Instrukcja obsługi Infinity REF5032CF

Infinity głośnik REF5032CF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Infinity REF5032CF (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
3-7/8"
98mm
5-1/8"
129mm
3-3/16"
80mm
4-3/4"
120mm
2-1/4"
57mm
9/16"
29mm
1-3/4"
44mm
R E F E R E N C E
5032i
5032cf
5032gr
Designed and engineered in the USA. Conception et design aux É.U.A.
A valid serial number is required for warranty coverage. Un numéro de série valable est exigé pour la couverture de la garantie.
Features,specifications and appearance are subject to change without notice.
Les dispositifs,les caractéristiques et l’aspect sont sujets au changement sans communication préalable.
Harman International, Consumer Division, 8500 Balboa Boulevard, Northridge, CA 91329 USA
www.infinitysystems.com
© 2009 Harman International Industries,Incorporated.All rights reserved.Tous droits réservés.s Part No.REF5032OM1/09
Infinity is a trademark of Harman International Industries,Incorporated, registered in the United States and/or other countries.
Infinity est une marque commerciale de Harman International Industries,Incorporated,déposée aux États-Unis et/ou dans d’autres pays.
Declaration of Conformity
We,Harman Consumer Group, Inc.
2, route de Tours
72500 Château du Loir
France
declare in own responsibility that the products described in this owner’s
manual are in compliance with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Klaus Lebherz
Harman Consumer Group,Inc.
Château du Loir,France 1/09
5032i 5032cf
BL (T-m) 3.25 3.25
DCR (ohms) 2.30 2.30
Mms (g) 10.22 10.22
Sd (sq cm) 103.9 103.9
Cms (μm/N) 521 521
Vas (l) 7.89 7.89
Fs (Hz) 69.0 69.0
Qes 0.96 0.96
Qms 6.94 6.94
Qt 0.85 0.85
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling, RMS: 45W 45W
Power Handling, Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cf”version
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product,please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling, RMS: 45W 45W
Power Handling, Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i version; they are optional for the “cf”version
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product,please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling, RMS: 45W 45W
Power Handling, Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cf” version
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling, RMS: 45W 45W
Power Handling, Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cf” version
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling, RMS: 45W 45W
Power Handling, Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cf” version
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling,RMS: 45W 45W
Power Handling, Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cf” version
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling, RMS: 45W 45W
Power Handling, Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cfversion
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling, RMS: 45W 45W
Power Handling, Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cfversion
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling, RMS: 45W 45W
Power Handling, Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cfversion
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling,RMS: 45W 45W
Power Handling, Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cfversion
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling,RMS: 45W 45W
Power Handling,Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cfversion
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling,RMS: 45W 45W
Power Handling,Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cfversion
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling,RMS: 45W 45W
Power Handling,Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cfversion
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product, please visit us at www.infinitysystems.com.
SPECIFICATIONS
5032i 5032cf 5032gr
Type: 5-1/4" (130mm) 5-1/4" (130mm) GRILLE ONLY
2-Way 2-Way for 5-1/4" (130mm)
NO GRILLE
Impedance: 2 Ohms 2 Ohms
Power Handling, RMS: 45W 45W
Power Handling,Peak: 135W 135W
Frequency Response: 67Hz 21kHz 67Hz 21kHz
Sensitivity (2.83V, 1m): 92dB 92dB
Grilles are included with the “i” version; they are optional for the “cfversion
(use Reference model 5032gr).
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity car audio retailer can help you determine the length
of your warranty.To register your product, please visit us at www.infinitysystems.com.
2x
5032gr
1x
2x
2x
5032i
1x
2x
5032cf
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.
ROTATING TWEETER
The Reference 5032i/cf includes a rotating,
angled tweeter mount, which is designed
to allow the tweeter to be aimed toward
the listening position. Since the tweeter’s
output becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging.
Before securing
the grille,
grasp the tweeter housing around
the edge and rotate the tweeter assembly
so that the tweeter faces the listener as
directly as possible.Then the grille may be
permanently secured.


Specyfikacje produktu

Marka: Infinity
Kategoria: głośnik
Model: REF5032CF

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Infinity REF5032CF, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Infinity

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024