Instrukcja obsługi Iiyama OPC51201CC-1

Iiyama Niesklasyfikowane OPC51201CC-1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Iiyama OPC51201CC-1 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
User Manual
OPS PC Module
ADLPOPS13
(OPC51201xx series)
M239A20
Function Frequency Maximum Output
Power (EIRP)
WiFi
2412-2472 MHz 19.60 dBm
5180-5240 MHz 22.75 dBm
5260-5320 MHz 22.76 dBm
5500-5700 MHz 22.88 dBm
5745-5825MHz 13.67 dBm
5955-6415MHz 21.78 dBm
Bluetooth 2402-2480 MHz 13.39 dBm
BLE 2402-2480 MHz 8.97 dBm
RF&POWER
Before using and operating this device, please read
thoroughly and comply with the following precautions in
order to prevent accidents or mal-operations.
Do not charge or use the device in dusty or wet conditions,
to prevent internal circuit failure.
Keep the device away from heat sources such as an
electric heater.
This device and its parts may contain some small
components, so keep the product out of reach of children to
prevent accidents.
This device is not water-resistant, please keep it dry.
The normal working temperature for the product is
0°C~40°C, and the normal working humidity is 10%~95%.
Please contact professional service personnel for
maintenance services.
Do not insert any sharp or pointed object into the device.
Prevent the device from falls and collisions with other
objects, which may cause damages.
There are heating hole on back cover, do not spray water to
it or use damp cloth for cleaning;
Please call professional personnel for maintenance service.
STATEMENT
The image shown in this manual is indicative only. If there is
inconsistency between the image and the actual product, the
actual product shall govern.
SAFETY WARNING
xx: RAM and SSD size control code
Here, Shenzhen Decenta Technology Co., Ltd. declares
that the OPS PC Module complies with Directive 2014/53/
EU Radio Equipment Directive, 2011/65/EU RoHS Directive,
Radio Equipment Regulation 2017 and The Restriction of
the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012.
The full text of the EU and UK declaration of the conformity is
available at the following internet address: https://iiyama.com
Please refer to https://iiyama.com to download the
User manual and driver.
We recommend recycling of used product.
Please contact your dealer or iiyama service
center. Recycle information is obtained via
the Internet, using the address:
https://iiyama.com
You can access the Web page of di erent
countries from there.
CHECKING THE CONTENTS OF THE PACKAGE
OPS PC Module x 1
Installation manual x 1 (this document)
OPS PC MODULE SPECIFICATION
INSTALLATION PROCEDURE
NOTE Before mounting and using the Monitor, please follow the steps below to install the OPS PC Module.
The installation should be performed by at least two adult persons to avoid danger and injuries.
Please make sure the power cable of the Monitor is disconnected before installation.
Do not plug or unplug the OPS PC Module while the monitor is powered on. OPC PC module may be
broken.
When using for the rst time, if the screen is blurred, ickering, no signal, etc. after booting, OPS
PC Module may not be installed correctly; please check the installation status or reinstall it.
1. Remove OPS PC Module backplane 2. Insert OPS PC Module into the panel slot
Product Speci cation
Type OPS PC Module
CPU Gen12 i5-1240P
RAM DDR4 3200MHz 16GB, Max. 32GB
SSD PCIe 256GB, Max. 1T
Graphics Integrated Intel ®
Iris® Xe Graphics
eligible 80EU
Sound Card Integrated High De nition Audio
Ethernet Card
Integrated 10M/100M/1000M
Adaption Intel I219-LM (vPro ethernet
card)
Wi-Fi
Intel AX210/AX211 + BT5.3
Support 802.11a/b/g/n/ac/ax (Wi 6E)
Speed: 2.4Gbps
Bluetooth 5.3
Operating system Windows 11 IoT Enterprise (SAC)
64Bit
Security Device
Support TPM2.0
I/O Port
Antenna 2
USB2.0 (DC5V, 500mA) 2
USB3.0 (DC5V, 900mA) 2
Thunderbolt 4 (DC5V, 3A)
(Support DP ALT mode) 2
HDMI OUT
(Max resolution 3840 x 2160 60Hz) 1
Audio IN and OUT combo 1
RJ45 1
HDD LED (Running : red LED blinking)
1
I/O Port
POWER LED (Power on : green LED) 1
80 PIN Support
Kensington Lock 1
Power Button 1
Power
Power Requirements 12-19Vdc, 60W
Max Power 95W
Standby Power 0.5W
Physical Speci cation
Dimension 180.0 x 119.0 x 30.0 mm (L x W x H)
Dimension(package) 267.0 x 215.0 x 65.0 mm (L x W x H)
Net Weight 0.75kg
Gross Weight 0.95kg
Environmental Condition
Operation Temperature
0 to 40
Operation Humidity 10% to 95% RH (non condensing)
Storage Temperature
-10 to 50
Storage Humidity 10% to 95% RH (non condensing)
3. Fix the screws or mounting ears and tighten it
4. Press the power button to turn it on and operate like a
regular computer
Please ensure the OPS is inserted
correctly by making sure the Rating-Label
and the fan are facing outwards.


Specyfikacje produktu

Marka: Iiyama
Kategoria: Niesklasyfikowane
Model: OPC51201CC-1

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Iiyama OPC51201CC-1, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Iiyama

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024