Instrukcja obsługi Ideal HeatSeeker

Ideal nieskategoryzowany HeatSeeker

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ideal HeatSeeker (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 21 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
Getting started
1. Unpack the camera and remove the lens cap.
2. Press the Power switch and allow the camera to calibrate
itself. During this 15-second time period, the screen
may blank out before the thermal image appears.
3. Check the battery icon on the screen and charge unit
if necessary. The charging port is located inside the
camera flap. A full charge takes about 3.5 hours and
provides 6 hours of continuous use with the LED
flashlight on.
4. At this point, the camera should be ready for use with
the following defaults: Units of Measure: °F and Ft.;
Images are focused and aligned at 6’ from camera
lens; Image is blended at 50%; Auto tracking with
dual cursors is On; Voice/Text annotation is On;
Quick Start Guide
HeatSeeker™ Thermal Imager
Door
Screen
Power
Button
Navigation
Keys
F1 F2 F3 F4
™
then press the key, until appears. Then,F2 Visible Off
use the to toggle the feature On. Then,center nav key
use the right/left keys to adjust the image blend.
9. To freeze the image, press the key. If unsatisfiedF3
with the image, press again to release the imageF3
and enter the active measuring mode again. Press F3
to freeze another image.
10. For on-the-job troubleshooting, such as manually
moving the cursor to a specific location on the
camera’s screen to obtain a specific temperature
reading, refer to the full user’s manual saved on the CD.
11. To save the image to the Micro-SD card, press the
Capture button on the top of the camera. Then, record
a voice tag and/or text caption to identify the file when
retrieving it in the software. If these steps are skipped,
the image is still saved but with a generic file name.
12. The camera then returns to live imaging and is ready
to capture a new image.
13. The camera can be turned off by depressing the
power button until the camera shuts down. The
camera stores and uses the last settings upon the
next startup.
The key can be used to enter the menu to changeF4
settings and view saved images onscreen. Refer to the
operating manual to learn the camera’s full capabilities.
Ambient temperature is
set at 72°F; Emissivity is
set for 0.95; Auto Power
Off is set for 20min.
5. To customize the camera
from any of the defaults,
please see the Customizing
the Camera Setup section
further in this guide.
6. Point the camera at the
object of interest, noting that the camera is
focused/aligned at 6’. Ensure your fingers do not
obscure the small visual lens.
7. The dual cursors automatically locate the hottest and
coldest temperatures and displays these temperatures
at the top of the screen along with the temperature.Δ
8. To change the % image blend, hit the right/left
navigation keys. Note that the % refers to the amount
of visual image shown. If these keys are not working,
Capture Button
Thermal Lens Visual Lens
Laser Button
Quick Start Guide: HeatSeeker™ Thermal Imager www.idealindustries.com
Soft Function Keys
a) 100% Thermal
Only b) 100% Visible
Only c) 50% Thermal
& 50% visible
12-3484 HeatSeeker 3-fold R 1/26/09 9:52 AM Page 1
Quick Start Guide: HeatSeeker™ Thermal Imager www.idealindustries.com
Customizing the camera setup
Focusing the thermal image:
1. Determine how far the object to be measured is from
the camera lens.
2. Rotate the black ring around the untilthermal lens
the distance meter that appears on the screen shows
the proper distance. The optimal range is 1.5’ to 15’,
with a max of 30’.
Aligning the visual/thermal images:
1. Press the key until appears on theF2 Visible On/Off
screen. The center navigation key toggles this feature
on and off.
2. Press the key until is displayed.F1 Align Image
3. Press the and note the distance metercenter nav key
that appears on the screen.
4. Press this center nav key repeatedly until the preset
distance (1.5/3/6/12 ft) appears that most closely
matches the distance to which the thermal image
was focused.
5. Use the to make finer alignmentleft/right nav arrows
adjustments. Note that these nav arrows move the
visual image that is behind the thermal image.
Turning on the LED flashlight:
Press the key until appears. Press the centerF2 Light Off
navigation key to toggle the light on and off.
Viewing Captured Images
Captured photos can be viewed on the display or
downloaded to a computer for analysis and report
generation.
The camera can show a thermal image or a visible image
of the scene, or a mixed blend of both. Temperature data
is available on all images, even 100% visible image.
Downloading Images:
1. The images can be downloaded directly from the
camera using the USB cable or by removing the
Micro-SD card from the camera and using a suitable
card reader.
2. to copy theEnsure to use Windows Explorer
complete folders from the SD card to the PC. Do not
use the automatic pop-up wizards to transfer files as
they will not copy all files in the image folder: .BMP
for the thermal/visual image, .IR2 for the temperature
data, and .WMV for the voice recording.
3. Refer to the software manual on the CD for analyzing,
editing, and creating reports.
Align Right Align Left Aligned Image
Selecting Menu Options:
1. Press the key to enter the camera’s menu. Refer toF4
the figure below for a view of main options.
2. Use the to highlight a setting.up/down nav keys
4. Use the left/right nav keys to change a setting.
5. Use the key to exit the menu and save the changes.F4
Measurement
Options
Infrared
Settings
Image
Browser
Camera
Settings
Audio
Settings
Language
Selection
Date & Time
Settings
ND-7110-1

Specyfikacje produktu

Marka: Ideal
Kategoria: nieskategoryzowany
Model: HeatSeeker

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ideal HeatSeeker, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Ideal

Ideal

Ideal 30-072 Instrukcja

21 Czerwca 2024
Ideal

Ideal 31-035 Instrukcja

21 Czerwca 2024
Ideal

Ideal 34-003 Instrukcja

21 Czerwca 2024
Ideal

Ideal 30-793 Instrukcja

21 Czerwca 2024
Ideal

Ideal 34-015 Instrukcja

21 Czerwca 2024
Ideal

Ideal 74-032 Instrukcja

21 Czerwca 2024
Ideal

Ideal 31-055 Instrukcja

21 Czerwca 2024
Ideal

Ideal 74-006 Instrukcja

21 Czerwca 2024
Ideal

Ideal 34-002 Instrukcja

21 Czerwca 2024
Ideal

Ideal 74-019 Instrukcja

21 Czerwca 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024