Instrukcja obsługi Infinity Kappa 60.3cs

Infinity głośnik samochodowy Kappa 60.3cs

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Infinity Kappa 60.3cs (4 stron) w kategorii głośnik samochodowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

- 2 -

ABOUT THESE INSTRUCTIONS

Installation of automotive stereo components

can require extensive experience with a variety

of mechanical and electrical procedures. Although

these instructions explain how to install Kappa

Series Component Systems in a general sense, they

do not show the exact installation methods for your

particular vehicle. If you do not feel you have the

experience, do not attempt the installation yourself,

but instead ask your authorized Infinity car audio

dealer about professional installation options.

LOUD MUSIC AND HEARING

Playing loud music in an automobile can hinder

your ability to hear traffic, as well as permanently

damage your hearing. The maximum volume lev-

els achievable with Infinity speakers, combined

with high power amplification, may exceed safe

levels for extended listening. We recommend

using low volume levels when driving. Infinity

accepts no liability for hearing loss, bodily injury,

or property damage as a result of use or misuse

of this product.

REAR DECK PRECAUTION

In some cars, fuel tanks may be located directly

beneath the rear deck. Before installation, make

sure there is adequate speaker basket clearance

before considering this location!

ABOUT THE CONTENTS

The Kappa Component System includes:

• 5 -1 ⁄4" or 6 -1 ⁄ 2" or 165mm woofer

• Grille and mounting adapter(s)

• 1" tweeter with surface/flush I-Mount™(patent

no. 5,859,917) kits

• Crossover network with mounting screws

NOTE: The supplied crossover network is designed

to work with the above-listed transducers. Do not

substitute another crossover network or use other

speakers when connecting the system (see

Figure 7A).

INSTALLATION TIPS

• Always wear protective eyewear when using

any tools.

•Turn off all audio components and other

electrical devices before you start. Disconnect

the ( ) negative lead from your vehicle– ’s battery.

•Keep speakers in their package until final

installation. When moving a speaker, always

rest it with the cone or dome facing up. Never

use force to install any speaker.

•Check clearances on both sides of a planned

mounting surface before drilling any holes or

installing any screws. Remember that the

screws can extend behind the surface.

•At the installation sites, locate and make a

note of all fuel lines, hydraulic brake lines,

vacuum lines and electrical wiring. Use

extreme caution when cutting or drilling in

and around these areas.

•Before drilling or cutting holes, use a utility

knife to remove unwanted fabric or vinyl,

to keep material from snagging in a drill bit

or saw.

•For door installations, check the clearance

with the windows throughout the range of the

window’s travel, and verify that a mounted

speaker will not interfere with the window

crank or power window mechanism.

•If mounting speakers elsewhere, check for

clearance around rear deck torsion bars, glove

box or other structural elements.

•Do not mount speakers where they will get wet.

•If possible, select a mounting site for the

crossover network that is near the speakers and

provides easy access for connections.

Figure 1. Mounting the 50.3cs woofer with

the grille.

Figure 2. Mounting the 60.3cs woofer with

the grille.

INSTALLATION ARNINGS ANDW TIPS INSTALLATION

- 3 -

Figure 3. Mounting the 60.3cs woofer in a standard

speaker location. A variety of adapter rings are

supplied to fit many installation configurations.

Figure 4. Mounting the 65.3cs in a 165mm

speaker location.

Figure 5A. Mounting the tweeter using the

I-Mount™flush-mounting kit.

Figure 5B. Aiming the tweeter at a desired

listening position.

Figure 6. Mounting the tweeter using the

I-Mount™ surface-mounting kit.

Remove the cover and mount the crossover

network. Observing proper polarity, connect the

speakers and amplifier, as shown in Figures 7A

and 7B. When done, replace the cover.

Figure 7A. Wiring connections on the crossover

network (shown with cover on).

Figure 7B. Locating wiring connections on the

50.3cs woofer. Other woofers are wired similarly.

SLIDE SCREW UP OR

DOWN TO ADJUST

TWEETER ANGLE.

SECURELY TIGHTEN

THE LARGE HAND NUT.

TIGHTEN NUT AND

WASHER TO LOCK

ANGLE SETTINGS.

ROTATE TO AIM

ANGLED TWEETER

TOWARD LISTENER.

Big Lug =

Small Lug =

To AMPLIFIER

SPEAKER OUTPUTS To WOOFER To TWEETER

Red

Blk

ADAPTER RING(S)

–

red

blk

–

red

blk

INSTALLATION ONNECTIONSC

Specyfikacje produktu

Marka:	Infinity
Kategoria:	głośnik samochodowy
Model:	Kappa 60.3cs

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Infinity Kappa 60.3cs, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik samochodowy Infinity

Infinity Kappa 40.1cs Instrukcja

17 Grudnia 2024

Infinity Kappa 60.9cs Instrukcja

17 Grudnia 2024

Infinity Kappa 60.3cs Instrukcja

17 Grudnia 2024

Infinity Kappa 60.2cs Instrukcja

17 Grudnia 2024

Infinity Kappa 60.7cs Instrukcja

17 Grudnia 2024

Infinity Kappa 50.1cs Instrukcja

17 Grudnia 2024

Infinity Kappa 57.1cs Instrukcja

17 Grudnia 2024

Infinity Kappa 652.2cs Instrukcja

17 Grudnia 2024

Infinity Kappa 652.1cs Instrukcja

17 Grudnia 2024

Infinity Kappa 65.5cs Instrukcja

17 Grudnia 2024

Instrukcje głośnik samochodowy

Najnowsze instrukcje dla głośnik samochodowy

Pioneer TS-500M Instrukcja

14 Grudnia 2024

Pioneer TS-A463R Instrukcja

14 Grudnia 2024

Pioneer TS-A653R Instrukcja

14 Grudnia 2024

Pioneer TS-A683R Instrukcja

14 Grudnia 2024

Pioneer TS-600M Instrukcja

14 Grudnia 2024

Pioneer TS-800M Instrukcja

14 Grudnia 2024

Pioneer TS-900M Instrukcja

14 Grudnia 2024

Pioneer TS-A693R Instrukcja

14 Grudnia 2024

Pioneer TS-X210 Instrukcja

14 Grudnia 2024

Sony XS-H1 Instrukcja

14 Października 2024