Instrukcja obsługi Husqvarna Fresia 425


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Husqvarna Fresia 425 (52 stron) w kategorii maszyna do szycia. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/52
K E E P I N G T H E W O R L D S E W I N G
Users Guide
415, 425
Instruction book Freesia 415, 425
2
This houshold sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be
followed, including the following:
Read all instructions before using this household sewing machine.
DANGER - To reduce the risk of electric shock:
A sewing machine should never be left unattended when plugged in. Always unplug
this sewing machine from the electric outlet immediately after using and before
cleaning.
Always unplug before relamping. Replace bulb with same type rated 5 Watt.
WARNING - To reduce the risk of burns, fire, electric
shock, or injury to persons:
Do not allow to be used as a toy. Close attention is necessary when this sewing
machine is used by or near children or infirm persons.
Use this sewing machine only for its intended use as described in this manual. Use
only attachments recommended by the manufacturer as contained in this manual.
Never operate this sewing machine if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped into water. Return
the sewing machine to the nearest authorised dealer or service center for
examination, repair, electrical or mechanical adjustment.
Never operate the sewing machine with any air openings blocked. Keep ventilation
openings of the Sewing machine and foot controller free from the accumulation of
lint, dust, and loose cloth.
Keep fingers away from all moving parts. Special care is required around the Sewing
machine needle.
Always use the proper needle plate. The wrong plate can cause the needle to break.
Do not use bent needles.
Do not pull or push fabric while stitching. It may deflect the needle causing it to break.
Switch the sewing machine off (“0”) when making any adjustment in the needle
area, such as threading needle, changing needle, threading bobbin, or changing
presser foot, etc.
Always unplug the sewing machine from the electrical outlet when removing covers,
lubricating, or when making any other user servicing adjustments mentioned in the
instruction manual.
Never drop or insert any object into any opening.
Do not use outdoors.
Do not operate where aerosol (spray) products are being used or where oxygen is
being administrated.
To disconnect, turn all controls to the off (“0”) position, then remove plug from outlet.
Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
Hold plug when rewinding into cord reel. Do not allow plug to whip when
rewinding.
SAVE THESE INSTRUCTIONS
Instruction book Freesia 415, 425 3
Safety instructions 2
Machine parts 4
Procedures 5-22
Unpacking, Packing away 5
Connecting the foot control 6
Connecting to the power
supply 6
Accessory box, Sewing surface 7
Spool pin 8
Threading the upper thread 9
Threading for twin needles 10
Bobbin winding, Direct
winding 11
Threading lower thread 12
Thread tension, Correct and
incorrect thread tension 13
Presser foot pressure,
Presser foot lever, Changing
the presser foot 14
Changing the needle, Lowering
feed teeth 15
Functions 16-22
Infodisplay, Model 425 16-17
Infodisplay, Model 415 18-19
Stitch selection 20
Memory, Model 425 20
Programming, Model 425 21-22
Mirror image 23
Satin taper and darning
stitches 23
List of contents
Sewing 24-43
Buttonholes, Buttonhole
knife 24-25
Sewing buttons 26
Straight stitch 27
Needle positions 27
Zipper 28
Gathering with straight
stitches 29
Reinforced straight stitches 30
Stretch stitch, Zigzag 30
Lace edging 31
Three-step zigzag 33
Sewing terry cloth 33
Mending and darning 33
Flatlock 34
Hemming 35
Bridging stitch 36
Seam and Overcast 36
Darning stitch 37
Automatic taper stitch 37
Decorative stitches 38
Sewing hints 39
Stitch table, Model 425 40-41
Stitch table, Model 415 42-43
Maintenance 44-45
Changing light bulb 44
Trouble Shooting 46-47
Index 48-49


Specyfikacje produktu

Marka: Husqvarna
Kategoria: maszyna do szycia
Model: Fresia 425

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Husqvarna Fresia 425, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje maszyna do szycia Husqvarna

Instrukcje maszyna do szycia

Najnowsze instrukcje dla maszyna do szycia

Bernina

Bernina 1130 Instrukcja

15 Października 2024
Bernina

Bernina Artista 640 Instrukcja

15 Października 2024
Bernina

Bernina aurora 440 Instrukcja

15 Października 2024
Bernina

Bernina Activa 125 Instrukcja

15 Października 2024
Bernina

Bernina 570 QE Instrukcja

15 Października 2024
Bernina

Bernina 717 Instrukcja

15 Października 2024
Bernina

Bernina B550QE Instrukcja

15 Października 2024
Bernina

Bernina Activa 240 Instrukcja

15 Października 2024
Bernina

Bernina 580 Instrukcja

15 Października 2024
Bernina

Bernina Bernette 15 Instrukcja

15 Października 2024