Instrukcja obsługi Infinity Kappa 652.1I

Infinity głośnik samochodowy Kappa 652.1I

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Infinity Kappa 652.1I (4 stron) w kategorii głośnik samochodowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

Thank you for purchasing Infinity’s Kappa Series multi-

element automotive loudspeakers. We’ve organized this manual to

make your installation as simple and trouble-free as possible. Please

read it thoroughly before proceeding. Remember to keep your sales

receipt with this manual in a safe place so both are available for

future reference.

A P PA

ERIES

42.1i, 52.1i, 62.1i, 63.1i, 652.1i, 692.1i,

693.1i, 32.1cf, 462.1cf, 572.1cf

I N S T R U C T I O N S

- 2 -

IMPORTANT: Installation of automotive stereo

components can require extensive experience

with a variety of mechanical and electrical proce-

dures. Although these instructions explain how to

install Kappa Series speakers in a general sense,

they do not show the exact installation method

for your particular vehicle. If you do not feel you

have the experience, do not attempt the installa-

tion yourself, but instead ask your Authorized

Infinity Car Audio Dealer about professional

installation options.

WARNING: Playing loud music in an automotive

environment can permanently damage your hear-

ing, as well as hinder your ability to hear traffic.

The maximum volume levels achievable with

Infinity speakers, combined with high power

amplification, may exceed safe levels for

extended listening. We recommend using low

volume levels when driving. Infinity accepts no

liability for hearing loss, bodily injury or property

damage as a result of use or misuse of this

product.

S PPEAKER LACEMENT

Kappa speakers are designed to be easily

installed in stock speaker locations. While mount-

ing your speakers in the original factory locations

will, in most cases, provide excellent sonic

results, the best sounding installations are a

result of adherence to a few basic rules.

• For the most spacious stereo image, place the

left and right speakers as far apart as possible.

• For enhanced center image, place the left and

right speakers so they are equidistant from the

listening position. If possible, try to place them

as far forward as possible.

• For best treble response, aim each speaker

so that its sound waves will converge at the

listener’s ears. This will take advantage of the

tweeter’s directional nature and provide the

best on-axis high-frequency response.

• For models with UniPivot™ tweeters (52.1i,

62.1i, 652.1i, 692.1i and 572.1cf) aim the tweeter

at the listening position by rotating it up to 355

degrees.

INSTALLATION ARNINGS AND IPSW T

• Always wear protective eyewear when using

any tools.

• Turn off all audio systems and other electrical

devices before you start. Disconnect the (–) neg-

ative lead from your vehicle’s battery.

• Keep speakers in their package until final instal-

lation. When moving a speaker, always rest it

with the cone or dome facing up. Never use

force to install any speaker.

• Check clearances on both sides of a planned

mounting surface before drilling any holes or

installing any screws. Remember that the

screws can extend behind the surface.

• At the installation sites, locate and make a note

of all fuel lines, hydraulic brake lines, vacuum

lines and electrical wiring. Use extreme caution

when cutting or drilling in and around these

areas.

CAUTION: In some cars, fuel tanks may be

located directly beneath the rear deck. Check for

adequate speaker basket clearance before

considering this location!

• Before drilling or cutting holes, use a utility

knife to remove unwanted fabric or vinyl, to

keep material from snagging in a drill bit or

saw.

• For door installations, check the clearance with

the windows throughout the range of the win-

dow’s travel, and verify that a mounted speaker

will not interfere with the window crank or

power window mechanism.

• If mounting speakers elsewhere, check for clear-

ance around rear deck torsion bars, glove box

or other structural elements.

• Do not mount speakers where they will get wet.

Mounting Ears Removed

Two-Screw Mounting Configuration

Figure 2

INSTALLATION

Figure 1

Grille

Screen

Trim Ring

Car Door

Typical installation of the Kappa i Series speakers

with grilles as shown in Figure 2.

NOTE:The cf Series is designed for direct replace-

ment of factory speakers. Therefore they do not

contain the grilles and trim shown in Figure 2.

Installation of these models simply entails

reversing the steps taken to remove the original

speakers.

- 3 -

A NOTE ON P HOWER ANDLING

Kappa speakers are designed to produce reason-

able volume levels with little amplifier power.

However, the addition of an amplifier to drive

your speakers and a subwoofer will enhance the

dynamic range of your system, and help over-

come the ambient noise in a moving vehicle.

Kappa speakers are designed to handle the power

of a dedicated amplifier driven at or below its

rated power. If an amplifier is driven far above its

rated power, the output signal will “clip,” and the

additional power present in a clipped signal can

damage any speaker. Distorted or “fuzzy” sound

from your speakers is an indication that the ampli-

fier has exceeded its rated power, and you should

reduce the volume level.

SPECIFICATIONS TANDARD ERIES: KAPPA S S

42.1i

Type: 4" 2-Way

Speaker Impedance: 4 ohms

Power Handling: 45W

Frequency Response: 80Hz ~ 20kHz

Sensitivity: 89Hz @ 2.83 V, 1 watt

Mounting Depth, Drop-in: 1-3/4" (45 mm)

Cut-out Diameter: 3-3/4" (96 mm)

52.1i

Type: 5-1/4" 2-Way

Speaker Impedance: 4 ohms

Power Handling: 50W

Frequency Response: 59Hz ~ 20kHz

Sensitivity: 89Hz @ 2.83 V, 1 watt

Mounting Depth, Drop-in: 2-7/16" (62 mm)

Cut-out Diameter: 4-13/16" (123 mm)

62.1i

Type: 6-1/2" 2-Way

Speaker Impedance: 4 ohms

Power Handling: 70W

Frequency Response: 50Hz ~ 20kHz

Sensitivity: 89Hz @ 2.83 V, 1 watt

Mounting Depth, Drop-in: 2-7/16" (62 mm)

Cut-out Diameter: 5-1/8" (131 mm)

63.1i

Type: 6-1/2" 3-Way

Speaker Impedance: 4 ohms

Power Handling: 70W

Frequency Response: 50Hz ~ 21kHz

Sensitivity: 89Hz @ 2.83 V, 1 watt

Mounting Depth, Drop-in: 2-7/16" (62 mm)

Cut-out Diameter: 5-1/8" (131 mm)

652.1i

Type: 165 mm 2-Way

Speaker Impedance: 4 ohms

Power Handling: 70W

Frequency Response: 50Hz ~ 20kHz

Sensitivity: 89Hz @ 2.83 V, 1 watt

Mounting Depth, Drop-in: 2-9/16" (66 mm)

Cut-out Diameter: 5-11/16" (145 mm)

692.1i

Type: 6" x 9" 2-Way

Speaker Impedance: 4 ohms

Power Handling: 100W

Frequency Response: 38Hz ~ 20kHz

Sensitivity: 89Hz @ 2.83 V, 1 watt

Mounting Depth, Drop-in: 2-3/4" (70 mm)

Cut-out Diameter: 5-11/16" x 8-3/4"

(145 mm x 223 mm)

693.1i

Type: 6" x 9" 3-Way

Speaker Impedance: 4 ohms

Power Handling: 100W

Frequency Response: 38Hz ~ 21kHz

Sensitivity: 89Hz @ 2.83 V

Mounting Depth, Drop-in: 2-3/4" (70 mm)

Cut-out Diameter: 5-11/16" x 8-3/4"

(145 mm x 223 mm)

G CENERAL ARE

The loudspeaker grilles may be cleaned with a

slightly damp cloth. Do not use any cleaners or

solvents on the grilles or the speaker cones.

Specyfikacje produktu

Marka:	Infinity
Kategoria:	głośnik samochodowy
Model:	Kappa 652.1I

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Infinity Kappa 652.1I, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik samochodowy Infinity

Infinity Kappa 572.5CF Instrukcja

18 Grudnia 2024

Infinity Kappa 692.9I Instrukcja

18 Grudnia 2024

Infinity Kappa 462.5CFP Instrukcja

18 Grudnia 2024

Infinity Kappa 682.7CF Instrukcja

18 Grudnia 2024

Infinity Kappa 462.7CFP Instrukcja

18 Grudnia 2024

Infinity Kappa 652.9I Instrukcja

18 Grudnia 2024

Infinity Kappa 572.1CF Instrukcja

18 Grudnia 2024

Infinity Kappa 652.1I Instrukcja

18 Grudnia 2024

Infinity Kappa 65.7CS Instrukcja

18 Grudnia 2024

Infinity Kappa 652.7I Instrukcja

18 Grudnia 2024

Instrukcje głośnik samochodowy

Najnowsze instrukcje dla głośnik samochodowy

Philips TAC5636 Instrukcja

20 Grudnia 2024

Philips TAC6326 Instrukcja

20 Grudnia 2024

JBL Power P662s Instrukcja

20 Grudnia 2024

JBL Stage 502 Instrukcja

20 Grudnia 2024

JBL Power P-332 Instrukcja

20 Grudnia 2024

JBL Stage3 627F Instrukcja

19 Grudnia 2024

JBL Stage 8602 Instrukcja

19 Grudnia 2024

Pioneer TS-500M Instrukcja

14 Grudnia 2024

Pioneer TS-A463R Instrukcja

14 Grudnia 2024

Pioneer TS-A653R Instrukcja

14 Grudnia 2024