Instrukcja obsługi Indesit K3C51.A (W)/U

Indesit piekarnik K3C51.A (W)/U

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Indesit K3C51.A (W)/U (68 stron) w kategorii piekarnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/68
GB
COOKER AND OVEN
K3C51.A /U
Contents
Installation, 2-3
Positioning and levelling
Electrical connections
Technical data
Description of the appliance, 4
Overall view
Control panel
Start- an se,up d u 5-8
Using the oven
Cooking modes
Cooking advice table for the oven
Using the g class eramic hob, 9
Switching the cooking zones on and off
Cooking zones
Precautions an tid ps, 10
General safety
Disposal
Respecting and conserving the environment
Care can aintenand m e, 11
Switching the appliance off
Cleaning the appliance
Replacing the oven light bulb
Cleaning the glass ceramic hob
Assistance
Operating Instructions
English, 1
GB
Polski, 12
PL
Magyar, 23
HU
Ðóññêèè, 34
RS
Èesky, 56
CZ
Slovensko, 45
SL
2
GB
Before operating your new appliance please read
this instruction booklet carefully. It contains
important information concerning the safe installation
and operation of the appliance.
Please keep these operating instructions for future
reference. Make sure that the instructions are kept
with the appliance if it is sold, given away or moved.
The appliance must be installed by a qualified
professional according to the instructions provided.
Any necessary adjustment or maintenance must be
performed after the cooker has been disconnected
from the electricity supply.
Positioning an led velling
It is possible to install the appliance alongside
cupboards whose height does not exceed that of the
hob surface.
Make sure that the wall in contact with the beck of
the appliance is made from a non-flammable, heat-
resistant material (T 90°C).
To install the appliance correctly:
Place it in the kitchen, dining room or the bed-sit
(not in the bathroom).
If the top of the hob is higher than the cupboards,
the appliance must be installed at least 200 mm
away from them.
If the cooker is
installed underneath a
wall cabinet, there must
be a minimum distance
of 420 mm between this
cabinet and the top of
the hob.
This distance should be
increased to 700 mm if
the wall cabinets are
flammable (see figure).
Do not position blinds behind the cooker or less
than 200 mm away from its sides.
Any hoods must be installed according to the
instructions listed in the relevant operating manual.
Levelling
If it is necessary to level the
appliance, screw the
adjustable feet into the places
provided on each corner of the
base of the cooker (see
figure).
The legs* fit into the slots on
the underside of the base of
the cooker.
Electrical connection
Fitting the power supp y clable
The cable should be suited to the type of electrical
connection used, according to the following
connection diagram:
To install the power supply cable correctly:
1. Loosen the screw V
in the terminal board
and pull the cover to
open it (see figure).
2. Position the
connection supports A
(see figure) according
to the connection
diagram shown above.
The terminal board is
designed for single-
phase 230 V
connection: terminals 1,
2 and 3 are connected
to each other; jumper 4-
5 is located in the lower
area of the terminal
board.
3. Position the wires N
and $ as shown in the
Installation
HOOD
420
Min.
min.
650
mm. with hood
min.
700
mm. without hood
mm.
600
Min. mm.
420
Min. mm.
V
123
N
A
B
* Only available in certain models.
1 2 345
1 2 3 4 5
12345
RSTN
RSN
RN
400V 3N~
H05RR-F 5x2.5 CEI-UNEL 35363
400V 2N~
H05RR-F 4x4 CEI-UNEL 35363
230V ~
H05RR-F 3x4 CEI-UNEL 35363
GB
3
diagram (see figure) and proceed with the
connection process, tightening the terminal screws
as far as possible.
4. Position the remaining wires on terminals 1-2-3
and tighten the screws.
5. Fix the power supply cable in place by fastening
the cable clamp screw.
6. Close the terminal board cover by tightening the
screws V.
Connecting the supply cable to the mains
Install a standardised plug corresponding to the
load indicated on the appliance data plate (see
Technical data table).
The appliance must be directly connected to the mains
using an omnipolar circuit-breaker with a minimum
contact opening of 3 mm installed between the
appliance and the mains. The circuit-breaker must be
suitable for the charge indicated and must comply with
NFC 15-100 regulations (the earthing wire must not be
interrupted by the circuit-breaker). The supply cable
must be positioned so that it does not come into
contact with temperatures higher than 50°C at any point.
Before connecting the appliance to the power
supply, make sure that:
The appliance is earthed and the plug is compliant
with the law.
The socket can withstand the maximum power of
the appliance, which is indicated by the data
plate.
The voltage is in the range between the values
indicated on the data plate.
The socket is compatible with the plug of the
appliance. If the socket is incompatible with the
plug, ask an authorised technician to replace it.
Do not use extension cords or multiple sockets.
Once the appliance has been installed, the power
supply cable and the electrical socket must be
easily accessible.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced
by authorised technicians only.
The manufacturer declines any liability should
these safety measures not be observed.
* Only available in certain models.
TABLE OF CHARACTERISTSICS
Dimensions
width 44 cm
height 34 cm
depth 38 cm
Volume 54 l
Useful
measurements
relating to the oven
compartment
width 42 cm
height 23 cm
depth 44 cm
Voltage and
frequency see data plate
Ceramic hob
Front Left
Back Left
Back Right
Front Right
Max. ceramic hob
consumption
1200 W
1700 W
1200 W
1700 W
5800 W
ENERGY LABEL
Directive 2002/40/EC on the label of
electric ovens.
Standard EN 50304
Energy consumption for Natural
convection – heating mode:
Convection mode;
Declared energy consumption for
Forced convection Class – heating
mode: Baking mode.
This appliance conforms to the following
European Economic Community
directives: 2006/95/EC dated 12/12/06
(Low Voltage) and subsequent
amendments - 04/108/EEC dated
15/12/04 (Electromagnetic
Compatibility) and subsequent
amendments - 93/68/EEC dated
22/07/93 and subsequent amendments.
2002/96/EEC

Specyfikacje produktu

Marka: Indesit
Kategoria: piekarnik
Model: K3C51.A (W)/U

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Indesit K3C51.A (W)/U, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje piekarnik Indesit

Indesit

Indesit FE10 K Instrukcja

15 Stycznia 2025
Indesit

Indesit k34gwg Instrukcja

15 Stycznia 2025
Indesit

Indesit VL 22 S Instrukcja

13 Stycznia 2025
Indesit

Indesit KDU 3340 IX Instrukcja

12 Stycznia 2025
Indesit

Indesit THP 752 IX/I Instrukcja

30 Grudnia 2025
Indesit

Indesit IS5G0KMX/E Instrukcja

30 Grudnia 2025
Indesit

Indesit IT60V9KMB Instrukcja

10 Grudnia 2024
Indesit

Indesit IT60V9KMW Instrukcja

10 Grudnia 2024
Indesit

Indesit IS67G4PHW Instrukcja

7 Grudnia 2024
Indesit

Indesit IS67G4PHX Instrukcja

7 Grudnia 2024

Instrukcje piekarnik

Najnowsze instrukcje dla piekarnik

Whirlpool

Whirlpool WOI4S8HM1SXA Instrukcja

25 Marca 2025
AEG

AEG NBU5A20SB Instrukcja

24 Marca 2025
AEG

AEG NBU5P40BCK Instrukcja

24 Marca 2025
AEG

AEG TA5PB53WAB Instrukcja

24 Marca 2025
AEG

AEG OU5AE20AK Instrukcja

24 Marca 2025
AEG

AEG TU5AB20SCK Instrukcja

24 Marca 2025
AEG

AEG TB8SB631AB Instrukcja

24 Marca 2025
AEG

AEG TU5PB40NCK Instrukcja

24 Marca 2025
AEG

AEG TU5PB40NSK Instrukcja

24 Marca 2025
AEG

AEG TR6PB531SB Instrukcja

24 Marca 2025