Instrukcja obsługi HP G62-120ES
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HP G62-120ES (135 stron) w kategorii laptop. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/135
HP G62 Notebook PC
Maintenance and Service Guide
SUMMARY
This guide is a troubleshooting reference used for maintaining and servicing the computer. It provides
comprehensive information on identifying computer features, components, and spare parts;
troubleshooting computer problems; and performing computer disassembly procedures.
© Copyright 2010 Hewlett-Packard
Development Company, L.P.
ATI and ATI Mobility Radeon are
trademarks of Advanced Micro Devices,
Inc. Bluetooth is a trademark owned by its
proprietor and used by Hewlett-Packard
Company under license. Intel, Arrandale,
and Core are trademarks of Intel
corporation in the U.S. and other countries.
Microsoft and Windows are U.S. registered
trademarks of Microsoft Corporation. SD
Logo is a trademark of its proprietor.
The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.
First Edition: May 2010
Document Part Number: 620650-001
Safety warning notice
WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not
place the computer directly on your lap or obstruct the computer air vents. Use the computer only on
a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft
surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to
contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer
and the AC adapter comply with the user-accessible surface temperature limits defined by the
International Standard for Safety of Information Technology Equipment (IEC 60950).
iii
iv Safety warning notice
MSG revision history
Revision Publication date Description
A October 2010 ●Added newly supported hard drives to spare parts listings in the
following locations: Computer major components on page 17, Mass
storage devices on page 26, Sequential part number listing
on page 29 42, Hard drive on page .
●Added newly supported memory modules to spare parts listings in the
following locations: Computer major components on page 17, Mass
storage devices on page 26, Sequential part number listing
on page on page 29, Memory module 50.
●Added newly supported WLAN modules to spare parts listings in the
following locations: Computer major components on page 17, Mass
storage devices on page 26, Sequential part number listing
on page on page 29, WLAN module 47.
●Added newly supported processors to spare parts listings in the
following locations: Computer major components on page 17, Mass
storage devices on page 26, Sequential part number listing
on page 29, Processor on page 81.
●Added newly supported system boards to spare parts listings in the
following locations: Computer major components on page 17, Mass
storage devices on page 26, Sequential part number listing
on page 29, System board on page 74.
v
vi MSG revision history
Table of contents
1 Product description ........................................................................................................................................ 1
2 External component identification ................................................................................................................ 5
Identifying the hardware ....................................................................................................................... 5
Top components ................................................................................................................................... 6
TouchPad ............................................................................................................................ 6
Lights ................................................................................................................................... 7
Button and speakers ............................................................................................................ 8
Keys ..................................................................................................................................... 9
Display ............................................................................................................................... 10
Right-side components ....................................................................................................................... 11
Left-side components ......................................................................................................................... 12
Bottom components ........................................................................................................................... 13
Wireless antennas .............................................................................................................................. 14
Additional hardware components ....................................................................................................... 15
3 Illustrated parts catalog ............................................................................................................................... 16
Serial number location ........................................................................................................................ 16
Computer major components ............................................................................................................. 17
Display assembly components ........................................................................................................... 23
Plastics Kit .......................................................................................................................................... 25
Mass storage devices ......................................................................................................................... 26
Miscellaneous parts ............................................................................................................................ 28
Sequential part number listing ............................................................................................................ 29
4 Removal and replacement procedures ....................................................................................................... 34
Preliminary replacement requirements ............................................................................................... 34
Tools required .................................................................................................................... 34
Service considerations ....................................................................................................... 34
Plastic parts ....................................................................................................... 34
Cables and connectors ..................................................................................... 35
Drive handling ................................................................................................... 35
Grounding guidelines ......................................................................................................... 36
vii
Electrostatic discharge damage ........................................................................ 36
Packaging and transporting guidelines ............................................. 37
Workstation guidelines ..................................................................... 37
Equipment guidelines ....................................................................... 38
Component replacement procedures ................................................................................................. 39
Serial number .................................................................................................................... 39
Computer feet .................................................................................................................... 40
Battery ............................................................................................................................... 41
Hard drive .......................................................................................................................... 42
Optical drive ....................................................................................................................... 45
WLAN module .................................................................................................................... 47
Memory module ................................................................................................................. 50
............................................................................................................................................ 51
RTC battery ....................................................................................................................... 51
Keyboard ........................................................................................................................... 53
Top cover ........................................................................................................................... 56
Speaker assembly ............................................................................................................. 59
Power button board ........................................................................................................... 61
TouchPad button board ..................................................................................................... 62
Modem module .................................................................................................................. 63
USB board ......................................................................................................................... 65
Power connector ................................................................................................................ 67
Display assembly ............................................................................................................... 68
System board ..................................................................................................................... 74
Fan/heat sink assembly ..................................................................................................... 77
Processor ........................................................................................................................... 81
5 Setup Utility ................................................................................................................................................... 83
Computer Setup in Windows 7 ........................................................................................................... 83
Starting Setup Utility .......................................................................................................... 83
Using Setup Utility ............................................................................................................. 83
Changing the language of Setup Utility ............................................................. 83
Navigating and selecting in Setup Utility ........................................................... 84
Displaying system information .......................................................................... 84
Restoring default settings in Setup Utility .......................................................... 85
Exiting Setup Utility ................. ................................................................ .......... 86
Setup Utility menus ............................................................................................................ 86
Main menu ........................................................................................................ 86
Security menu ................................................................................................... 86
System Configuration menu .............................................................................. 87
Diagnostics menu .............................................................................................. 87
Computer Setup in Linux .................................................................................................................... 88
Starting Computer Setup ................................................................................................... 88
viii
10 Recycling ................................................................................................................................................... 114
Battery .............................................................................................................................................. 114
Display .............................................................................................................................................. 114
Index ................................................................................................................................................................. 121
x
1 Product description
Category Description HP G62 HP G62
UMA Discrete
Product Name Compaq Presario CQ62 Notebook PC √
HP G62 Notebook PC √
Processors Intel Arrandale™ i7–620M Processor (2.66 GHz, 4 MB
total L3 cache, 1066 MHz)—Dual core 35 W
√ √
Intel Arrandale i5–540M Processor (2.53 GHz, 3 MB total
L3 cache, 1066 MHz)—Dual core 35 W
√ √
Intel Arrandale i5–520M Processor (2.4 GHz, 3 MB total
L3 cache, 1066 MHz)—Dual Core 35 W
√ √
Intel Arrandale i5–450M Processor (2.4 GHz, 3 MB total
L3 cache, 1066 MHz)—Dual Core 35 W
√ √
Intel Arrandale i5–430 Processor (2.26 GHz, 3 MB total
L3 cache, 1066 MHz)—Dual Core 35 W
√ √
Intel Arrandale i3–370 Processor (2.4 GHz, 3 MB L3
cache, 1066 MHz)—Dual Core 35 W
√ √
Intel Arrandale i3–350 Processor (2.26 GHz, 3 MB L3
cache, 1066 MHz)—Dual Core 35 W
√ √
Chipset Intel® HM55 Express Chipset √
Graphics Intel HD Graphics Media Accelerator √
ATI Mobility Radeon™ HD5470 with 512 MB dedicated
video memory
√
ATI Mobility Radeon HD 545v with 512 MB for vision
label mapping
√
Support for BD or HD-DVD playback with HD decoder
and DX10 support
√
Panel 39.6-cm (15.6-in) HD LED BrightView (1366 x 768) √ √
16:9 wide aspect ratio √ √
Memory 2 customer-accessible/upgradable SODIMM slots √ √
Supports dual-channel memory DDR3, 1066 MHz √ √
Supports up to 8 GB of system memory √ √
1
Category Description HP G62 HP G62
UMA Discrete
Supports the following configurations:
●4096 MB (2048 MB × 2) √ √
●3072 MB (1024 MB × 1 + 2048 MB × 1) √ √
●2048 MB (2048 MB × 1) √ √
●2048 MB (1024 MB × 2) √ √
Hard drives Supports 9.5-mm, 6.35-cm (2.5-in) SATA hard drive √ √
Customer accessible √ √
Supports the following drives:
●750 GB, 5400 rpm √ √
●640 GB, 5400 rpm √ √
●500 GB, 5400 rpm √ √
●500 GB, 7200 rpm √ √
●320 GB, 5400 rpm √ √
●320 GB, 7200 rpm √ √
●250 GB, 5400 rpm √ √
●250 GB, 7200 rpm √ √
●160 GB, 7200 rpm √ √
Optical drives 12.7-mm (0.50-in) fixed SATA tray load √ √
DVD±RW and CD-RW SuperMulti Double-Layer Combo
Drive with LightScribe
√ √
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti
Double-Layer Drive
√ √
Webcam (select models only) VGA camera, fixed angle with activity light and single
analog microphone
√ √
Microphone Integrated single analog microphone (for models with no
webcam)
√ √
Audio High-definition audio supports Microsoft® premium
requirements with Presario/HP Altec Lansing speakers
√ √
Modem (select models only) 56K V.92 data/fax MDC modem (computer models not
equipped with a modem have a cover over the RJ-11
jack opening)
√ √
Supports all worldwide certification requirements √ √
Ethernet Integrated 10/100 network interface card (NIC) √ √
Integrated wireless local area network (WLAN) options by
way of wireless module:
2 wireless antennas built into display assembly √ √
Support for no-WLAN option √ √
2 Chapter 1 Product description
Category Description HP G62 HP G62
UMA Discrete
Support for the following WLAN formats:
Atheros AR9285 802.11 a/b/g/n 2x2 √ √
Intel WiFi Link 5100 802.11/b/g/n WLAN module √ √
Broadcom 4313 802.11b/g/n 1x1 √ √
Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070
Bluetooth 2.1+EDR Combo adapter (BT3.0+HS ready)
√ √
Ralink RT3090BC4 802.11b/g/n 1x1 WiFi and Bluetooth
2.1+EDR Combo Adapter (BT3.0+HS ready)
√ √
Realtek RTL8191SE 802.11b/g/n 1x1 WiFi Adapter √ √
External media card (select
models only )
Digital Media Slot supporting SD, MMC, MS, MSPro, xD
cards. Supports mini versions of SD, MMC, MS Duo with
adapter, not included
√ √
Ports Audio-in (stereo microphone) √ √
Audio-out (stereo headphone) √ √
High-Definition Multimedia Interface (HDMI) version 1.3
supporting 1080p with High-bandwidth Digital Content
Protection (HDCP) key (select models only)
√ √
Hot plug/unplug with auto-detect √ √
RJ-11 (modem, select models only) √ √
RJ-45 (Ethernet) √ √
USB (Three USB ports; one is an eSATA/USB port) √ √
VGA (Dsub 15-pin) supporting 1600 × 1200 external
resolution at 75 Hz
√ √
Multi-pin AC power √ √
Keyboard/pointing devices 39.62-cm (15.6-in), Full-size keyboard √ √
TouchPad with 2 buttons and 2-way scroll (taps enabled
as default)
√ √
Power requirements 6-cell, 2.20–Ah, 47 Wh battery √ √
6-cell, 2.55–Ah, 55 Wh battery √ √
6-cell, 2.8–Ah, 62 Wh battery √ √
9-cell, 2.8–Ah, 93 Wh battery √ √
65-W AC adapter with localized cable plug support √
90-W AC adapter with localized cable plug support √
Security Kensington Security Lock √ √
Operating system Preinstalled:
Windows 7® Home Premium (32 & 64 bit) √ √
Windows 7 Home Basic (32 & 64 bit) √ √
3
Category Description HP G62 HP G62
UMA Discrete
Free DOS √ √
Serviceability End-user replaceable parts:
AC adapter √ √
Battery (system) √ √
Hard drive √ √
Memory module √ √
Optical drive √ √
Mini-card devices √ √
4 Chapter 1 Product description
2 External component identification
Identifying the hardware
Components included with the computer might vary by region and model. The illustrations in this
chapter identify the standard features on most computer models.
To see a list of hardware installed in the computer:
1. Select Start > My Computer.
2. In the left pane of the System Tasks window, select View system information.
3. Select Hardware tab > Device Manager.
Add hardware or modify computer configurations using Device Manager.
Identifying the hardware 5
Lights
Component Description
(1) TouchPad light ●Off—TouchPad is enabled.
●Amber—TouchPad is disabled.
(2) Caps lock light On—Caps lock is on
(3) Power light ●On—The computer is on.
●Flashing—The computer is in Sleep.
●Off—The computer is off or in Hibernation.
(4) Wireless light ●White—An integrated wireless device, such as a
wireless local area network (WLAN) device and/or a
Bluetooth® device, is on.
●Amber—No wireless devices are detected.
Top components 7
Keys
Component Description
(1) esc key Displays system information when pressed in combination
with the fn key.
(2) Send e-mail key Opens a new e-mail in your default e-mail client.
(3) Media application key Launches CyberLink PowerDVD.
(4) Web browser key Launches default web browser.
(5) Print key Sends the currently-active document to the default printer.
(6) Calculator key Launches the calculator application.
(7) fn key Displays system information when pressed in conjunction
with the esc key.
(8) Windows logo key Displays the Windows Start menu.
(9) Windows applications key Displays a shortcut menu for items where the cursor is
positioned
(10) Action keys Executes frequently-used system actions.
Top components 9
Right-side components
Component Description
(1) Optical drive Reads and writes to optical discs.
(2) USB port Connects an optional USB device.
(3) RJ-11 (modem) jack (select models only) Connects a modem cable.
(4) AC adapter light ●Flashing white—The computer is in Sleep.
●On white—The computer is connected to external power.
●Flashing amber—The computer is charged.
●Off—The computer is not connected to external power.
(5) Power connector Connects an AC adapter.
(6) Security cable slot Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a deterrent,
but it might not prevent the computer from being mishandled
or stolen.
Right-side components 11
Bottom components
Component Description
(1) Battery bay Holds the battery.
(2) Vents (4) Enable airflow to cool internal components.
NOTE: The computer fan starts up automatically to cool
internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.
(3) Battery release latch Releases the battery from the battery bay.
(4) Memory module compartment Contains two memory module slots and, on select
models, the wireless LAN (WLAN) device.
CAUTION: To prevent an unresponsive system, replace
the wireless module only with a wireless module
authorized for use in the computer by the governmental
agency that regulates wireless devices in your country or
region. If you replace the module and then receive a
warning message, remove the module to restore
computer functionality, and then contact technical support
through Help and Support.
(5) Hard drive bay Holds the hard drive.
Bottom components 13
Wireless antennas
At least two antennas send and receive signals from one or more wireless devices. These antennas
are not visible from the outside of the computer.
NOTE: For optimal transmission, keep the areas immediately around the antennas free from
obstructions.
To review the wireless regulatory notices, see to the section of the Regulatory, Safety and
Environmental Notices that applies to your country or region. These notices are located in Help and
Support.
14 Chapter 2 External component identification
Additional hardware components
Component Description
(1) Power cord* Connects an AC adapter to an AC outlet.
(2) AC adapter Converts AC power to DC power.
(3) Battery* Powers the computer when the computer is not plugged into
external power.
*Power cords vary in appearance by country or region.
Additional hardware components 15
3 Illustrated parts catalog
Serial number location
When ordering parts or requesting information, provide the computer serial number and model
number located in the battery bay of the computer.
Component Description
(1) Product name The name affixed to the front of the computer.
(2) Serial number (s/n) An alphanumeric identifier that is unique to each product.
(3) Part number/Product number (p/n) This number provides specific information about the product’s
hardware components. The part number helps a service technician
to determine what components and parts are needed.
(4) Warranty period The duration of the warranty period for the computer.
(5) Model description An alphanumeric identifier used to locate documents, drivers, and
support for the computer.
16 Chapter 3 Illustrated parts catalog
Computer major components
Computer major components 17
Item Description Spare part number
(1) 39.6-cm (15.6-in) High Definition (HD), light-emitting diode (LED) display assembly
for use in:
NOTE: For more information on the display assembly internal component spare part
information, See Display assembly components on page 23.
●HP G62 biscotti computer models 605906-001
●HP G62 silver computer models 605907-001
●HP G62 white computer models 605908-001
●HP G62 matte black computer models 608444-001
●HP G62 red computer models 615423-001
●HP G62 blue computer models 615424-001
(2) Power button board 606008-001
(3) Keyboard (includes keyboard cable) for use in:
●Adriatics 605922-BA1
●Belgium 605922-A41
●Czech Republic 605922-221
●France 605922-051
●Germany 605922-041
●Greece 605922-DJ1
●Hungry 605922-211
●for International use 605922-B31
●Israel 605922-BB1
●Italy 605922-061
●North America 605922–001
●Norway 605922-DH1
●Portugal 605922-131
●Russia 605922-251
●Saudi Arabia 605922-171
●Spain 605922-071
●Switzerland 605922-BG1
●Turkey 605922-141
●United Kingdom 605922-031
(4) Speaker assembly (includes cable) 606007-001
(5) Top cover (includes TouchPad board) for use in:
●Matte black computer models 606004-001
●Biscotti computer models 610567-001
18 Chapter 3 Illustrated parts catalog
Item Description Spare part number
●Silver computer models 610568-001
●White computer models 610569-001
●Red computer models 615433–001
●Blue computer models 615434–001
(6) Fan/heat sink assembly (includes replacement thermal material) for use with:
●UMA systems 606013-001
●Discrete systems 606014-001
Thermal pad 634363–001
(7) Touchpad button board (includes bracket and cable) 606005-001
(8) Modem module (select models only) (for model 1.0 only) 510110–001
(9) RTC battery (includes mounting adhesive) 606015-001
(10) System board (includes replacement thermal material) for use in:
●HD UMA system board with card reader 605903–001
●HD 5470/512 MB discrete system board with card reader 605902-001
●HD 5470/1 GB discrete system board with card reader 608340-001
●HD 5470/ 512 MB discrete system board with card reader (for model 1.1 only) 615381-001
●HD 5470/1 GB discrete system board with card reader (for model 1.1 only) 615382–001
(11) Memory module (1066 MHz, DDR3)
●1 GB 598859-001
●2 GB 598856-001
●4 GB (for model 1.1 only) 599092-001
(12) Hard drive
●750 GB, 5400 rpm 619686–001
●640 GB, 5400 rpm 603785–001
●500 GB, 5400 rpm (for model 1.1 only) 634638-001
●500 GB, 7200 rpm 610583-001
●320 GB, 5400 rpm (for model 1.1 only) 622643-001
●320 GB, 7200 rpm 603783-001
●250 GB, 5400 rpm (for model 1.1 only) 622641-001
●250 GB, 7200 rpm 635225-001
●160 GB, 7200 rpm 615076-001
●Hard Drive Hardware Kit (not illustrated, includes bracket and screws) 605919-001
(13) Processor (includes replacement thermal material)
●Intel Arrandale i5–520M Processor (2.4 GHz, 3 MB total L3 cache, 1066 MHz)—
Dual Core 35 W
594187-001
Computer major components 19
Item Description Spare part number
●Intel Arrandale i5–540M Processor (2.53 GHz, 3 MB total L3 cache, 1066 MHz)—
Dual core 35 W
594188-001
●Intel Arrandale i3–330 Processor (2.13 GHz, 3 MB L3 cache, 1066 MHz)—Dual
Core 35 W (for model 1.0 only)
597622-001
●Intel Arrandale i3–350 Processor (2.26 GHz, 3 MB L3 cache, 1066 MHz)—Dual
Core 35 W
597623-001
●Intel Arrandale i5–430 Processor (2.26 GHz, 3 MB total L3 cache, 1066 MHz)—Dual
Core 35 W
597624-001
●Intel Arrandale i3–370 Processor (2.4 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core
35 W
613584-001
●Intel Arrandale i5–450 Processor (2.4 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core
35 W
613585-001
●Pentium Arrandale P6000 Processor (1.86 GHz, 3 MB L3 cache, 1066 MHz)—Dual
Core 35 W
613586-001
●Pentium Arrandale P6100 Processor (2.0 GHz, 3 MB L3 cache, 1066 MHz)—Dual
Core 35 W (for model 1.1 only)
613587-001
●Intel Arrandale i3–380 Processor (2.53 GHz, 3 MB L3 cache, 1066 MHz)—Dual
Core 35 W (for model 1.1 only)
625823-001
●Intel Arrandale i5–560 Processor (2.66–3.2 GHz, 3 MB L3 cache, 1066 MHz)—Dual
Core 35 W (for model 1.1 only)
625824-001
●Intel Arrandale i5–580 Processor (2.66–3.33 GHz, 3 MB L3 cache, 1066 MHz)—
Dual Core 35 W (for model 1.1 only)
625825-001
●Intel Pentium P6200 Processor (2.13 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core
35 W (for model 1.1 only)
625831-001
●Intel Core i5–460 Processor (2.53 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35
W (for model 1.1 only)
626039-001
(14) Wireless (WLAN) module
●Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter for use in Canada, the Cayman
Islands, Guam, Puerto Rico, the United States, and the US Virgin Islands
580101-001
20 Chapter 3 Illustrated parts catalog
Item Description Spare part number
●Intel WiFi Link 5100 802.11/b/g/n WLAN module for use in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba,
Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados,
Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and
Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina
Faso, Burundi, Cameroon, Canada, Cape Verde, the Cayman Islands, the Central
African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia,
Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic,
East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia,
Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guam, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India,
Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta,
the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia,
Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal,
the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, the People's
Republic of China, Peru, the Philippines, Poland, Portugal, Puerto Rico, the
Republic of Moldova, Romania, Rwanda, Samoa, San Marino, Sao Tome and
Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra
Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa,
South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the
Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan,
Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, the United Arab Emirates, the United Kingdom, Uruguay, the U.S.
Virgin Islands, the United States, Uzbekistan, Vanuatu, Venezuela, Vietnam,
Yemen, Zaire, Zambia, and Zimbabwe
593530–001
●Realtek RTL8191SE 802.11b/g/n 1x1 WiFi Adapter 593533–001
●Broadcom 4313 802.11b/g/n 1x1 WiFi Adapter 593836-001
●Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo adapter
(BT3.0+HS ready) (for model 1.1 only)
600370–001
●Ralink RT3090BC4 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter
(BT3.0+HS ready) (for model 1.1 only)
602992-001
(15) Optical drive (includes optical drive bezel and bracket)
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use
with:
●Matte black computer models 605920-001
●Biscotti computer models 610558-001
●Silver computer models 610559-001
●White computer models 610560-001
●Red computer models 615435–001
●Blue computer models 615436–001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with:
●Matte black computer models 605921-001
●Biscotti computer models 610561-001
●Silver computer models 610562-001
Computer major components 21
Item Description Spare part number
●White computer models 610563-001
●Red computer models 615437–001
●Blue computer models 615438–001
(16) Battery
●6-cell Li-lon, 2.20 Ah, 47 Wh 593553-001
●6-cell Li-lon, 2.55 Ah, 55 Wh 593554-001
(17) Power connector (includes cable) 609154-001
(18) 606011-001USB board
(19) RJ-11 connector included in Cable Kit 606009-001
(20) Bluetooth module (for model 1.0 only) 537921–001
Bluetooth module cable 605904–001
(21) Base enclosure for use with:
●Matte black computer models 606018-001
●Biscotti computer models 610564-001
●Silver computer models 610565-001
●White computer models 610566-001
●Red computer models 615427-001
●Blue computer models 615428-001
Rubber Kit (not illustrated, includes four rubber feet) 606012-001
Plastics Kit 606006-001
(21) ●Hard drive cover
(23) ●Memory module cover
22 Chapter 3 Illustrated parts catalog
Display assembly components
Item Description Spare part number
(1) Display bezel 605913–001
(2) Display bracket (with hinges) 605915-001
(3) 39.6-cm (15.6-in) high definition, Brightview, display panel (includes display panel
cable)
595130-001
(4) Microphone(includes calbe) 606002–001
(5) Webcam module 606001-001
Webcam module cable 605916–001
Display assembly components 23
Item Description Spare part number
(6) Wireless antenna (includes wireless antenna transceivers and cable) 606016-001
(7) Display back cover (includes logo) for use with:
●Matte black computer models 608445-001
●Biscotti computer models 605910-001
●Silver computer models 605911-001
●White computer models 605912-001
●Red computer models 615425-001
●Blue computer models 615426-001
(8) Display hinge covers 606017-001
Display screw kit (not illustrated) 605918-001
Display rubber display kit (not illustrated, includes display bezel rubber screw covers) 605917-001
24 Chapter 3 Illustrated parts catalog
Plastics Kit
Item Description Spare part number
Plastics kit 606006-001
(1) Hard drive bay cover (includes captive screws)
(2) Wireless/memory module mini-card compartment cover (includes captive screw)
Plastics Kit 25
Mass storage devices
Item Description Spare part number
(1) Optical drive (12.7 mm, SATA, fixed, includes bezel and bracket)
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use
with:
●Matte black computer models 605920-001
●Biscotti computer models 610558-001
●Silver computer models 610559-001
●White computer models 610560-001
●Red computer models 615435–001
●Blue computer models 615436–001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with:
●Matte black computer models 605921-001
●Biscotti computer models 610561-001
●Silver computer models 610562-001
●White computer models 610563-001
●Red computer models 615437–001
●Blue computer models 615438–001
(2) Hard drive
●750 GB, 5400 rpm 619686–001
26 Chapter 3 Illustrated parts catalog
Item Description Spare part number
●640 GB, 5400 rpm 603785–001
●500 GB, 5400 rpm (for model 1.1 only) 634638-001
●500 GB, 7200 rpm 610583-001
●320 GB, 5400 rpm (for model 1.1 only) 622643-001
●320 GB, 7200 rpm 603783-001
●250 GB, 5400 rpm (for model 1.1 only) 622641-001
●250 GB, 7200 rpm 6335225-001
●160 GB, 7200 rpm 615076-001
Hard drive hardware kit (not illustrated, includes bracket and screws) 605919-001
Mass storage devices 27
Miscellaneous parts
Description Spare part number
AC adapters
●65-W AC adapter 609939-001
●90-W AC adapter 609940-001
Power cord, AC, 3 wire, black, 1.83-m (for use with both HP G62 and Presario CQ 62 computer models) for use in:
●Denmark 490371-081
●Europe 490371-021
●Israel 490371-BB1
●Italy 490371-061
●North America 430971-001
●South Africa 490371-AR1
●Switzerland 490371-111
●the United Kingdom and Singapore 490371-031
Cable Kit 606009-001
●Optical drive connector cable
●Power button cable
●RJ-11 cable
●TouchPad cable
●USB cable
Screw kit
●Phillips M2.0x3.0 screw
●Phillips M2.5x3.0 screw
●Phillips M2.5x4.0 screw
●Phillips M2.5x5.0 screw
●Phillips M2.5x6.5 screw
606010-001
28 Chapter 3 Illustrated parts catalog
Sequential part number listing
Spare part number Description
490371-001 Power cord for use in North America with HP G62 computer models
490371-021 Power cord for use in Europe with HP G62 computer models
490371-031 Power cord for use in the United Kingdom and Singapore with HP G62 computer models
490371-061 Power cord for use in Italy with HP G62 computer models
490371-081 Power cord for use in Denmark with HP G62 computer models
490371-111 Power cord for use in Switzerland with HP G62 computer models
490371-AR1 Power cord for use in South Africa with HP G62 computer models
490371-BB1 Power cord for use in Israel with HP G62 computer models
510110–001 56K V.92 data/fax modem (select models only) (for model 1.0 only)
537921-001 Bluetooth module (for model 1.0 only)
580101-001 Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter for use in Canada, the Cayman Islands,
Guam, Puerto Rico, the United States, and the US Virgin Islands
587259-011 Intel Arrandale i7–620M Processor (2.66 GHz, 4 MB total L3 cache, 1066 MHz)—Dual core 35
W
593530-001 Intel WiFi Link 5100 802.11/b/g/n WLAN module for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin,
Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands,
Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Canada, Cape Verde, the Cayman Islands,
the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia,
Cyprus, the Czech Republic, Denmark, Djibouti, Republic, East Timor,Dominica, the Dominican
Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France,
French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guatemala, Guam, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Jordan, Kazakhstan,
Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the
Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the
Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua
New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland,
Portugal, Puerto Rico, the Republic of Moldova, Romania, Rwanda, Samoa, San Marino, Sao
Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, the Seychelles, Sierra
Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South
Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines,
Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga,
Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the United Arab
Emirates, the United Kingdom, Uruguay, the U.S. Virgin Islands, the United States, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
593533–001 Realtek RTL8191SE 802.11b/g/n 1x1 WiFi Adapter
593553–001 Battery, 6-cell, 2.20 Ah, 47 Wh
593554-001 Battery, 6-cell, 2.55 Ah, 55 Wh
593836-001 Broadcom 4313 802.11b/g/n 1x1 WiFi Adapter
594187-001 Intel Arrandale i5–520M Processor (2.4 GHz, 3 MB total L3 cache, 1066 MHz)—Dual Core 35
W
Sequential part number listing 29
Spare part number Description
605922–051 Keyboard for use in France (includes keyboard cable)
605922–061 Keyboard for use in Italy (includes keyboard cable)
605922–071 Keyboard for use in Spain (includes keyboard cable)
605922–131 Keyboard for use in Portugal (includes keyboard cable)
605922–141 Keyboard for use in Turkey (includes keyboard cable)
605922–171 Keyboard for use in Saudi Arabia (includes keyboard cable)
605922–211 Keyboard for use in the Hungary (includes keyboard cable)
605922–221 Keyboard for use in Czech Republic (includes keyboard cable)
605922–251 Keyboard for use in Russia (includes keyboard cable)
605922–A41 Keyboard for use in Belgium (includes keyboard cable)
605922–B31 Keyboard for international use (includes keyboard cable)
605922–BA1 Keyboard for use in Adriatics (includes keyboard cable)
605922–BB1 Keyboard for use in Israel (includes keyboard cable)
605922–BG1 Keyboard for use in Switzerland (includes keyboard cable)
605922–DH1 Keyboard for use in Norway (includes keyboard cable)
605922–DJ1 Keyboard for use in Greece (includes keyboard cable)
606001–001 Webcam module
606002–001 Microphone (includes cable)
606003–001 High Definition display panel (includes display panel and backlight cables)
606004–001 Top cover (includes TouchPad board) for use in matte black computer models
606005–001 Touchpad button board (includes bracket and cable)
606006–001 Plastics kit
606007–001 Speaker assembly (includes cable)
606008–001 Power button board
606009–001 Cable kit
606010–001 Screw kit
606011–001 USB board
606012–001 Rubber kit (includes four rubber feet)
606013–001 Fan/heat sink assembly (includes replacement thermal material) for use with UMA systems
606014–001 Fan/heat sink assembly (includes replacement thermal material) for use with discrete systems
606015–001 RTC battery
606016–001 Wireless antenna kit (includes wireless antenna transceivers and cable)
606017–001 Display hinge covers
606018–001 Base enclosure with HDMI card reader for matte black computer models
Sequential part number listing 31
Spare part number Description
608340–001 HD 5470/1 G discrete system board with card reader
608444–001 39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 matte black computer
models
608445–001 Display back cover for use with HP G62 matte black computer models
609154–001 Power connector (includes cable)
609939–001 65-W AC adapter
609940–001 90-W AC adapter
610558–001 DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with
biscotti computer models
610559–001 DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with
silver computer models
610560–001 DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with
white computer models
610561–001 Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with biscotti
computer models
610562–001 Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with silver
computer models
610563–001 Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with white
computer models
610564–001 Base enclosure with HDMI card reader for biscotti computer models
610565–001 Base enclosure with HDMI card reader for silver computer models
610566–001 Base enclosure with HDMI card reader for white computer models
610567–001 Top cover (includes TouchPad board) for use in biscotti computer models
610568–001 Top cover (includes TouchPad board) for use in silver computer models
610569–001 Top cover (includes TouchPad board) for use in white computer models
610583–001 500 GB, 7200 rpm hard drive
613584-001 Intel Arrandale i3–370 Processor (2.4 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W
613585-001 Intel Arrandale i5–450 Processor (2.4 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W
613586-001 Pentium Arrandale P6000 Processor (1.86 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W
613587-001 Pentium Arrandale P6100 Processor (2.0 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W
(for model 1.1 only)
615076–001 160 GB, 7200 rpm hard drive
615381–001 HD 5470/ 512 MB discrete system board with card reader (for model 1.1 only)
615382–001 HD 5470/1 G discrete system board with card reader (for model 1.1 only)
615423–001 39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 red computer models
615424–001 39.6-cm (15.6-in) HD, light-emitting diode display assembly for HP G62 blue computer models
615425–001 Display back cover for use with HP G62 red computer models
615426–001 Display back cover for use with HP G62 blue computer models
32 Chapter 3 Illustrated parts catalog
Spare part number Description
615427–001 Base enclosure with HDMI card reader for red computer models
615428–001 Base enclosure with HDMI card reader for blue computer models
615433–001 Top cover (includes TouchPad board) for use in red computer models
615434–001 Top cover (includes TouchPad board) for use in blue computer models
615435–001 DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with red
computer models
615436–001 DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with blue
computer models
615437–001 Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with red
computer models
615438–001 Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with blue
computer models
619686–001 750 GB, 5400 rpm hard drive
622641–001 250 GB, 5400 rpm hard drive (for model 1.1 only)
622643–001 320 GB, 5400 rpm hard drive (for model 1.1 only)
625823-001 Intel Arrandale i3–380 Processor (2.53 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W (for
model 1.1 only)
625824-001 Intel Arrandale i5–560 Processor (2.66–3.2 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W
(for model 1.1 only)
625825-001 Intel Arrandale i5–580 Processor (2.66–3.33 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35
W (for model 1.1 only)
625831-001 Intel Pentium P6200 Processor (2.13 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W (for
model 1.1 only)
626039-001 Intel Core i5–460 Processor (2.53 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W (for
model 1.1 only)
634363–001 Thermal pads
634638–001 500 GB, 5400 rpm hard drive (for model 1.1 only)
635225–001 250 GB, 7200 rpm hard drive
Sequential part number listing 33
4 Removal and replacement procedures
Preliminary replacement requirements
Tools required
The following tools are needed to complete the removal and replacement procedures:
●Flat-bladed screwdriver
●Magnetic screwdriver
●Phillips P0 and P1 screwdrivers
Service considerations
Before disassembly or assembly procedures, review and adhere to all service considerations.
NOTE: As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance
instructions.
34 Chapter 4 Removal and replacement procedures
Cables and connectors
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations
during the reassembly process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to
unseat or seat the cables during removal and insertion. Handle cables by the connector whenever
possible. In all cases, avoid bending, twisting, or tearing cables. Be sure that cables are routed in
such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex
cables with extreme care; these cables tear easily.
Drive handling
CAUTION: Drives are fragile components that must be handled with care. To prevent damage to
the computer, damage to a drive, or loss of information, observe these precautions:
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the
computer is off or in Hibernation, turn the computer on, and then shut it down through the operating
system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and
be sure that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective
packaging and label the package “FRAGILE.”
Preliminary replacement requirements 35
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure
determine the degree of sensitivity. Networks built into many integrated circuits provide some
protection, but in many cases, ESD contains enough power to alter device parameters or melt
silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage might have occurred.
An electronic device exposed to ESD might not be affected at all and can work perfectly throughout a
normal cycle. Or the device might function normally for a while, then degrade in the internal layers,
reducing its life expectancy.
CAUTION: To prevent damage to the computer when removing or installing internal components,
observe these precautions:
Keep components in their electrostatic-safe containers until you are ready to install them.
Use nonmagnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines
described in this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
The following table shows how humidity affects the electrostatic voltage levels generated by different
activities.
CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event 10% 40% 55%
Walking across carpet 35,000 V 15,000 V 7,500 V
Walking across vinyl floor 12,000 V 5,000 V 3,000 V
Motions of bench worker 6,000 V 800 V 400 V
Removing DIPS from plastic tube 2,000 V 700 V 400 V
Removing DIPS from vinyl tray 11,500 V 4,000 V 2,000 V
Removing DIPS from Styrofoam 14,500 V 5,000 V 3,500 V
Removing bubble pack from PCB 26,500 V 20,000 V 7,000 V
Packing PCBs in foam-lined box 21,000 V 11,000 V 5,000 V
36 Chapter 4 Removal and replacement procedures
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
●To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●Protect ESD-sensitive parts and assemblies with conductive or approved containers or
packaging.
●Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●Place items on a grounded surface before removing items from their containers.
●Always be properly grounded when touching a component or assembly.
●Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive
foam.
●Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that
mechanized equipment used for moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not possible, use an ionizer to dissipate
electric charges.
Workstation guidelines
Follow these grounding workstation guidelines:
●Cover the workstation with approved static-shielding material.
●Use a wrist strap connected to a properly grounded work surface and use properly grounded
tools and equipment.
●Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
●When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe
materials.
●Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and
Styrofoam.
●Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle
these items only at static-free workstations.
●Avoid contact with pins, leads, or circuitry.
●Turn off power and input signals before inserting or removing connectors or test equipment.
Preliminary replacement requirements 37
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
●When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible
straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper
ground, wear a strap snugly against the skin at all times. On grounded mats with banana-plug
connectors, use alligator clips to connect a wrist strap.
●When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps)
can be used at standing workstations and are compatible with most types of shoes or boots. On
conductive floors or dissipative floor mats, use foot straps on both feet with a minimum of one
megohm resistance between the operator and ground. To be effective, the conductive strips
must be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
●Antistatic tape
●Antistatic smocks, aprons, and sleeve protectors
●Conductive bins and other assembly or soldering aids
●Nonconductive foam
●Conductive tabletop workstations with ground cords of one megohm resistance
●Static-dissipative tables or floor mats with hard ties to the ground
●Field service kits
●Static awareness labels
●Material-handling packages
●Nonconductive plastic bags, tubes, or boxes
●Metal tote boxes
●Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
Material Use Voltage protection level
Antistatic plastic Bags 1,500 V
Carbon-loaded plastic Floor mats 7,500 V
Metallized laminate Floor mats 5,000 V
38 Chapter 4 Removal and replacement procedures
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 75 screws, in 12 different sizes, that must be removed, replaced, or loosened
when servicing the computer. Make special note of each screw size and location during removal and
replacement.
Serial number
The serial number label, located in the battery bay of the computer, provides important information
that you may need when contacting technical support.
(1) Product name (4) Warranty period
(2) Serial number (5) Model description (select models)
(3) Product number
Component replacement procedures 39
Computer feet
Description Spare part number
Rubber Feet Kit 606012-001
The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the
locations illustrated below.
40 Chapter 4 Removal and replacement procedures
Battery
Description Spare part number
6 cell, 2.20 Ah, 47 Wh 593553-001
6 cell, 2.55 Ah, 55 Wh 593554-001
Before disassembling the computer:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
Remove the battery:
1. Turn the computer upside down on a flat surface.
2. Slide the battery release latch (1) to release the battery.
3. Pivot the battery (2) upward and lift it out of the computer (3).
To insert the battery, insert the rear edge of the battery into the battery bay and pivot the front edge
downward until the battery is seated. The battery release latch automatically locks the battery into
place.
Component replacement procedures 41
Hard drive
NOTE: The hard drive spare part kit includes a hard drive bracket and hard drive connector. The
hard drive bracket and hard drive connector, as well as the hard drive bracket screws, are also
available in the Hard Drive Hardware Kit.
Description Spare part number
750 GB, 5400 rpm 619686–001
640 GB, 5400 rpm 603785–001
500 GB, 5400 rpm (for models 1.1 only) 634638-001
500 GB, 7200 rpm 610583-001
0 GB, 5400 rpm (for models 1.1 only) 622643-001
320 GB, 7200 rpm 603783-001
0 GB, 5400 rpm (for models 1.1 only) 622641-001
250 GB, 7200 rpm 635225-001
160 GB, 7200 rpm 615076-001
Hard drive hardware kit (not illustrated, includes connector, bracket, and screws) 605919-001
Before removing the hard drive:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
Remove the hard drive:
1. Position the computer with the front toward you.
2. Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the hard drive cover to the
computer.
42 Chapter 4 Removal and replacement procedures
3. Lift the left side of the hard drive cover (2) (3), swing it forward, and remove the cover . The hard
drive cover is included in the plastics kit, spare part number 606006-001.
4. Disconnect the hard drive cable from the system board (1).
5. Use the mylar tab on the hard drive bracket to move the hard drive to the right (2) bracket to lift
the hard drive out (3) of the hard drive bay.
6. To replace the hard drive bracket, remove the four Phillips PM3.0×4.0 screws (1) that secure the
hard drive bracket to the hard drive
Component replacement procedures 43
7. Grasp the two attached Mylar tabs and pull the bracket straight up to remove it from the hard
drive (2).
Reverse this procedure to install the hard drive.
44 Chapter 4 Removal and replacement procedures
Optical drive
NOTE: The optical drive spare part kit includes an optical drive bezel and optical drive bracket.
Description Spare part
number
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe for use with:
●Biscotti computer models 610558-001
●Matte black computer models 605920-001
●Silver computer models 610559-001
●White computer models 610560-001
●Red computer models 615435–001
●Blue computer models 615436–001
Blu-ray ROM with LightScribe DVD±R/RW SuperMulti Double-Layer Drive for use with:
●Biscotti computer models 610561-001
●Matte black computer models 605921-001
●Silver computer models 610562-001
●White computer models 610563-001
●Red computer models 615437–001
●Blue computer models 615438–001
Before removing the optical drive:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the hard drive (see Hard drive on page 42).
Remove the optical drive:
1. Position the computer upside down with the front toward you.
2. Insert a thin tool, such as a screw driver (1), into the release access slot in the hard drive bay.
Component replacement procedures 45
3. Grasp the bezel and slide the optical drive out of the computer (2).
4. To replace the optical drive bracket, position the optical drive with the optical drive bracket
toward you.
5. Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical
drive.
6. Remove the optical drive bracket (2).
Reverse the above procedure to reassemble and install the optical drive.
46 Chapter 4 Removal and replacement procedures
WLAN module
Description Spare part
number
Atheros AR9285 802.11 a/b/g/n 2x2 WiFi adapter 580101-001
Intel WiFi Link 5100 802.11/b/g/n WLAN module 593530-001
Realtek RTL8191SE 802.11b/g/n 1x1 WiFi Adapter 593533-001
Broadcom 4313 802.11b/g/n 1x1 WiFi Adapter 593836-001
Broadcom 4313 802.11b/g/n 1x1 WiFi and 2070 Bluetooth 2.1+EDR Combo adapter (BT3.0+HS ready)
(for model 1.1 only)
600370-001
Ralink RT3090BC4 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter (BT3.0+HS ready)
(for model 1.1 only)
602992-001
Before removing the WLAN module:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
Remove the WLAN module:
1. Turn the computer upside down with the front toward you.
2. Loosen the two Phillips PM2.5×6.0 captive screws (1) that secure the mini-card compartment
cover.
3. Lift the back side of the memory module cover (2)
.
Component replacement procedures 47
4. Lift the cover off the computer (3). The mini-card compartment cover is included in the plastics
kit, spare part number 606006-001.
5. Disconnect the main antenna cable (1) and the auxiliary antenna cable (2) from the wireless
module.
6. Remove the Phillips PM2.0×3.0 screw (3) that secures the WLAN module to the computer. (The
edge of the module opposite the slot rises away from the computer.)
48 Chapter 4 Removal and replacement procedures
7. Remove the WLAN module (4) by pulling it away from the slot at an angle.
CAUTION: To prevent an unresponsive system, replace the wireless module only with a
wireless module authorized for use in the computer by the governmental agency that regulates
wireless devices in your country or region. If you replace the module and then receive a warning
message, remove the module to restore computer functionality, and then contact technical
support through Help and Support.
NOTE: WLAN modules are designed with a notch (5) to prevent incorrect insertion into the
WLAN module slot.
Reverse this procedure to install a WLAN module.
Component replacement procedures 49
6. Remove the module (2) by pulling it away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the
memory module slot.
Reverse this procedure to install a memory module.
RTC battery
Description Spare part number
RTC battery 606015-001
Before removing the RTC battery:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
Remove the RTC battery:
1. Unplug the RTC battery from the system board (1).
2. Use a sharp, non-conductive, tool to release the RTC battery from the adhesive material that
secures the RTC battery to the system board..
Component replacement procedures 51
3. Lift the battery (2) out of the computer.
Reverse this procedure to install the RTC battery.
52 Chapter 4 Removal and replacement procedures
Keyboard
Description Spare part number
For use in Adriatics 605922-BA1
For use in Belgium 605922-A41
For use in the Czech Republic 605922-221
For use in France 605922-051
For use in Germany 605922-041
For use in Greece 605922-DJ1
For use in Hungary 605922-211
For International use 605922-B31
For use in Israel 605922-BB1
For use in Italy 605922-061
For use in North America 605922-001
For use in Norway 605922-DH1
For use in Portugal 605922-131
For use in Russia 605922-251
For use in Saudi Arabia 605922-171
For use in Spain 605922-071
For use in Switzerland 605922-BG1
For use in Turkey 595199-141
For use in the United Kingdom 595199-031
Before removing the keyboard:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the hard drive (see Hard drive on page 42).
6. Remove the WLAN/Memory Module compartment cover (see WLAN module on page 47).
Remove the keyboard:
1. Turn the computer upside down with the front toward you.
Component replacement procedures 53
2. Remove the three Phillips PM2.5×5.0 and three Phillips PM2.5x6.5 screws that secure the
keyboard to the computer.
3. Turn the computer display-side up with the front toward you.
4. Open the computer as far as possible.
5. Release the tabs along the left (1) (2) and right edges of the keyboard using a thin flat-bladed
screwdriver.
6. Lift the rear edge of the keyboard (3) (4), and set the keyboard back towards the display .
54 Chapter 4 Removal and replacement procedures
7. Release the zero insertion force (ZIF) connector (1) to which the keyboard cable is attached and
disconnect the keyboard cable (2) from the system board.
8. Remove the keyboard.
Reverse this procedure to install the keyboard.
Component replacement procedures 55
2. Remove four Phillips PM2.5x3 screws in the battery bay, and remove nine Phillips PM2.5x6.5
screws on the base enclosure. The top cover screws are identified by a triangle icon embossed
on the base enclosure.
3. Turn the computer display-side up with the front toward you.
4. Open the computer as far as possible.
5. Remove the three Phillips PM2.5×6.0 screw that secures the top cover to the computer.
Component replacement procedures 57
6. Release the power button ZIF connector (1), speaker cable (2), touchpad ZIF connector (3), and
touchpad button ZIF connector (4).
7. Lift the rear edge of the top cover (1) until the top cover disengages from the base enclosure.
Remove the top cover (2).
NOTE: The TouchPad is glued to the top cover and is included with the top cover spare part.
Reverse this procedure to install the switch cover.
58 Chapter 4 Removal and replacement procedures
Speaker assembly
Description Spare part number
Speaker assembly (includes cable) 606007-001
Before removing the speaker assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the following components:
a. Hard drive (see Hard drive on page 42)
b. Optical drive (see Optical drive on page 45)
c. Keyboard (see Keyboard on page 53)
d. Top cover (see Top cover on page 56)
Remove the speaker assembly:
1. Turn the top cover upside down.
2. Remove the three Phillips PM2.5×3.0 screws (1) that secure the speaker assembly to the top
cover.
3. Lift up and remove the speakers (2).
Component replacement procedures 59
Reverse this procedure to install the speaker assembly.
60 Chapter 4 Removal and replacement procedures
Power button board
Description Spare part number
Power button board 606008-001
Before removing the power button board:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the following components:
a. Hard drive (see Hard drive on page 42)
b. Optical drive (see Optical drive on page 45)
c. Keyboard (see Keyboard on page 53)
d. Top cover (see Top cover on page 56)
Remove the power button board:
1. Turn the top cover upside down with the rear edge toward you.
2. Remove the Phillips PM2.0×3.0 screw (1) that secures the power button board to the top cover.
3. Lift up and remove the power button board (2).
Reverse this procedure to install the power button board.
Component replacement procedures 61
TouchPad button board
Description Spare part number
Touchpad button board (includes bracket and cable) 606005-001
Before removing the TouchPad button board:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the following components:
a. Hard drive (see Hard drive on page 42)
b. Optical drive (see Optical drive on page 45)
c. Keyboard (see Keyboard on page 53)
d. Top cover (see Top cover on page 56)
Remove the TouchPad button board:
1. Turn the top cover upside down with the front toward you.
2. Remove the four Phillips PM2.0×3.0 screws (1) that secure the TouchPad bracket to the top
cover.
3. Lift up and remove the TouchPad button board bracket (2). The TouchPad button is fused on the
TouchPad button board bracket.
Reverse the above procedure to reassemble and install the TouchPad button board.
62 Chapter 4 Removal and replacement procedures
Modem module
Description Spare part number
56K V.92 data/fax modem (select models only) (for model 1.0 only) 510100-001
Before removing the modem module:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the following components:
a. Hard drive (see Hard drive on page 42)
b. Optical drive (see Optical drive on page 45)
c. Keyboard (see Keyboard on page 53)
d. Top cover (see Top cover on page 56)
Remove the modem module:
1. Turn the computer upright with the front toward you.
2. Remove the two Phillips PM2.0×3.0 screws (1) that secure the modem module to the system
board.
3. Lift up on the front of the modem module (2) to disconnect it from the system board.
Component replacement procedures 63
Reverse the above procedure to install the modem module, and be sure that the connector on the
bottom of the modem module connects firmly into the system board.
64 Chapter 4 Removal and replacement procedures
USB board
Description Spare part number
USB board 606011-001
Before removing the USB board:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the following components:
a. Hard drive (see Hard drive on page 42)
b. Optical drive (see Optical drive on page 45)
c. Keyboard (see Keyboard on page 53)
d. Top cover (see Top cover on page 56)
Remove the USB board:
1. Position the computer upright with the right side toward you.
2. Disconnect the USB board cable (1) from the system board.
3. Remove the Phillips PM2.5×6.0 screw (2) that secures the USB board to the base enclosure.
4. Lift the USB board (3) straight up to remove it from the computer. The USB cable is available
with the cable kit using spare part number 606009-001
Component replacement procedures 65
Reverse this procedure to install the USB board.
66 Chapter 4 Removal and replacement procedures
Display assembly
Description Spare part number
39.6-cm (15.6-in) High Definition (HD), light-emitting diode (LED) display assembly for use in:
●Biscotti computer models 605906-001
●Silver computer models 605907-001
●White computer models 605908-001
●Matte black computer models 608444-001
●Red computer models 615423-001
●Blue computer models 615424-001
Before removing the display assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module
on page 47).
6. Remove the following components:
a. Optical drive (see Optical drive on page 45)
b. Keyboard (see Keyboard on page 53)
c. Top cover (see Top cover on page 56)
Remove the display assembly:
1. Turn the computer display-side up, with the front toward you.
2. Open the display as far as possible.
3. Disconnect the display panel cable (1) and the microphone cable (2) from the system board and
remove it from its routing channel.
4. Pull the antenna cables through the opening in the top cover (3) and disengage the cables from
the clip in the routing channel leading to the display hinge (4).
68 Chapter 4 Removal and replacement procedures
8. To replace any of the display assembly internal components, remove the following screw covers
and screws:
(1) Two mylar screw covers on the display bezel bottom edge
(2) Two Phillips PM2.5×4.0 screws
The display screw covers are included in the display rubber kit, spare part number 605917-001.
9. Flex the inside edge of the top (1), the left and right sides (2) (3), and the bottom of the display
bezel until the bezel disengages from the display back cover.
10. Remove the display bezel (4).
Reverse this procedure to install the display bezel.
11. To replace the webcam module (select models only), lift the webcam module as far from the
display enclosure as the webcam module cable allows.
70 Chapter 4 Removal and replacement procedures
16. Remove the display panel (2) from the display enclosure. The display panel is available using
the spare part number 606003-001.
Reverse this procedure to install the display panel.
17. To replace the display panel brackets, remove the two Phillips PM2.0×3.0 screws (1) that secure
each bracket to the display panel.
18. Remove the display panel brackets (2) from the display panel. The display panel brackets are
available using spare part number 605915-001.
Reverse this procedure to install the display panel brackets.
19. To replace the wireless antenna transceivers, lift up on the silver transceiver (1) and release the
adhesive material from the display cover (2).
72 Chapter 4 Removal and replacement procedures
20. Lift up to remove the antenna transceivers (3). The wireless antenna transceivers with cable is
available using spare part number 606016-001..
Reverse this procedure to install the display wireless antenna transceivers.
Component replacement procedures 73
System board
NOTE: The system board spare part kit includes UMA or discrete graphics subsystem memory and
replacement thermal material.
Description Spare part number
HD UMA system board with card reader 605903-001
HD 5470/512 MB discrete system board with card reader 605902-001
HD 5470/1 GB discrete system board with card reader 608340-001
HD 5470/ 512 MB discrete system board with card reader (for model 1.1 only) 615381-001
HD 5470/1 GB discrete system board with card reader (for model 1.1 only) 615382-001
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●Memory modules (see Memory module on page 50)
●WLAN module (see WLAN module on page 47)
●Modem module (see Modem module on page 63)
Before removing the system board:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the following components:
a. Hard drive (see Hard drive on page 42)
b. Optical drive (see Optical drive on page 45)
c. WLAN module (see WLAN module on page 47)
d. Memory module (see Memory module on page 50)
e. Keyboard (see Keyboard on page 53)
f. Top cover (see Top cover on page 56)
g. Modem module (see Modem module on page 63)
h. Display assembly (see Display assembly on page 68)
74 Chapter 4 Removal and replacement procedures
Remove the following cables from the system board:
●Power connector cable (see Power connector on page 67)
●USB board cable (see USB board on page 65)
Remove the system board:
1. Turn the computer upright with the right side toward you.
2. Remove the four Phillips PM2.5×4.0 (1) screws that secure the system board to the computer.
3. Grasp the right edge (2) of the system board.
4. Lift the system board (3), and pull it away from the base enclosure at an angle.
Reverse this procedure to install the system board.
Component replacement procedures 75
5. To replace the modem module cable, remove the RJ-11 connector cable from the clips (1), and
then lift the connector straight up (2) and out of the computer. The modem module cable is
available with the cable kit using spare part number 606009-001.
Reverse this procedure to install the modem module cable.
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●Fan/heat sink assembly (see Fan/heat sink assembly on page 77)
●Processor (see Processor on page 81)
Reverse the preceding procedure to install the system board.
76 Chapter 4 Removal and replacement procedures
Fan/heat sink assembly
Description Spare part number
Fan/heat sink assembly (includes replacement thermal material) for use only with computer
models with UMA graphics subsystem memory
606013-001
Fan/heat sink assembly (includes replacement thermal material) for use only with computer
models with discrete graphics subsystem memory
606014-001
Thermal pad 634363–001
Before removing the fan/heat sink assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the following components:
a. Hard drive (see Hard drive on page 42)
b. Optical drive (see Optical drive on page 45)
c. Keyboard (see Keyboard on page 53)
d. Top cover (see Top cover on page 56)
e. Display assembly (see Display assembly on page 68)
f. System board (see System board on page 74)
Remove the fan/heat assembly (fan/heat sink appearance may vary):
NOTE: Steps 1 through 4 apply only to computer models equipped with graphics subsystems
having UMA memory.
1. Turn the system board right-side up, with the front toward you.
Component replacement procedures 77
2. Disconnect the fan cable from the system board.
3. Follow the sequence embossed on heat sink to loosen the four Phillips PM2.5×7.0 captive
screws (1) that secure the fan/heat sink assembly to the system board.
NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it might be necessary to move the fan/heat sink
assembly from side to side to detach the assembly.
4. Remove the fan/heat sink assembly (2) by lifting straight up.
NOTE: Steps 5 through 8 apply only to computer models equipped with graphics subsystems
having discrete memory.
1. Turn the system board right-side up, with the front toward you.
78 Chapter 4 Removal and replacement procedures
2. Disconnect the fan cable from the system board.
3. Loosen the two Phillips captive screws (1) and four Phillips spring-loaded captive screws (2) that
secure the fan/heat sink assembly.
NOTE: Due to the adhesive quality of the thermal material located between the fan/heat sink
assembly and system board components, it might be necessary to move the fan/heat sink
assembly from side to side to detach the assembly.
4. Remove the fan/heat sink assembly (3) by lifting straight up.
Reverse this procedure to install the fan/heat sink assembly.
The thermal material must be thoroughly cleaned from the surface of the fan/heat sink assembly (1),
(3) and the processor (2) and video components (4) each time the fan/heat sink assembly is
removed. Thermal pads and thermal paste must be installed on all surfaces before the fan/heat sink
assembly is reinstalled.
Component replacement procedures 79
NOTE: Thermal pads and thermal paste are included with all fan/heat sink assembly, system board,
and processor spare part kits.
The following illustration shows the locations for thermal material on systems with UMA graphics
subsystems.
The thermal material must be thoroughly cleaned from the surface of the fan/heat sink assembly (1)
and (3), and the processor component (2), each time the fan/heat sink assembly is removed. Thermal
pads and thermal paste must be installed on all surfaces before the fan/heat sink assembly is
reinstalled.
The following illustration shows the locations for thermal material on systems with discrete graphics
subsystems.
80 Chapter 4 Removal and replacement procedures
Processor
NOTE: All processor spare part kits include thermal material.
Description Spare part number
Intel Arrandale i5–520M Processor (2.4 GHz, 3 MB total L3 cache, 1066 MHz)—Dual Core 35 W 594187–001
Intel Arrandale i5–540M Processor (2.53 GHz, 3 MB total L3 cache, 1066 MHz)—Dual core 35 W 594188–001
Intel Arrandale i3–330 Processor (2.13 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W (for
model 1.0 only)
597622–001
Intel Arrandale i3–350 Processor (2.26 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W 597623–001
Intel Arrandale i5–430 Processor (2.26 GHz, 3 MB total L3 cache, 1066 MHz)—Dual Core 35 W 597624-001
Intel Arrandale i3–370 Processor (2.4 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W 613584-001
Intel Arrandale i5–450 Processor (2.4 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W 613585-001
Pentium Arrandale P6000 Processor (1.86 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W 613586-001
Pentium Arrandale P6100 Processor (2.0 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W (for
model 1.1 only)
613587-001
Intel Arrandale i3–380 Processor (2.53 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W (for
model 1.1 only)
625823-001
Intel Arrandale i5–560 Processor (2.66–3.2 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W
(for model 1.1 only)
625824-001
Intel Arrandale i5–580 Processor (2.66–3.33 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W
(for model 1.1 only)
625825-001
Intel Pentium P6200 Processor (2.13 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W (for
model 1.1 only)
625831-001
Intel Core i5–460 Processor (2.53 GHz, 3 MB L3 cache, 1066 MHz)—Dual Core 35 W (for model
1.1 only)
626039-001
Before removing the processor:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC
outlet and then disconnecting the AC adapter from the computer.
4. Remove the battery (see Battery on page 41).
5. Remove the following components:
a. Hard drive (see Hard drive on page 42)
b. Optical drive (see Optical drive on page 45)
c. Keyboard (see Keyboard on page 53)
d. Top cover (see Top cover on page 56)
Component replacement procedures 81
e. Display assembly (see Display assembly on page 68)
f. System board (see System board on page 74)
g. Fan/heat sink assembly (see Fan/heat sink assembly on page 77)
Remove the processor:
1. Turn the processor locking screw (1) one-half turn counterclockwise until you hear a click.
2. Lift the processor (2) straight up and remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4)
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
82 Chapter 4 Removal and replacement procedures
5 Setup Utility
Computer Setup in Windows 7
To view the drives installed on the computer, select Start > Computer.
On models with a secondary hard drive (drive D), the optical drive becomes drive E. The next drive
added to the system, such as a new USB drive, is assigned the next available drive letter.
Starting Setup Utility
Setup Utility is a ROM-based ization utility that can information and custom be used even when the
Windows operating system is not working.
The utility reports information abou ides settings for stt the computer and prov artup, security, and
other preferences.
To start Setup Utility:
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for Startup
Menu message displays in the lower-left corner of the screen, press the f10 key.
– or –
1. Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the esc key.
2. When the Startup Menu displays, press the f10 key.
Using Setup Utility
Changing the language of Setup Utility
The following procedure explains how to change the language of Setup Utility. If Setup Utility is not
already running, begin at step 1. If Setup Utility begin at step 2.is already running,
1. Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the f10 key.
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the esc key. When
the Startup Menu displays, press the f10 key.
2. Use the arrow keys to select System Configuration > Language, and then press the enter key.
Computer Setup in Windows 7 83
3. Use the arrow keys to select a language, and then press enter key.
4. When a confirmation prompt with your language selected displays, press the enter key.
5. To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press the enter key.
Changes goes into effect immediately.
Navigating and selecting in Setup Utility
Because Setup Utility is not Windows based, it does not support the TouchPad. Navigation and
selection are by keystroke.
●To choose a menu or a menu item, use the arrow keys.
●To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the
arrow keys or the f5 f6 or keys.
●To select an item, press the enter key.
●To close a text box or return to the menu display, press the esc key.
●To display additional navigation and selection information while Setup Utility is open, press the
f1 key.
Displaying system information
The following procedure explains how to display system information in Setup Utility. If Setup Utility is
not open, begin at step 1. If Setup Utility is open, begin at step 2.
1. Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the f10 key.
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the esc key. When
the Startup Menu displays, press the f10 key.
2. Select the Main menu. System information such as the system time and date, and identification
information about the computer is displayed.
3. To exit Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press the enter key.
84 Chapter 5 Setup Utility
Restoring default settings in Setup Utility
The following procedure explains how to restore Setup Utility default settings. If Setup Utility is not
already running, begin at step 1. If Setup Utility begin at step 2.is already running,
1. Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the f10 key.
– or –
Open Setup Utility by turning on or restarting the computer. When the Press the ESC key for
Startup Menu message displays in the lower-left corner of the screen, press the esc key. When
the Startup Menu displays, press the f10 key.
2. Use the arrow keys to select Exit > Load Setup Defaults, and then press the enter key.
3. When the Setup Confirmation appears, press the enter key.
4. To save your change and exit Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press the enter key.
Setup Utility default settings go into effect when the computer restarts.
NOTE: Password, security, and language settings are not changed when you restore the factory
default settings.
Computer Setup in Windows 7 85
Exiting Setup Utility
You can exit Setup Utility with or without saving changes.
●To exit Setup Utility and save changes from the current session:
If the Setup Utility menus are not displayed, press the esc key to return to the menu display.
Then use the arrow keys to select Exit > Exit Saving Changes, and then press the enter key.
●To exit Setup Utility without saving changes from the current session:
If the Setup Utility menus are not displayed, press the esc key to return to the menu display.
Then use the arrow keys to select Exit > Exit Discarding Changes, and then press the enter
key.
After either choice, the computer restarts in Windows.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
NOTE: Some of the Setup Utility menu items listed in this chapter might not be supported by the
computer.
Main menu
Select To do this
System information ●View and change the system time and date.
●View identification information about the computer.
●View specification information about the processor, memory size,
system BIOS, and keyboard controller version (select models
only).
Security menu
Select To do this
Administrator password Enter, change, or delete an administrator password.
Power-On password Enter, change, or delete a power-on password.
86 Chapter 5 Setup Utility
System Configuration menu
Select To do this
Language Support Change the language of Setup Utility.
Button Sound (select models only) Enable/disable the capacitive button tapping sound.
Virtualization Technology (select models only) Enable/disable the processor Virtualization Technology.
Processor C6 State (select models only) Enable/disable the processor C6 sleep state.
LAN Power Saving (select models only) Enable/disable LAN Power Saving. When enabled, saves power when
the computer is in DC mode.
Card Reader/1394 Power Saving (select models
only)
Enable/disable Card Reader/1394 Power Saving.
Fan Always On Enabled/disable Fan Always On. When enabled, the computer fan will
always be on.
Action Keys Mode Enable/disable Action Keys Mode.
Boot Options Set the following boot options:
●POST hotkey delay (sec.)―Set the delay for the f1 f2 f9, , , f10, f11,
and f12 functions of Setup Utility in intervals of 5 seconds each (0,
5, 10, 15, 20).
●CD-ROM Boot―Enable/disable boot from CD-ROM.
●Floppy Boot Enable/disable boot from diskette.―
●Internal Network Adapter Boot―Enable/disable boot from the
internal network adapter.
●Boot Order―Set the boot order for:
◦Notebook Hard Drive
◦Internal CD/DVD ROM Drive
◦USB Diskette on Key/USB Hard Disk
◦USB CD/DVD ROM Drive
◦USB Floppy
◦Network Adapter
Diagnostics menu
Select To do this
Hard Disk Self Test Run a comprehensive self-test on the hard drive.
NOTE: On models with two hard drives, this menu option is called the
Primary Hard Disk Self Test.
Secondary Hard Disk Self Test (select models
only)
Run a comprehensive self-test on a secondary hard drive.
Memory Test Run a diagnostic test on the system memory.
Computer Setup in Windows 7 87
Computer Setup in Linux
Starting Computer Setup
Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating
system is not working or will not load.
NOTE: Some of the Computer Setup menu items listed in this guide might not be supported by the
computer.
NOTE: Pointing devices are not supported in Computer Setup. Use the keyboard to navigate and
make selections.
NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB
legacy support is enabled.
To start Computer Setup:
1. Turn on or restart the computer.
2. Before the operating system opens and when the F10=ROM Based Setup message displays in
the lower-left corner of the screen, press the f10 key.
Using Computer Setup
Navigating and selecting in Computer Setup
The information and settings in Computer Setup are accessed from the File, Security, Diagnostics,
and System Configuration menus.
1. Open Computer Setup by turning on or restarting the computer, and then pressing the f10 key
when the F10 = ROM Based Setup message appears in the lower-left corner of the screen.
Because Computer Setup is not operating system based, it does not support the TouchPad.
Navigation and selection are by keystroke:
●To choose a menu or a menu item, use the arrow keys.
●To select an item, press the enter key.
●To close open dialog boxes and return to the main Computer Setup screen, press the esc
key.
●To view navigation information, press the f1 key.
●To change the language, press the f2 key.
2. Select the File, Security, Diagnostics, or System Configuration menu.
3. To exit Computer Setup, choose one of the following methods:
●To exit Computer Setup without saving your preferences, use the arrow keys to select File
> Ignore Changes And Exit. Then follow the instructions on the screen.
●To save your preferences and exit Computer Setup, use the arrow keys to select File >
Save Changes And Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
88 Chapter 5 Setup Utility
Computer Setup menus
The menu tables in this section provide an overview of Computer Setup options.
NOTE: Some of the Computer Setup menu items listed in this chapter might not be supported by
the computer.
File menu
Select To do this
System information ●View identification information for the computer.
●View specification information for the processor, cache
and memory size, and system ROM.
Restore Defaults Replace the configuration settings in Computer Setup with
the original factory settings. (Password settings and security
settings are not changed when you restore the factory
settings.)
Ignore Changes And Exit Cancel any changes entered during the current session, and
then exit and restart the computer.
Save Changes And Exit Save any changes entered during the current session, and
then exit and restart the computer. Changes go into effect
when the computer restarts.
90 Chapter 5 Setup Utility
Security menu
NOTE: Some of the menu items listed in this section might not be supported by the computer.
Select To do this
Setup Password Enter, change, or delete a setup password.
Power-On Password Enter, change, or delete a power-on password.
Password Options ●Enable/disable stringent security.
●Enable/disable the password requirement on computer
restart.
DriveLock Passwords ●Enable/disable DriveLock on any computer hard drive.
●Enter, change, or disable DriveLock on an optional
MultiBay hard drive.
NOTE: DriveLock settings are accessible only when you
enter Computer Setup by turning on (not restarting) the
computer.
System IDs Enter a user-defined computer asset tracking number and
ownership tag.
Disk Sanitizer Run Disk Sanitizer to destroy all existing data on the primary
hard drive. The following options are available:
●Fast: Runs the Disk Sanitizer erase cycle once.
●Optimum: Runs the Disk Sanitizer erase cycle 3 times.
●Custom: Allows you to select the desired number of
Disk Sanitizer erase cycles from a list.
CAUTION: If you run Disk Sanitizer, the data on the
primary hard drive is destroyed permanently.
Diagnostics menu
Select To do this
HDD Self-Test Options Run a comprehensive self-test on any hard drive in the
system or on any optional MultiBay hard drive.
Memory Check Run a comprehensive check on system memory.
Computer Setup in Linux 91
Select To do this
Built-in device options ●Enable/disable embedded WLAN Device Radio.
●Enable/disable embedded Bluetooth Device Radio.
●Enable/disable Network Interface Controller (NIC)
●Enable/disable LAN/WLAN Switching.
●Enable/disable Wake on LAN.
●Enable/disable the integrated camera (webcam)
Port options ●Enable/disable USB port.
●Enable/disable ExpressCard slot.
Computer Setup in Linux 93
6 Specifications
Computer specifications
Dimensions
Depth 24.7 cm (9.7 in)
Width 37.4 cm (14.7 in)
Height (front to rear) (1.3 to 1.4 in)3.2 to 3.7 cm
Weight (lowest weight configuration) < 2.25 kg (5.5 lbs)
Input power
Operating voltage 18.5 V dc @ 4.74 A – 90 W
Operating current 4.74 A
Temperature
Operating (not writing to optical disc) 0°C to 35°C (32°F to 95°F)
Operating (writing to optical disc) 5°C to 35°C (41°F to 95°F)
Nonoperating -20°C to 60°C (-4°F to 140°F)
Relative humidity
Operating 10% to 90%
Nonoperating 5% to 95%
Maximum altitude (unpressurized)
Operating -15 m to 3,048 m (-50 ft to 10,000 ft)
Nonoperating -15 m to 12,192 m (-50 ft to 40,000 ft)
NOTE: Applicable product safety standards specify thermal limits for plastic surfaces. The computer operates well within
this range of temperatures.
94 Chapter 6 Specifications
39.6-cm (15.6-in) display specifications
Dimensions
Height 21.0 cm (8.27 in)
Width 35.9 cm (14.1 in)
Diagonal 39.6 cm (15.6)
Number of colors Up to 16.8 million
Contrast ratio 300:1 (typical)
Brightness 200 nits (typical)
Pixel resolution
Pitch 0.259 × 0.259 mm
Format 1280 × 800; HD: 1366 × 768
Configuration RGB vertical stripe
Backlight LED
Character display 80 × 25
Total power consumption 4.0 W
Viewing angle ±40° horizontal, +120/-40° vertical (typical)
39.6-cm (15.6-in) display specifications 95
Hard drive specifications
640 GB* 500 GB* 320 GB* 250 GB* 160 GB*
Dimensions
Height 9.5 mm 9.5 mm 9.5 mm 9.5 mm 9.5 mm
Width 70 mm 70 mm 70 mm 70 mm 70 mm
Weight 101 g 101 g 101 g 101 g 101 g
Interface type SATA SATA SATA SATA SATA
Transfer rate 106 MB/sec 100 MB/sec 100 MB/sec 100 MB/sec 100 MB/sec
Security ATA security ATA security ATA security ATA security ATA security
Seek times (typical read, including setting)
Single track 1.0 ms 1.0 ms 1.5 ms 2.0 ms 1.5 ms
Average 14.0 ms 14.0 ms 12.0 ms 12.0 ms 11.0 ms
Maximum 24.0 ms 22.0 ms 22.0 ms 22.0 ms 22.0 ms
Logical blocks 1,250,26
3,728
976,773,168 625,142,448 488,397,168 312,581,808
Disc rotational speed 5400 rpm 7200 rpm 7200 rpm 7200 rpm 7200 rpm
Operating temperature 5°C to 55°C (41°F to 131°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive
specifications may differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact technical support for details.
96 Chapter 6 Specifications
RJ-11 (modem)
Pin Signal
1 Unused
2 Tip
3 Ring
4 Unused
5 Unused
6 Unused
RJ-45 (network)
Pin Signal
1 Transmit +
2 Transmit -
3 Receive +
4 Unused
5 Unused
6 Receive -
7 Unused
8 Unused
RJ-11 (modem) 109
HDMI
Pin Signal
1 TMDS data 2+
2 TMDS data 2 shield
3 TMDS data 2–
4 TMDS data 1+
5 TMDS data 1shield
6 TMDS data 1–
7 TMDS data 0+
8 TMDS data 0 shield
9 TMDS data 0–
10 TMDS clock+
11 TMDS clock shield
12 TMDS clock–
13 CEC
14 No connect
15 DDC clock
16 DDC data
17 Ground
18 +5V power
19 Hot plug detect
20 Shell
110 Chapter 8 Connector pin assignments
9 Power cord set requirements
The wide range input feature of the computer permits it to operate from any line voltage from 100 to
120 volts AC or from 220 to 240 volts AC.
The 3-conductor power cord set included with the computer meets the requirements for use in the
country or region where the equipment is purchased.
Power cord sets for use in other countries or regions must meet the requirements of the country or
region where the computer is used.
Requirements for all countries or regions
The requirements listed below are applicable to all countries or regions:
●The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
●All power cord sets must be approved by an acceptable accredited agency responsible for
evaluation in the country or region where the power cord set will be used.
●The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage
rating of 125 or 250 V AC, as required by each country or region’s power system.
●The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320
Standard Sheet C13 connector for mating with the appliance inlet on the back of the computer.
112 Chapter 9 Power cord set requirements
Requirements for specific countries or regions
Country/region Accredited agency Applicable note number
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland FIMKO 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan METI 3
The Netherlands KEMA 1
Norway NEMKO 1
The People's Republic of China CCC 5
South Korea EK 4
Sweden SEMKO 1
Switzerland SEV 1
Taiwan BSMI 4
The United Kingdom BSI 1
The United States UL 2
1. The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance
coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region
where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the
Japanese Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall
plug must be a two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
4. The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
5. The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler
and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it
will be used.
Requirements for specific countries or regions 113
10 Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general
household waste. Follow the local laws and regulations in your area for computer battery disposal.
Display
WARNING! The backlight contains mercury. Exercise caution when removing and handling the
backlight to avoid damaging this component and causing exposure to the mercury.
CAUTION: The procedures in this chapter can result in damage to display components. The only
components intended for recycling purposes are the liquid crystal display (LCD) panel and the
backlight. When you remove these components, handle them carefully.
NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display
assembly that might require special handling at end-of-life. Disposal of mercury might be regulated
because of environmental considerations. For disposal or recycling information, contact your local
authorities, or see the Electronic Industries Alliance (EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must
be disassembled to gain access to the backlight (1) and the liquid crystal display (LCD) panel (2).
NOTE: The procedures provided in this chapter are general disassembly instructions. Specific
details, such as screw sizes, quantities, and locations, and component shapes and sizes, can vary
from one computer model to another.
114 Chapter 10 Recycling
Specyfikacje produktu
| Marka: | HP |
| Kategoria: | laptop |
| Model: | G62-120ES |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z HP G62-120ES, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje laptop HP
4 Marca 2025
6 Lutego 2025
12 Stycznia 2025
11 Stycznia 2025
28 Grudnia 2024
27 Grudnia 2024
27 Grudnia 2024
21 Grudnia 2024
21 Grudnia 2024
21 Grudnia 2024
Instrukcje laptop
- laptop Sony
- laptop Samsung
- laptop Fellowes
- laptop LG
- laptop Xiaomi
- laptop Huawei
- laptop Lenovo
- laptop Gigabyte
- laptop Acer
- laptop Fujitsu
- laptop Panasonic
- laptop Viewsonic
- laptop Asus
- laptop Medion
- laptop MSI
- laptop Toshiba
- laptop Haier
- laptop Prixton
- laptop Hyundai
- laptop Honor
- laptop Tripp Lite
- laptop Zebra
- laptop Dell
- laptop Schneider
- laptop Thomson
- laptop Pyle
- laptop Apple
- laptop Razer
- laptop ADATA
- laptop GoClever
- laptop SPC
- laptop NEC
- laptop Oregon Scientific
- laptop Jay-Tech
- laptop Microsoft
- laptop ECS
- laptop XPG
- laptop Denver
- laptop Lexibook
- laptop Micromax
- laptop Odys
- laptop TechBite
- laptop TrekStor
- laptop Alienware
- laptop Airis
- laptop Emachines
- laptop Hähnel
- laptop Sylvania
- laptop Coby
- laptop Evga
- laptop Ricatech
- laptop Mpman
- laptop Vizio
- laptop Targa
- laptop Peaq
- laptop Ematic
- laptop Hannspree
- laptop Inovia
- laptop Ibm
- laptop Atdec
- laptop Packard Bell
- laptop Compaq
- laptop SIIG
- laptop Hercules
- laptop Kogan
- laptop Getac
- laptop Vulcan
- laptop System76
- laptop General Dynamics Itronix
- laptop CTL
- laptop Everex
- laptop Olidata
- laptop Dynabook
- laptop Hamilton Buhl
- laptop AORUS
- laptop Humanscale
- laptop Aplic
- laptop Schenker
Najnowsze instrukcje dla laptop
11 Lutego 2025
11 Lutego 2025
10 Lutego 2025
6 Lutego 2025
31 Stycznia 2025
15 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025