’autres pays.
Declaration of Conformity
We,Harman Consumer Group, Inc.
2, route de Tours
72500 Château du Loir
France
declare in own responsibility that the product described in this owner’s
manual is in compliance with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Klaus Lebherz
Harman Consumer Group, Inc.
Château du Loir,France 1/09
6832cf
BL (T-m) 4.80
DCR (ohms) 2.30
Mms (g) 18.03
Sd (sq cm) 178.1
Cms (μm/N) 178
Vas (l) 7.93
Fs (Hz) 88.8
Qes 1.00
Qms 5.95
Qt 0.86
SPECIFICATIONS
6832cf
Type: 6" x 8" \ 5" x 7"
2-Way
Custom Fit
Impedance: 2 Ohms
Power Handling,RMS: 60W
Power Handling,Peak: 180W
Frequency Response: 49Hz – 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product,please visit us at www.infinitysystems.com.
SPECIFICATIONS
6832cf
Type: 6" x 8" \ 5" x 7"
2-Way
Custom Fit
Impedance: 2 Ohms
Power Handling,RMS: 60W
Power Handling,Peak: 180W
Frequency Response: 49Hz – 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product,please visit us at www.infinitysystems.com.
SPECIFICATIONS
6832cf
Type: 6" x 8" \ 5" x 7"
2-Way
Custom Fit
Impedance: 2 Ohms
Power Handling,RMS: 60W
Power Handling,Peak: 180W
Frequency Response: 49Hz – 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product,please visit us at www.infinitysystems.com.
1x
2x
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
ROTATING TWEETER
The Reference 6832cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 6832cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 6832cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.

Specyfikacje produktu

Marka: Infinity
Kategoria: głośnik
Model: REF6832CF

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Infinity REF6832CF, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Infinity

Infinity

Infinity Reference REF507F Instrukcja

7 Października 2024
Infinity

Infinity Reference REF407F Instrukcja

7 Października 2024
Infinity

Infinity Reference REF507CF Instrukcja

7 Października 2024
Infinity

Infinity Reference REF687F Instrukcja

7 Października 2024
Infinity

Infinity Reference REF607CF Instrukcja

7 Października 2024
Infinity

Infinity Reference REF467F Instrukcja

7 Października 2024
Infinity

Infinity Reference REF307F Instrukcja

7 Października 2024
Infinity

Infinity Reference REF757T Instrukcja

5 Października 2024
Infinity

Infinity SAT-450 Instrukcja

22 Września 2024
Infinity

Infinity Kappa 303S Instrukcja

22 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024