Instrukcja obsługi HP Designjet HD Pro Scanner

HP drukarka Designjet HD Pro Scanner

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla HP Designjet HD Pro Scanner (41 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/41
HP Designjet HD Pro Scanner – MFP
Introductory information
HP Designjet HD Pro Scanneur – MFP
Introduction - informations
HP Designjet HD Pro Scanner – MFP
Einführende Informationen
HP Designjet HD Pro Scanner – MFP
Informazioni preliminari
HP Designjet HD Pro Escáner – MFP
Información preliminar
HP Designjet HD Pro Scanner – MFP
Informações iniciais
EN
FR
DE
ES
IT
PT
Designjet HD Pro Scanner – MFP
HP cares about the environment
USB 2.0 high-speed certified
Introductory Information
3
Introductory Information
Other sources of information
The User’s Guide for your scanner is available at . The http://www.hp.com/go/designjethdproscanner/manuals
guide provides information on the following topics:
• How to copy
• How to scan
• How to print
• How to manage les
• How to use copy options and tools
• How to customize the copy tools
• How to maintain and recover the system
• How to set up the system
• How to scan and copy thick media
• Troubleshoot scanner hardware problems
• Troubleshoot scanner software problems
• Troubleshoot touch screen problems
• Troubleshoot printing problems
• About the scanner hardware
• About the scanner software
• About copy and layout features and options
• About media
• About HP support
• About HP Designjet Online
Legal notices
© Copyright 201 Hewlett-Packard Development Company, L.P.5
The information contained herein is subject to change without notice. The only warranties for HP Products and services
are set forth in the express warranty statement accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions
contained herein.
EN
The HP Designjet D Pro Scanner - MFP is available in selected countries H
only. Please contact HP to check availability in your country.
Introductory Information
4
Scanner software
The scanner software is installed in the scanner’s panel PC touch screen, and runs automatically when you switch on the
panel PC touch screen. The rst screen that you see is divided into three main sections:
• The viewing section on the left, for previewing scanned images; with nine buttons above it that can be used to change
the preview
• The control section on the right, with four tabs containing options for Copy, Scan, Print and Setup tasks
• The toolbar on the bottom, with nine buttons that are described below
The Quit button shuts down the touch screen.
The Online Help button provides information on the use of the scanner.
The File Manager button opens the File Management dialog box.
The Print Queue button accesses the print queue.
The Collate button groups copies into sets.
The Preview button scans the document to preview the image and select an area of interest.
The Reset button resets settings to default values.
The Stop button cancels the current scanner activity.
The Copy button (in the Copy tab) starts copying. In the Scan tab, the Copy button starts scanning.
The Save button (in the Scan tab) saves scanned pdf les.
The Print button (seen in the Print tab) starts printing.
Create a media prole
To create a media prole your printer must be connected to a network.
You can create a media prole only for a paper type that is currently loaded in the printer installed through the network.
The media prole list includes the paper types with existing media proles and also the paper types currently loaded in
the printer (the latter shown with an asterisk). You can select one of the paper types loaded in the printer and create a
media prole as described below if it is not already created. You cannot change the names of the media proles.
In order to print, you must rst create a media prole, and you must have at least one printer connected to the scanner
over a network.
1. Check that the media prole you intend to create does not already exist in the media prole list. If the media prole
you want to create already exists, you must delete the existing one rst before you can install it again.
2. Clean and calibrate the scanner, unless that has already been done recently. See “Scanner calibration” on page 7.
3. Start media prole creation by selecting the Setup tab.
4. Press the Media Prole button, and then press the Tool button. (Alternatively: Printer Tool > > Media Prole).

Specyfikacje produktu

Marka: HP
Kategoria: drukarka
Model: Designjet HD Pro Scanner

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z HP Designjet HD Pro Scanner, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje drukarka HP

HP

HP HP Envy 4525 Instrukcja

15 Stycznia 2025
HP

HP OfficeJet 8014 Instrukcja

15 Stycznia 2025
HP

HP Photosmart 5521 Instrukcja

14 Stycznia 2025
HP

HP Officejet 4654 Instrukcja

12 Stycznia 2025
HP

HP ENVY 6120e Instrukcja

9 Stycznia 2025
HP

HP Smart Tank 5105 All-in-One Instrukcja

30 Grudnia 2025
HP

HP ENVY 4500 e-All-in-One Instrukcja

21 Grudnia 2024
HP

HP Jet Fusion 3D 3200 Instrukcja

6 Grudnia 2024
HP

HP LaserJet M681 MFP Instrukcja

6 Grudnia 2024
HP

HP Deskjet Ink Advantage 2520hc Instrukcja

6 Grudnia 2024

Instrukcje drukarka

Najnowsze instrukcje dla drukarka

Canon

Canon i-Sensys MF645Cx Instrukcja

15 Stycznia 2025
Kodak

Kodak ESP3260 Instrukcja

15 Stycznia 2025
Kodak

Kodak ESP 3200 series Instrukcja

15 Stycznia 2025
Toshiba

Toshiba e-STUDIO 855 Instrukcja

14 Stycznia 2025
Canon

Canon imageRUNNER ADVANCE C3520i Instrukcja

13 Stycznia 2025
Canon

Canon imageRUNNER C624 Instrukcja

13 Stycznia 2025
Brother

Brother DCP-T436W Instrukcja

13 Stycznia 2025
HiTi

HiTi P510S Instrukcja

12 Stycznia 2025
Triumph-Adler

Triumph-Adler LP 4140 Instrukcja

11 Stycznia 2025
Lexmark

Lexmark CX421 Instrukcja

11 Stycznia 2025