Instrukcja obsługi Hunter HEPAtech

Hunter oczyszczacz powietrza HEPAtech

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hunter HEPAtech (24 stron) w kategorii oczyszczacz powietrza. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

HEPAtech®

Air Purication System

Air Purier Model HEPAtech® Filter Pre-Filters

30057A, 30061 30928 30901

30067A, 30124A 30928 30901

www.hunterfan.com

Model 30067A, 30124AModel 30057A, 30061

ENGLISH

Page 2 ESPAÑOL

Página 9 FRANÇAIS

Page 17

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS AIR

PURIFIER AND SAVE THESE IMPORTANT INSTRUCTIONS

1. This Air Purier is designed for use on a at, level surface and may not

work properly on an uneven surface. ALWAYS place this Air Purier

on a rm, level surface. ALWAYS place the Air Purier at least

six (6) inches away from walls and heat sources such as

stoves, radiators, or heaters.

2. Place the Air Purier in an area that is out of the reach of children.

3. Before using the Air Purier, extend the cord and inspect for any signs of

damage. use the product if the cord has been damaged.DO NOT

4. This product has a polarized plug (one blade is wider than the other) as

a safety feature. This plug will t into a polarized outlet only one way. If

the plug does not t fully into the outlet, reverse the plug. If it still does not

t, contact a qualied electrician. attempt to defeat or override DO NOT

this safety feature.

5. ALWAYS UNPLUG the Air Purier when it is not in operation, while

the lter is being changed, and while it is being cleaned.

6. tilt or move the Air Purier while it is in operation. Shut off DO NOT

and unplug before moving.

7. immerse the Air Purier in water as permanent damage DO NOT

will occur. Refer to and follow the CLEANING AND FILTER

REPLACEMENT instructions.

Introduction

Thank you for purchasing the HEPAtech® Air Purication System from Hunter

Fan Company. You have purchased our latest development in portable Air

Purication Systems. This system has been developed to improve the quality of

the air you breathe.

Our HEPAtech® Air Purication System out performs other air purication

systems by quickly and effectively removing dust, smoke, and pollen particles

as small as .1 microns in size. Room air is pulled in through the front grill and

cleaned across the HEPAtech® lter. Clean air is then released out the top grill

in order to avoid stirring up settled particles.

Using the Ionizer

Using the ionizer improves the quality of air in the room. Negative ions are

released into the air and positively charged dust, smoke, and pollen particles

are attracted to the negative ions. These particles settle out of the air and

can be vacuumed up during normal cleaning. These particles are also more

easily captured by the HEPAtech® lter as they pass through the HEPAtech®

Air Purication System. To ensure the best air circulation in the room, we

recommend that you place your air purier six inches away from any walls.

Tabs for

opening the

front grill

HEPAtech®

Filter

Pre-Filter

Front

Grill

Figure 2 - Model 30067A, 30124A

Figure 3

Hook Tape

Grill Vents

Hook Tape

Front

Grill

Pre-Filter

HEPAtech®

Filter

Buttons for

opening the

front grill

Setting Up Your Air Purier

1. Remove your air purier from the box and take it out of the clear plastic

protective bag.

2. Place your HEPAtech® Air Purier on a rm, at oor.

3. Before turning the Air Purier ‘on,’ open the front grill.

• For Model 30057A, 30061: To release the front grill, press the buttons

on the side until the front grill slides easily over the buttons. (Refer to Figure

1.)

To release the front grill, place your • For Model 30067A, 30124A:

ngers behind the tabs and pull forward. (Refer to Figure 2.)

4. Next, check the HEPAtech

® lter by pressing rmly on all four corners of the

lter to ensure that it is fully inserted into the lter opening.

5. The carbon pre-lter is mounted inside of the front grill with “hook” tape.

Conrm that it covers the grill vents. (Refer to Figure 3.)

6. Place the lter installation reminder sticker on the inside edge of the front

grill. Circle the month and write the year of installation for the pre-lter and

HEPAtech® lter.

7. Replace the lter and front grill. Be sure that the bottom grill tabs are in

position rst, and then push the top of the grill forward until it is closed. The

unit is now ready for normal operation. NOTE: This unit will not operate

unless the door is placed in the correct position.

8. Plug the unit into a 120V electrical outlet.

AIR PURIFIER PARTS

Figure 1 - Model 30057A, 30061

Specyfikacje produktu

Marka:	Hunter
Kategoria:	oczyszczacz powietrza
Model:	HEPAtech
Kolor produktu:	Biały
Odpowiedni dla pomieszczeń o powierzchni do:	- m³
Prędkości:	3
Zdjemowalny filtr:	Tak
Jonizator:	Tak
Tempo oczyszczania powietrza:	- m³/h
Filtr HEPA:	Tak