Instrukcja obsługi ICOM IC-M801E

ICOM odbiornik IC-M801E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ICOM IC-M801E (80 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/80
MF/HF MARINE TRANSCEIVER
iM801 E
INSTRUCTION MANUAL
i
FOREWORD
Thank you for purchasing this Icom product. The IC-
M801E
MF
/
HF MARINE TRANSCEIVER
is designed and
built with Icom’s superior technology and craftsman-
ship. With proper care, this product should provide you
with years of trouble-free operation.
We want to take a couple of moments of your time to
thank you for making the IC-M801E your radio of
choice, and hope you agree with Icom’s philosophy of
“technology first.” Many hours of research and devel-
opment went into the design of your IC-M801E.
D
FEATURES
❍Standard 4
×
8
″
remote controller
❍
Built-in DSC meets ITU Class E requirement
❍12 and 24 V DC versions are available
❍PC connection capability for remote control
IMPORTANT
READ THIS INSTRUCTION MANUAL
CAREFULLY before attempting to operate the
transceiver.
SAVE THIS INSTRUCTION MANUAL. This
manual contains important safety and operating in-
structions for the IC-M801E.
EXPLICIT DEFINITIONS
RWARNING HIGH VOLTAGE! NEVER at-
tach an antenna or internal antenna connector during
transmission. This may result in an electrical shock or
burn.
RWARNING! NEVER connect the transceiver to
an AC outlet directly. This may pose a fire hazard or
result in an electric shock.
RWARNING! NEVER mount the transceiver
main unit overhead. The weight of the unit is approxi-
mately 8.5 kg, but its apparent weight will increase
several fold due to wave shocks or vibration. The unit
must be mounted on a flat hard surface only.
RNEVER connect a power source of more than
15.6 V DC or 31.2 V DC (depending on the transceiver
version). This connection could cause a fire or ruin the
transceiver.
RNEVER place the transceiver where normal oper-
ation of the ship or vehicle may be hindered or where it
could cause bodily injury.
RNEVER let metal, wire or other objects touch any
internal part or connectors on the rear panel of the
transceiver. This may result in an electric shock.
DO NOT use chemical agents such as benzine or al-
cohol when cleaning, as they can damage the trans-
ceiver surface.
During maritime mobile operation, KEEP the trans-
ceiver and handset or microphone as far away as pos-
sible (at least 1 m) from the magnetic navigation com-
pass to prevent erroneous indications.
Use Icom handset or microphones only
(supplied or op-
tional). Other manufacturer’s handset or microphones
have different pin assignments, and connection to the
IC-M801E may damage the transceiver.
AVOID using or placing the transceiver in areas with
temperatures below –15°C or above +55°C.
AVOID placing the transceiver in excessively dusty en-
vironments or in direct sunlight.
AVOID placing the transceiver against walls or putting
anything on top of the transceiver. This will obstruct
heat dissipation.
Place the unit in a secure place to avoid inadvertent
use by children.
BE CAREFUL! The transceiver main unit will become
hot when operating the transceiver continuously for
long periods.
PRECAUTIONS
WORD DEFINITION
R
R
R
R
RWARNING Personal injury, fire hazard or electric
shock may occur.
CAUTION Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No
risk or personal injury, fire or electric
shock.
Icom, Icom Inc. and the are registered trademarks of
Icom Incorporated (Japan) in the United States, the United
Kingdom, Germany, France, Spain, Russia and/or other
countries.
IBM is a registered trademark of International Business Ma-
chines.
ii
When your ship requires assistance, contact other ships and the Coast Guard by sending a distress call using dig-
ital selective calling on an emergency frequency.
IN CASE OF EMERGENCY
When immediate help is needed
qPush and hold [DISTRESS] for 5 sec. until the
short beeps become one long beep, to send the
distress call.
wAfter 8291 kHz is automatically selected (after an
acknowledgement call is received), push and hold
the PTT switch on the handset or microphone and
send the following information.
1. “MAY DAY, MAY DAY, MAY DAY.”
2. “THIS IS……………” (name of ship)
3. “LOCATED AT ……” (ship’s position)
4. Give the reason for the distress call.
5. Explain what assistance you need.
6. Give additional information:
•Ship type
•Ship length
•Ship color
•Number of people on-board
When potential problems exist
qPush [DSC] to select DSC watch mode, if neces-
sary.
wPush [MODE
SET
] to select DSC menu, rotate [CH]
to select “Geographical” then push [ENT].
eFollow the guidance displayed on the LCD (bottom
line), to set up the category, area, traffic and call-
ing frequencies with [CH], [ENT] and keypad.
rPush and hold [CALL] for 1 sec. until the short
beeps become one long beep.
tTransmit the appropriate information using voice.
• DSC equipped ships may monitor your transmission.
FOREWORD................................................i
IMPORTANT .............................................. i
EXPLICIT DEFINITIONS ........................... i
PRECAUTIONS ......................................... i
IN CASE OF EMERGENCY ......................ii
TABLE OF CONTENTS ............................ ii
QUICK REFERENCE............................. I–V
■How to set a Channel/Group .............. I
■Audio output/squelch adjustment ...... II
■Basic voice transmission and
reception ........................................... III
■Receiving a DSC............................... IV
■Transmitting a distress call................ IV
1 OPERATING RULES AND
GUIDELINES......................................... 1
2 PANEL DESCRIPTION .................... 2–7
■Controller (RC-25E) ........................... 2
■Main unit ............................................. 4
■Handset (HS-98) ............................... 5
■LCD screen ....................................... 6
3 SELECTING A CHANNEL/FREQUENCY
........................................................... 8–9
■Selecting a channel ........................... 8
4 RECEIVE AND TRANSMIT .......... 10–12
■Basic voice transmit and receive .... 10
■Function for transmit ........................ 10
■Functions for receive ....................... 11
■FSK operation ................................. 12
5 CHANNEL NAME PROGRAMMING . 13
6 DSC PREPARATION ................... 14–15
■MMSI code programming ................ 14
■Position and time programming ....... 15
7 CALL PROCEDURE .................... 16–28
■Distress call ..................................... 16
■Individual call ................................... 20
■Group call ........................................ 23
■Geographical call ............................. 24
■Semi/Auto (telephone) call .............. 26
■Test call ........................................... 28
8 WHEN RECEIVING A CALL ........ 29–36
■To receive a DSC call ...................... 29
■Received information ....................... 30
■Deleting a memory .......................... 30
■Distress call ..................................... 31
■Distress relay call ............................ 33
■Semi/Auto (telephone) call .............. 34
■Group call ........................................ 35
■Geographical area call .................... 35
■Individual call ................................... 36
9 MEMORY OPERATION ..................... 37
■Memory description ......................... 37
■Memory writing ................................ 37
■Memory reading/transmitting/deleting
......................................................... 37
10 DSC MENU OPERATION ............ 38–41
■General ............................................ 38
■ID input ............................................ 38
■Frequency input ............................... 39
■Verifying self-ID ............................... 40
■Self testing ....................................... 40
■Telephone number input .................. 40
■Memory reading/deleting ................. 41
■Printing out the DSC memory contents
......................................................... 41
11 SET MODE ................................... 42–47
■Quick set mode ............................... 42
■Initial set mode ................................ 43
12 CONNECTION AND INSTALLATION
....................................................... 48–60
■Supplied accessories ...................... 48
■Basic connections ............................49
■Advanced connections .................... 50
■Ground connection .......................... 51
■Power source .................................. 52
■Antenna ........................................... 52
■Mounting .......................................... 53
■Using the optional MB-108 .............. 55
■Using the optional MB-75 ................ 56
■Transceiver dimensions ................... 57
■Fuse replacement ............................ 58
■Connector information ..................... 59
13 FREQUENCY PROGRAMMING .. 61–62
■Frequency selection ........................ 61
■Programming a frequency ............... 62
14 SPECIFICATIONS .............................. 63
15 OPTIONS ........................................... 64
16 TEMPLATE .................................. 65–68
■Remote controller (RC-25E) ............ 65
■Speaker (SP-24E) ........................... 67
ABOUT CE ............................................. 69
TABLE OF CONTENTS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Quick Reference

Specyfikacje produktu

Marka: ICOM
Kategoria: odbiornik
Model: IC-M801E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ICOM IC-M801E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik ICOM

ICOM

ICOM IC-4008E Instrukcja

5 Października 2024
ICOM

ICOM AT-140 Instrukcja

5 Października 2024
ICOM

ICOM IC-25H Instrukcja

5 Października 2024
ICOM

ICOM IC-M120 Instrukcja

29 Września 2024
ICOM

ICOM IC-502A Instrukcja

28 Września 2024
ICOM

ICOM IC-T7H Instrukcja

27 Września 2024
ICOM

ICOM i703 Instrukcja

26 Września 2024
ICOM

ICOM IC-M600E Instrukcja

22 Września 2024
ICOM

ICOM IC-PS25 Instrukcja

20 Września 2024
ICOM

ICOM IC-H12 Instrukcja

20 Września 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

ETON

ETON MA 1 Instrukcja

19 Marca 2025
Elipson

Elipson P1 Instrukcja

14 Marca 2025
Elipson

Elipson Stream S300 Xi Instrukcja

14 Marca 2025
Elipson

Elipson WIIM Mini Instrukcja

14 Marca 2025
KanexPro

KanexPro SP-1X16SL18G Instrukcja

13 Marca 2025
Marshall Electronics

Marshall Electronics VDA-108-3GS Instrukcja

13 Marca 2025
Rega

Rega Brio MK7 Instrukcja

12 Marca 2025
Rexing

Rexing RoadMate CPStream Instrukcja

12 Marca 2025
Mtx Audio

Mtx Audio Thunder TH2500.1 Instrukcja

11 Marca 2025
Mtx Audio

Mtx Audio Thunder TH1500.1 Instrukcja

11 Marca 2025