Instrukcja obsługi IFM AL1940


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla IFM AL1940 (11 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
Operating instructions
IO-Link master
AL19xx
11476626/00 08/2022
UK
2
1 Preliminary note
Technical data, approvals, accessories and further information at
www.ifm.com.
2 Safety instructions
The device described is a subcomponent for integration into a system.
- The manufacturer is responsible for the safety of the system.
- The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system. This documentation
must contain all necessary information and safety instructions for the operator,
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system.
Read this document before setting up the product and keep it during the entire
service life.
The product must be suitable for the corresponding applications and
environmental conditions without any restrictions.
Only use the product for its intended purpose (→ Functions and features).
If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur.
The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator.
Installation, electrical connection, set-up, programming, configuration, operation
and maintenance of the product must be carried out by personnel qualified and
authorised for the respective activity.
Protect units and cables against damage.
3 Functions and features
The IO-Link master modules serve as a gateway between intelligent IO-Link
sensors and the field bus. The units with protection rating IP 20 are designed as a
control cabinet module for use in plant construction.
3
UK
4 Symbols used
Instruction
Important note
Non-compliance may result in malfunction or interference.
4.1 Warnings used
WARNING
Warning of serious personal injury.
Death or serious irreversible injuries may result.
4.2 Safety symbols on the device
General warning on the device.
When this symbol appears, consider the corresponding section in the operating
instructions.
5 Installation
Disconnect power before installation.
Mount the unit in a control cabinet with a protection rating of at least IP 54 to
ensure protection against accidental contact with dangerous contact voltages
and against external influence. The control cabinet has to be installed in
accordance with local and national regulations.
Mount the unit vertically on a DIN rail.
Leave enough space between the unit and the top or bottom of the control
cabinet as well as to adjacent devices to enable air circulation and to avoid
inadmissible heating.
5.1 Installation instructions
Electrostatic discharge
The device contains components that can be damaged or destroyed by
electrostatic discharge.
When handling the device, observe the necessary safety precautions against
electrostatic discharge (ESD).
Only operate the device when mounted on a grounded DIN rail.


Specyfikacje produktu

Marka: IFM
Kategoria: nieskategoryzowany
Model: AL1940

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z IFM AL1940, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany IFM

IFM

IFM RV6068 Instrukcja

4 Września 2024
IFM

IFM NN5010 Instrukcja

4 Września 2024
IFM

IFM PL1502 Instrukcja

4 Września 2024
IFM

IFM OB5025 Instrukcja

4 Września 2024
IFM

IFM PL1512 Instrukcja

4 Września 2024
IFM

IFM RB6026 Instrukcja

4 Września 2024
IFM

IFM RV6106 Instrukcja

3 Września 2024
IFM

IFM RC6045 Instrukcja

3 Września 2024
IFM

IFM RU6067 Instrukcja

3 Września 2024
IFM

IFM EVC995 Instrukcja

3 Września 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024