Instrukcja obsługi Infinity Kappa 10.2T

Infinity głośnik samochodowy Kappa 10.2T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Infinity Kappa 10.2T (8 stron) w kategorii głośnik samochodowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

kappa series

10.2t

Thank you

for purchasing the Infinity Kappa Series 10.2t

tweeter. We’ve organized this manual to make your installation as

simple and trouble-free as possible. Please read it thoroughly

before proceeding. Remember to keep your sales receipt with this

manual in a safe place so both are available for future reference.

instructions

Figure 2.

Mounting the Kappa 10.2t tweeter

using the I-Mount flush-mounting kit.

- 2 -

IMPORTANT:

Installation of automotive

stereo components can require extensive

experience with a variety of mechanical and

electrical procedures. Although these instruc-

tions explain how to install a Kappa 10.2t in a

general sense, they do not show the exact

installation methods for your particular

vehicle. If you do not feel you have the

necessary experience, do not attempt the

installation yourself, but instead ask your

authorized Infinity car-audio dealer about

professional installation options.

WARNING:

Playing loud music in an automo-

bile can permanently damage your hearing,

as well as hinder your ability to hear traffic.

The maximum volume levels achievable

with Infinity speakers, combined with high

power amplification, may exceed safe levels

for extended listening. We recommend

using low volume levels when driving.

Infinity accepts no liability for hearing loss,

bodily injury or property damage as a result

of use or misuse of this product.

S PPEAKER LACEMENT

Kappa speakers are designed to be easily

installed in stock speaker locations. While

mounting your speakers in the original fac-

tory locations will, in most cases, provide

excellent sonic results, the best-sounding

installations are a result of adherence to a

few basic rules.

• For the most spacious stereo image,

place the left and right speakers as far

apart as possible.

• For enhanced center image, place the

left and right speakers so they are

equidistant from the listening position.

If possible, try to place them as far

forward as possible.

• For best treble response when tweeters

are flush-mounted in the I-Mount™

(pat. 5,859,917), aim them at the listening

position by adjusting the tweeter angle in

the cup, tightening the small metal lock-

ing nut behind the assembly and rotating

the entire assembly in its mounting

location before tightening the large

plastic locking nut behind the panel

(see Fig. 2).

INSTALLATION ARNINGS ANDW TIPS

• Always wear protective eyewear when using

any tools.

• Turn off all audio systems and other electrical

devices before you start. Disconnect the (–)

negative lead from your vehicle’s battery.

• Keep components in their package until final

installation. When moving a speaker, always

rest it with the cone or dome facing up. Never

use force to install any speaker.

• Check clearances on both sides of a planned

mounting surface before drilling any holes or

installing any screws. Remember that the

screws can extend behind the surface.

• At the installation sites, locate and make a

note of all fuel lines, hydraulic brake lines, vac-

uum lines and electrical wiring. Use extreme

caution when cutting or drilling in and around

these areas.

CAUTION: In some cars, fuel tanks may be

located directly beneath the rear deck. Check

for adequate speaker basket clearance before

considering this location!

• Before drilling or cutting holes, use a utility

knife to remove unwanted fabric or vinyl, to

keep material from snagging in a drill bit

or saw.

• For door installations, check the clearance with

the windows throughout the range of the win-

dow’s travel, and verify that a mounted speaker

will not interfere with the window crank or

power window mechanism.

• If mounting components elsewhere, check for

clearance around rear-deck torsion bars, glove

box or other structural elements.

• Do not mount components where they

will get wet.

–

T IWEETER NSTALLATION

Figure 1. Mounting the Kappa 10.2t tweeter using

the I-Mount surface-mounting kit.

Specyfikacje produktu

Marka:	Infinity
Kategoria:	głośnik samochodowy
Model:	Kappa 10.2T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Infinity Kappa 10.2T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik samochodowy Infinity

Infinity Kappa 680.9cs Instrukcja

26 Grudnia 2024

Infinity Kappa 680.7cs Instrukcja

26 Grudnia 2024

Infinity Reference 6830cs Instrukcja

26 Grudnia 2024

Infinity Reference 6810cs Instrukcja

26 Grudnia 2024

Infinity Kappa 52.5I Instrukcja

26 Grudnia 2024

Infinity Kappa Perfect 5.1 Instrukcja

26 Grudnia 2024

Infinity Kappa 42.9I Instrukcja

26 Grudnia 2024

Infinity Kappa 693.9I Instrukcja

26 Grudnia 2024

Infinity Kappa 693.5I Instrukcja

26 Grudnia 2024

Infinity Kappa 693.1I Instrukcja

26 Grudnia 2024

Instrukcje głośnik samochodowy

Najnowsze instrukcje dla głośnik samochodowy

Sony XS-W104ES Instrukcja

13 Stycznia 2025

JL Audio C2-650 Instrukcja

11 Stycznia 2025

JBL P963 Instrukcja

31 Grudnia 2025

Hertz HEX 6.5 IC-W Instrukcja

31 Grudnia 2025

JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/TN Instrukcja

30 Grudnia 2025

Kicker 51KST2504 Instrukcja

27 Grudnia 2024

Kicker 51KST2004 Instrukcja

27 Grudnia 2024

Focal IC BMW 100 v2 Instrukcja

25 Grudnia 2024

Focal IS BMW 100 v2 Instrukcja

25 Grudnia 2024

JBL 408GTi Instrukcja

25 Grudnia 2024