Instrukcja obsługi IFM IN512A


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM IN512A (3 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
706181/00 04/2012
UK
Operating instructions
(Ex protection related part) for inductive sensors according to EU
directive 94/9/EC annex VIII (ATEX) group II, equipment category
3D
IN512A
2
Remarks for safe use in hazardous areas
Functions and features
Use in hazardous areas according to the classication
II 3D
(group II, category 3D, apparatus for dust atmosphere).
The requirements of the standards EN 60079-0:2009 and EN 60079-31:2009 are met.
Marking (see unit or technical data sheet):
II 3D Ex tc IIIC T80°C Dc IP67 X
Permissible ambient temperature of the application (proper usage) (see unit or technical
data sheet):
-20°C 60°C Ta
Installation / Set-up
The units must only be installed, connected and set up by qualied staff. The qualied staff
must have knowledge of protection classes, regulations and provisions for apparatus in
hazardous areas.
Check whether the classication (see "Marking" above and marking on the unit) is suitable
for the application.
Installation remarks / Installation
Adhere to the respective national regulations and provisions as well as the relevant
installation regulations.
Avoid electrostatic charging on plastic units and cables.
To avoid electrostatic charging clean the unit with a damp cloth only.
To avoid electrostatic charging steps must be taken to ensure the equalisation of potential
of metal parts (plug housing, xing elements, protective housing, etc.).
Do not mount the unit in the dust ow.
Avoid dust deposits on the units.
Protect the units and the cables efciently against damage.
For the connections and the electrical characteristics please see the unit marking or the
technical data sheet.
Protect the unit (plastic parts) from UV light.
3
UK
Special conditions for safe operation
The unit (1) must only be installed in conjunction with the supplied protective housing (2).
Use the supplied mounting plate (3) to ensure a secure t of the mounting screws (4).
2
4
3
1
1. Proximity sensor
2. Protective housing
3. Mounting plate
4. Mounting screws (supplied with the
unit).
The cable must be rmly xed at the sensor end.
Permissible temperature range
- -5°C, if the cable is moved during operation
- -20°C, if the cable is not moved during operation
The housings are rated for a low mechanical risk and tested with an impact energy of 4
joules.
The sensing face is not designed for mechanical stress. Therefore the unit must only be
operated with target pucks which exclude mechanical stress on the sensing face.
Tightening torque of the mounting screws MA = 1 Nm (±10%).
Maintenance / Repair
The unit must not be modied nor can it be repaired. In case of a fault please contact the
manufacturer.
If required, the technical data sheets and EC declarations of conformity can be obtained
from the manufacturer. Indicate the article number.


Specyfikacje produktu

Marka: IFM
Kategoria: nieskategoryzowany
Model: IN512A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM IN512A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany IFM

IFM

IFM RV6068 Instrukcja

4 Września 2024
IFM

IFM NN5010 Instrukcja

4 Września 2024
IFM

IFM PL1502 Instrukcja

4 Września 2024
IFM

IFM OB5025 Instrukcja

4 Września 2024
IFM

IFM PL1512 Instrukcja

4 Września 2024
IFM

IFM RB6026 Instrukcja

4 Września 2024
IFM

IFM RV6106 Instrukcja

3 Września 2024
IFM

IFM RC6045 Instrukcja

3 Września 2024
IFM

IFM RU6067 Instrukcja

3 Września 2024
IFM

IFM EVC995 Instrukcja

3 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024