Instrukcja obsługi Infinity FPS-1000

Infinity głośnik FPS-1000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Infinity FPS-1000 (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Owner’s Manual
®
Flat-Panel Loudspeaker
FPS-1000
A
BOUT
T
HIS
P
RODUCT
...
I
MPORTANT
!
P
OSITION
W
ITHIN
A R
OOM
W
ILL
S
TRONGLY
I
NFLUENCE
P
ERFORMANCE
...
INTRODUCTION
The Innity FPS-1000 has been designed to oer the look of a custom-
designed, in-wall speaker system in an easy-to-install on-wall product.
Installation simply entails properly mounting your FPS-1000 to any at wall
surface.
Note that the FPS-1000 must be mounted using proper anchoring hardware
(not included). You should ask an installation professional for help if you’re
unsure about the safety of your mounting location.
UNPACKING THE PEAKERSS
Check your FPS-1000’s carefully. If they have been damaged in transit, report
the damage immediately by calling your dealer and/or the trucking firm that
delivered them.
POSITIONING
Since the location of the FPS-1000s will aect performance, it is essential you
read this section very carefully prior to mounting the speakers. Should you
have any questions relating to their installation, it’s advisable that you call either
your dealer or Innity’s Customer Service Department for advice.
Positioning tips:
When possible, mount your FPS-1000s where there is an unobstructed view of
them from your listening area.
For the best possible stereo-sound presentation, mount your FPS-1000’s on the
same wall, about 6–8 feet apart.
Position the high-frequency drivers (tweeters) as close to ear level as
possible. When this is not possible, you can improve the performance of your
FPS-1000’s by aiming the rotatable tweeters toward your main listening area.
2
FPS-1000 – Owner’s Manual
Figure 1.
NOTE: This
wire is at
and about 5/8" wide.
Figure 2.
HOOKUP
Your FPS-1000’s are packaged with special at speaker wire. When connecting
your FPS-1000’s with this wire, make sure to use correct polarity for the
+ and – connections. We suggest using the ribbed conductor for the positive
terminal. See Figure 1.
The at speaker wire allows you to neatly run the wire down/up the wall to
your speakers (see Figure 2). The wires can be painted to better blend in with
your decor.
M FPS-1000’OUNTING S
Your FPS-1000’s come with four keyhole mounting locations at the rear corners
of the enclosures.
NOTE: The customer is responsible for the correct selection and use of mounting
hardware (available through hardware stores) that is necessary for the safe and
proper wall mounting of the speakers.
FRONT OF FPS-1000
RIGHTLEFT
Receiver/Amplier
– L + R +
Ribbed conductor
REAR OF FPS-1000
+ –+
RIGHTLEFT
Receiver/Amplier
– L + R +
Ribbed conductor
FPS-1000 – Owner’s Manual
3


Specyfikacje produktu

Marka: Infinity
Kategoria: głośnik
Model: FPS-1000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Infinity FPS-1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Infinity

Instrukcje głośnik

Najnowsze instrukcje dla głośnik