Instrukcja obsługi Husqvarna 327LDx


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Husqvarna 327LDx (36 stron) w kategorii Podcinacz. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/36
EEEEnnnngggglllliiiisssshhhh
327LS 327LD
X-series
Operator’s manual
Please r
ead the operator’s manual carefully and make sure you understand the instructions
before using the machine.
KEY
T
O SYMBOLS
2
English
Symbols
W
ARNING! Clearing saws,
brushcutters and trimmers can be
dangerous! Careless or incorrect
use can result in serious or fatal
injury to the operator or others. It is
extremely important that you read
and understand the contents of the
operator’s manual.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
A protective helmet where there
is a risk of falling objects
Approved hearing protection
Approved eye protection
Max. speed of output shaft, rpm
Watch out for thrown objects and
ricochets.
The operator of the machine must
ensure, while working, that no
persons or animals come closer
than 15 metres.
Machines fitted with saw blades or
grass blades can be thrown violently
to the side when the blade comes
into contact with a fixed object. This is
called blade thrust. The blade is
capable of amputating an arm or leg.
Always keep people and animals at least 15 metres from
the machine.
Arrows which show limits for handle
positioning.
Always wear approved protective
gloves.
Wear sturdy, non-slip boots.
Only use non-metallic, flexible
cutting attachments, i.e. trimmer
heads with trimmer cord.
Other symbols/decals on the mac
hine refer to
special certification requirements for certain
markets.
The engine is s
witched off by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug
cap must be removed from the spark plug when
assembling, checking and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always
be used.
50FT
15 m
50FT
1
5 m
The engine exhaust from this product
contains chemical known to the State
of California to cause cancer, birth
defects or other reproductive harm.
CONTENTS
English
3
Contents
Note the f
ollowing before
starting:
Please read the oper
ator’s manual carefully.
Maintenance, replacement, or repair of the emission
control devices and system may be performed by any
nonroad engine repair establishment or individual.
The Emissions Compliance Period referred to on the
Emission Compliance label indicates the number of
operating hours for which the engine has been shown to
meet Federal and Californian emissions requirements.
KEY
TO SYMBOLS
Symbols
................................................................ 2
CONTENTS
Contents
............................................................... 3
Note the following before starting: ........................ 3
INTR
ODUCTION
Dear customer!
..................................................... 4
WHA
T IS WHAT?
What is what?
....................................................... 5
GENERAL SAFETY PRECA
UTIONS
Impor
tant .............................................................. 6
Personal protective equipment ............................. 6
Machine
s safety equipment ................................. 7
Cutting equipment ................................................ 9
ASSEMBL
Y
Fitting the loop handle
.......................................... 11
Assembling and dismantling the two-piece shaft
(327LDx) ............................................................... 11
Assembling the cutting equipment ....................... 12
Fitting the trimmer guard and trimmer head ......... 12
FUEL HANDLING
Fuel saf
ety ............................................................ 13
Fuel ...................................................................... 13
Fueling .................................................................. 14
ST
ARTING AND STOPPING
Chec
k before starting ........................................... 15
Starting and stopping ........................................... 15
W
ORKING TECHNIQUES
Gener
al working instructions ................................ 17
MAINTENANCE
Carb
uretor ............................................................ 19
Muffler .................................................................. 19
Cooling system ..................................................... 20
Spark plug ............................................................ 20
Two-piece shaft (327LDx) ..................................... 21
Air filter ................................................................. 21
Maintenance schedule ......................................... 23
TECHNICAL D
ATA
T
echnical data ...................................................... 24
FEDERAL AND CALIFORNIA EMISSIONS
CONTROL WARRANTY STATEMENT
Y
OUR WARRANTY RIGHTS AND OBLIGATIONS 26
!
W
ARNING! Long-term exposure to noise
can result in permanent hearing
impairment. So always use approved
hearing protection.
!
W
ARNING! Under no circumstances may
the design of the machine be modified
without the permission of the
manufacturer. Always use genuine
accessories. Non-authorized
modifications and/or accessories can
result in serious personal injury or the
death of the operator or others.
Your warranty may not cover damage or
liability caused by the use of non-
authorized accessories or replacement
parts.
!
W
ARNING! A clearing saw, brushcutter
or trimmer can be dangerous if used
incorrectly or carelessly, and can cause
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of this
operator’s manual.


Specyfikacje produktu

Marka: Husqvarna
Kategoria: Podcinacz
Model: 327LDx

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Husqvarna 327LDx, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Podcinacz Husqvarna

Husqvarna

Husqvarna 236R Instrukcja

14 Października 2024
Husqvarna

Husqvarna 110iL Instrukcja

9 Października 2024
Husqvarna

Husqvarna 330LK Instrukcja

29 Września 2024
Husqvarna

Husqvarna 325Cx Instrukcja

28 Września 2024
Husqvarna

Husqvarna 136LiL Instrukcja

28 Września 2024
Husqvarna

Husqvarna 243R Instrukcja

28 Września 2024
Husqvarna

Husqvarna 325LDx Instrukcja

28 Września 2024
Husqvarna

Husqvarna 322C Instrukcja

28 Września 2024
Husqvarna

Husqvarna 323C Instrukcja

28 Września 2024
Husqvarna

Husqvarna 325Lx Instrukcja

28 Września 2024

Instrukcje Podcinacz

Najnowsze instrukcje dla Podcinacz

Black & Decker

Black & Decker GL570 Instrukcja

15 Października 2024
RYOBI

RYOBI One+ P20220 Instrukcja

9 Października 2024
Toro

Toro 51434 Instrukcja

8 Października 2024
Toro

Toro 51490 Instrukcja

8 Października 2024
Toro

Toro 51494 Instrukcja

8 Października 2024
Toro

Toro 51498T Instrukcja

8 Października 2024
Toro

Toro 51653 Instrukcja

8 Października 2024
Toro

Toro i51020 Instrukcja

8 Października 2024
Toro

Toro 51480A Instrukcja

8 Października 2024
Toro

Toro 51486 Instrukcja

8 Października 2024