Instrukcja obsługi IFM E20892


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM E20892 (1 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Montieren Sie zwei passende Nutsteine (nicht im Lieferumfang) in der Nut des
Aluprofils. Befestigen Sie den Halter (a) mit den beiden Schrauben (b) und schieben
Sie den Gewindewürfel (c) hinein. Drehen Sie die Schraube (d) in den Gewindewürfel
und kontern Sie die Schraube mit der Mutter (e).
Ziehen Sie nach Montage und Ausrichtung des Sensors die Schraube (g) fest.
Befestigen Sie den Haltewinkel (i) und ziehen Sie anschließend die Schraube (g)
soweit an, daß sich der Winkel noch drehen läßt.
Montieren Sie die beiden Schellenlften (f) lose mit Hilfe der beiliegenden Schraube
(g) und Mutter (h).
Montageanleitung Montagesatz OT Aluprofil
Installation instructions mounting kit OT
for aluminium profile
Notice de montage kit de montage OT pour
profil aluminium
701479/00 02/00 ifm electronic gmbh . Friedrichstraße 1 . D 45128 Essen
1
2
3
4
Fasten the two parts of the mounting clamp (f) loosely by means of the screw (g)
and the nut (h) supplied.
Monter les deux parties de la bride de fixation (f) provisoirement à l'aide de la vis
(g) et de l'écrou (h) livrés.
Attach the mounting bracket (i) and then tighten the screw (g) in such a way that
the bracket can still be turned.
Fixer l'équerre de fixation (i) et ensuite visser la vis (g) de façon que l'équerre puisse
toujours être tournée.
Tighten the screw (g) fully after the sensor has been mounted and aligned.
Serrer la vis (g) définitivement après avoir monté et aligné la cellule.
Mount two suitable slot nuts (not supplied) into the slot of the aluminium profile.
Fasten the bracket (a) with the two screws (b) and insert the threaded cube (c). Turn
the screw (d) into the threaded cube and lock it with the nut (e).
Monter deux écrous appropriés (non fournis) dans la rainure du profil aluminium.
Fixer la bride (a) avec les deux vis (b) et inrer le cube file (c). Tourner la vis (d)
dans le cube fileté et la bloquer avec lcrou (e).
(d)
(g)
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(g)


Specyfikacje produktu

Marka: IFM
Kategoria: nieskategoryzowany
Model: E20892

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM E20892, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany IFM

IFM

IFM RV6068 Instrukcja

4 Września 2024
IFM

IFM NN5010 Instrukcja

4 Września 2024
IFM

IFM PL1502 Instrukcja

4 Września 2024
IFM

IFM OB5025 Instrukcja

4 Września 2024
IFM

IFM PL1512 Instrukcja

4 Września 2024
IFM

IFM RB6026 Instrukcja

4 Września 2024
IFM

IFM RV6106 Instrukcja

3 Września 2024
IFM

IFM RC6045 Instrukcja

3 Września 2024
IFM

IFM RU6067 Instrukcja

3 Września 2024
IFM

IFM EVC995 Instrukcja

3 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024