Instrukcja obsługi HQ Power VDLPROM11

HQ Power Niesklasyfikowane VDLPROM11

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HQ Power VDLPROM11 (24 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

VDLPROM11

DISCO LIGHT KIT

USER MANUAL 3

GEBRUIKERSHANDLEIDING 7

MODE D’EMPLOI 11

MANUAL DEL USUARIO 15

BEDIENUNGSANLEITUNG 19

VDLPROM11

V. 02 01/12/2014 2 ©Velleman nv –

VDLPROM11

V. 02 01/12/2014 3 ©Velleman nv –

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle

could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal

waste; it should be taken to a specialized company for recycling. This device should be returned

to your distributor or to a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing ! Please read the manual thoroughly before bringing this device into HQPower™

service. If the device was damaged in transit, do not install or use it and contact your dealer.

2. Safety Instructions

Keep this device away from children and unauthorized users.

This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety.

Children shall be supervised to ensure that they do not play with the appliance.

Indoor use only. Keep this device away from rain, moisture, splashing and

dripping liquids. Never put objects filled with liquids on top of or close to the device.

Risk of electroshock when opening the cover. Touching live wires can cause life-threatening

electroshocks. Do not disassemble or open the housing yourself. Have the device repaired by

qualified personnel.

Be very careful during the installation: touching live wires can cause life-threatening

electroshocks.

DO NOT disassemble or open the cover under any circumstances. Touching live wires can

cause life-threatening electroshocks.

This luminaire does not have a built-in device to disconnect it from the electric mains. Make

sure to the luminaire before installation or maintenance activities are electrically isolate

performed.

Do not crimp the power cord and protect it against damage.

Warning! If the power cord is damaged, it must be replaced by the manufacturer, its service

agent, or similarly qualified persons in order to avoid any hazard.

Always disconnect mains power when the device is not in use or when servicing or maintenance

activities are performed. Handle the power cord by the plug only.

Caution: Device heats up during use. Never cover the device and keep the ventilation slots free

from dust and obstructions at all times.

The housing might heat up during usage. Keep minimum distances around the device for

sufficient ventilation. Place the device on a flat, heat resistant surface. Do not place the device

on carpets, fabrics…

 Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and

the dealer will not accept responsibility for any ensuing defects or problems.

Specyfikacje produktu

Marka:	HQ Power
Kategoria:	Niesklasyfikowane
Model:	VDLPROM11
Silnik:	Tak
Maksymalne obiążenie:	3 kg
Ciężar silnika:	300 g
Rodzaj kuli dyskotekowej:	Lustro
Kula disco:	Tak
Stroboskop:	Nie
Pinspot:	Tak
Moduł światła:	Nie
Kolorowe koło:	Tak
Ilość kolorów kolorowego koła:	5
Kolory kolorowego koła:	Blue, Purple, Red, Yellow
Ilość kolorów kuli disco:	1
Prędkość obrotowa kolorowego koła:	2.5 RPM
Średnica kuli disco:	300 mm
Średnica kolorowego koła:	220 mm
Prędkość obrotowa silnika:	1.5 RPM
Częstotliwość wejściowa AC stroboskopu:	50 Hz
Napięcie wejściowe AC stroboskopu:	240 V
Napięcie wejściowe AC pinspotu:	240 V
Częstotliwość wejściowa AC pinspota:	50 Hz
Pobór mocy pinspota (typowy):	30 W
Pobór mocy silnika (typowy):	4 W
Częstotliwość wejściowa AC silnika:	50 Hz
Napięcie wejściowe AC silnika:	240 V