Instrukcja obsługi Infinity 6030cs


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Infinity 6030cs (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
4-1/4"
110mm 2-1/16"
51mm
4-1/2"
115mm
6-5/16"
159mm
3-9/16"
90mm
1-13/16"
45mm
3-1/4"
84mm
5"
127mm
2-3/8"
60mm
2-1/16"
52mm
1/2"
19mm
7/8"
22mm
11/16"
17mm
1-3/4"
44mm
1-1/8"
30mm
R E F E R E N C E
6030cs
Declaration of Conformity
We,Harman Consumer Group,Inc.
2, route de Tours
72500 Château du Loir
France
declare in own responsibility that the product described in this owner’s
manual is in compliance with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Klaus Lebherz
Harman Consumer Group, Inc.
Château du Loir, France 4/09
6030cs
BL (T-m) 4.70
DCR (ohms) 2.30
Mms (g) 15.10
Sd (sq cm) 132.7
Cms (µm/N) 236
Vas (l) 5.84
Fs (Hz) 84.3
Qes 0.83
Qms 6.61
Qt 0.74
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product,please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product,please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product, please visit www.infinitysystems.com.
SPECIFICATIONS
6030cs
Type: 6-1/2" (160mm)
2-Way Component
Impedance: 2 Ohms
Power Handling,RMS: 90W
Power Handling,Peak: 270W
Frequency Response: 53Hz 21kHz
Sensitivity (2.83V, 1m): 93dB
WARRANTY:
Reference Series speakers are warranted against defects.
The duration of the speaker’s warranty depends on the laws in the country in which it
was purchased.Your local Infinity®car audio retailer can help you determine the length
of your warranty.To register your product,please visit www.infinitysystems.com.
Designed and engineered in the USA.Conception et design aux É.U.A.
A valid serial number is required for warranty coverage.Un numéro de série valable est exigé pour la couverture de la garantie.
Features,specifications and appearance are subject to change without notice.
Les dispositifs, les caractéristiques et l’aspect sont sujets au changement sans communication préalable.
Harman Consumer Group, Inc., 8500 Balboa Blvd.,Northridge, CA 91329 11797 USA
www.infinitysystems.com
© 2009 Harman International Industries,Incorporated.All rights reserved.Tous droits réservés.Part No.REF6030CSOM4/09
Infinity is a trademark of Harman International Industries,Incorporated,registered in the United States and/or other countries.
I-Mount is a trademark of Harman International Industries,Incorporated.
Infinity est une marque commerciale de Harman International Industries,Incorporated,déposée aux États-Unis et/ou dans d’autres pays.
I-Mount est une marque commerciale de Harman International Industries,Incorporated.
1x 12x 4x 4x 4x 2x 2x 8x
2x2x 2x 2x 2x
1
2
4
3
1
2
3
1
2
3
2x2x2x 2x2x2x
ROTATING TWEETER
This component system includes the
I-Mountfeature, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the proper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position. Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mountfeature, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the proper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mountfeature, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the pr oper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position. Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mountfeature, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the pr oper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mountfeature, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the proper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position. Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mountfeature, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the proper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mountfeature, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the pr oper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position. Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mountfeature, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the pr oper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position.Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB”position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB”position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flatresponse.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the 0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference,or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently flatresponse.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
TWEETER-LEVEL
CONTROL
This speaker system is equipped with a
tweeter-level switch.The normal setting for
this switch is the “0dB” position, which pro-
vides an apparently “flat” response.Tweeter
output may be increased according to the
user’s preference, or to compensate for off-
axis placement (where the speaker does not
directly face the listening position), by set-
ting the switch to the “+3dB” position.
ROTATING TWEETER
This component system includes the
I-Mount(patent no. 5,859,917) feature,
an extremely versatile tweeter-mounting
system, which is designed to allow the
tweeter to be aimed toward the listening
position. Since the tweeter’s output becomes
directional at extremely high frequencies,
aiming the tweeter toward the listening
position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams. With the tweeter
mounted in the proper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position. Secure the small nut
to lock the angle, then tighten the large
hand nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mountfeature, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the proper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position. Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mountfeature, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams. With the tweeter
mounted in the proper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position. Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mountfeature, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the proper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position. Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mountfeature, an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the proper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position. Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.
ROTATING TWEETER
This component system includes the
I-Mountfeature,an extremely versatile
tweeter-mounting system, which is designed
to allow the tweeter to be aimed toward the
listening position. Since the tweeter’s output
becomes directional at extremely high
frequencies, aiming the tweeter toward the
listening position will improve high-frequency
response and stereo imaging. Refer to
the mounting diagrams.With the tweeter
mounted in the proper location, rock the
tweeter element in the slot and rotate the
entire assembly to aim the tweeter toward
the listening position. Secure the small nut
to lock the angle, then tighten the large hand
nut to lock the rotational position.


Specyfikacje produktu

Marka: Infinity
Kategoria: głośnik
Model: 6030cs

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Infinity 6030cs, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje głośnik Infinity

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024