Instrukcja obsługi HP PhotoSmart R725

HP Aparat cyfrowy PhotoSmart R725

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HP PhotoSmart R725 (4 stron) w kategorii Aparat cyfrowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
21
1080P HD CCTV Camera
AHD CVBS HDCVI HDTVI
Specifications
Connection diagram
1080P DVR
video out
12V DC
mode swich
1 2
on
ON
21
ON
21
ON
21
ON
HD TVI HD CVI Analog AHD
Thank you for purchasing our product. If there are any questions,
please read this user manual at first, and do not hesitate to contact us.
Note:
This manual may contain some incorrect places, even though it was
published with our carefully proofreading. The news updates will be
added to the next release without notice. Your valuable advice is really
appreciated.
Cautions:
Make sure the power supply is matched with the camera power
input to avoid damage. Neither of the power adapter nor video
cable should not be beyond the longest transportation limit.
Model
Image Sensor
Chipset
Effective Pixels
Lowest illumination
Electronic Shutter
Video System
Video Frame Rate
Video Output
Video Switch
Smart IR Control
Day/Night
WDR
OSD Menu
Other Function
Power Supply
Power Consumption
Working Environment
IR LED
IR Distance
Lens
Transmission Distance
1080P 4-in-1 HD Camera
1/2.7" 2.1 Mega pixels CMOS
AR0230+FH8536
1928(H)×1088 (V)
0.02Lux@ F1.2,AGC ON , 0 Lux with IR（ ）
1/50s~1/60,000s
PAL/NTSC
25/30fps@1920×1080P
1 channel, HDCVI / HDTVI/AHD/CVBS optional
2 bit switch
Support
Auto(ICR) / Color / B/W
D-WDR
Support, coaxial cable control via DVR directly (UTC)
AWB, AGC, BLC
DC12V±10%
< 5W
-30°C~+60°C / Less than 95%RH
24/30/36/48/72 pcs selectable
10/15/20/30/50/80 meters selectable
3.6/6/8/12/16/25 mm selectable
Over 300m via 75-3 coaxial cable
Camera
General
4-in-1
1.Image black/white, roll over
1) check the camera rear mode switch cable, adjust it and
make sure the video output is matched for your DVR.
2) go to the camera menu and change the PAL/NTSC mode.
2.Video signal shows horizontal ribbon disturbed area
1) check the power supply cable , it should not be too long,
or change a high quality power adapter to replace.
2) Make sure the DVR BNC port connected stable and the
DVR housing GND grounded.
3.Camera keep white/black , IR led not working or keep on,
glass cover broken, etc.
1) Call the franchiser to repair. Please do not open or try
repairing it without permission.
power adapter
coaxial cable
OSD Menu Control
Functions brief OSD Menu Control
*
*
*
*
*
*
*
HD CMOS sensor
Within high sensitivity CMOS image sensor, 1080P video
output , very low illumination Prefect image quality emerge
both on day and night environment
4-in-1 Multiply Video modes output
Support 4 HD signals switch output, AHD/HDCVI/HDTVI/
CVBS, easy to use switch cable
OSD menu control up the coaxial cable(UTC)
Camera parameters can be setup via built-in menu. All the
configuration can be changed by back-end DVR directly
up the coax. No need press the cable button
Over 300 meters long distance video signal transportation
Smart IR control, AGC, D-WDR, DNR
Wide range voltage adaptation, Lightning protection
Strong and pretty housing, installations angles can be
adjusted
This series HD camera can support OSD menu coaxial control
by reusing the video cable. It means user can configure,
without menu button, the camera parameters via DVR directly.
( the DVR also should support UTC ) It’s immensely
convenient for site adjustment.
How to enter to the camera menu ?
In general, the DVR must have the coaxial control feature. Go
to the PTZ control window and click the “+ iris -” to call out the
camera menu.
The menu contents is listed as below:
AE: auto image enhancement
WB: white and black balance mode
DAY-NIGHT: day and night switch mode
VIDEO SETTING: video basic parameters, PAL/NTSC, WDR,
DNR adjustment
LANGUAGE: menu language select
RESET: reload factory default
SAVE-EXIT: save all settings and exit menu.
ATW: auto tracking white balance -- default mode
Color: keep color
WB: keep white and black mode
Smart: auto change to color and WB
DNR: digital noise reduce -- reduce the image noise points in
dark environment
WDR: wide dynamic range -- pick up a balance image when
working in back-light environment
Please install this device in appropriate temperature,
-30 - 60 or -22 - 140 , keep away from ℃ ℃ ℉ ℉
corrosive gas and liquid.
Don’t put the camera direct to the sunlight, it is
recommended installing it under a sun shade.
Caution :

Specyfikacje produktu

Marka: HP
Kategoria: Aparat cyfrowy
Model: PhotoSmart R725

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z HP PhotoSmart R725, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Aparat cyfrowy HP

HP

HP PhotoSmart E337 Instrukcja

5 Lipca 2024
HP

HP s520 Instrukcja

5 Lipca 2024
HP

HP PhotoSmart M440 Instrukcja

4 Lipca 2024
HP

HP sb360 Instrukcja

3 Lipca 2024
HP

HP photosmart c500 Instrukcja

3 Lipca 2024
HP

HP Photosmart M305 Instrukcja

3 Lipca 2024
HP

HP M22 Instrukcja

3 Lipca 2024
HP

HP Photosmart 850 Instrukcja

3 Lipca 2024
HP

HP Photosmart M307 Instrukcja

2 Lipca 2024
HP

HP Photosmart M417 Instrukcja

2 Lipca 2024

Instrukcje Aparat cyfrowy

Najnowsze instrukcje dla Aparat cyfrowy

GoPro

GoPro Dive Housing Instrukcja

15 Stycznia 2025
Panasonic

Panasonic lumix dmc tz6eg k Instrukcja

15 Stycznia 2025
Panasonic

Panasonic DMC-S3 Lumix Instrukcja

15 Stycznia 2025
GoPro

GoPro HERO 5 Session Instrukcja

15 Stycznia 2025
GoPro

GoPro Hero 3 White Instrukcja

15 Stycznia 2025
Umax

Umax astra pix 540 Instrukcja

12 Stycznia 2025
Tevion

Tevion SZ 7 Instrukcja

12 Stycznia 2025
Technaxx

Technaxx x11 Instrukcja

12 Stycznia 2025
Polaroid

Polaroid pdc 1075 Instrukcja

11 Stycznia 2025
Technaxx

Technaxx TX-117 Instrukcja

11 Stycznia 2025