Instrukcja obsługi Hotpoint NLLCD 1165 WD ADW UK

Hotpoint pralka NLLCD 1165 WD ADW UK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Hotpoint NLLCD 1165 WD ADW UK (8 stron) w kategorii pralka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

Quick Guide

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.

To receive more comprehensive assistance, register the

appliance on

www.hotpoint.eu/register

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more

detailed instructions on how to remove them, see the Installation Guide.

CONTROL PANEL

WASH CYCLE TABLE

For all testing institutes:

2) Long cotton cycle: set wash cycle with a temperature of 40°C. 3

3) Long synthetics cycle: set wash cycle with a temperature of 40°C.4

* By selecting the cycle and excluding the spin cycle, the washing machine will drain only. 14

** The duration of the wash cycles can be checked on the display.

The cycle duration indicated on the display or instruction manual is an estimate based on

standard conditions. The actual duration may vary in relation to several factors, such as

the temperature and pressure of the incoming water, ambient temperature, amount of

detergent, load quantity and type, load balancing and any additional options selected.

1) Test wash cycle in compliance with regulation 1061/2010:

This cycle is designed for normally soiled cotton loads and is the most ecient in terms of

both electricity and water consumption; it should be used for garments washable at 60°C or

at 40°C. The actual washing temperature may dier from the indicated value.

1. REMOTE CONTROL button

2. UP / DOWN buttons

3. ON/OFF button

4. ACTIVE CARE button and indicator light

5. START/PAUSE button

6. CONFIRM / KEY LOCK button

7. START DELAY button

8. SPIN button

9. TEMPERATURE button

10. OPTIONS / SETTINGS button

11. STEAM HYGIENE/FAVOURITES button

12. WASH CYCLE SELECTOR KNOB

13. Programme Key

Maximum load 11 kg

Power input in o mode 0.5 W / in left-on mode 8 W

Active

Care

Add

Gar-

ments

( )

Detergents and

Additives

Recommended

detergent

Residual damp-

ness %

Energy consump-

tion kWh

Total water l

Wash cycle Temperature Max.

spin speed

(rpm)

Max.

load

(kg)

Duration

(min-

utes)

Pre-

wash Wash Fabric

softener Powder Liquid

Default Range 1 2 3

1 Mixed 40°C - 40°C 1600 11 **      ––––

2 Eco Cotton (1) 60°C 60°C 1600 11 360 ––    43 1,13 62,5

40°C 1600 11 350 ––    43 1,13 62,5

3 Cotton (2) 40°C - 60°C 1600 11 250 ––    43 1,13 102

4 Synthetics (3) 40°C - 60°C 1200 5,5 175 –      53 0,83 56

5 Delicates 40°C - 40°C 1000 5,5 **   –  ––––

6 Wool 40°C - 40°C 800 2,5 ** – –  ––––

7 Anti Allergy 60°C 40°C - 60°C 1600 5,5 ** – –    –––

8 Anti Stain 40° 40°C - 40°C 1000 5,5 **   –    –––

9 White 40°C - 90°C 1600 11 **        –––

10 Steam Refresh – – – 2 ** – – – – – – – – – –

11 Rapid 30 min 30°C - 30°C 800 5,5 **   –  –– – –

12 Specials

• Bed & Bath 60°C - 60°C 1600 11 **   –    – – –

• Shirts 40°C - 40°C 600 2 ** – –  –– – –

• Business 30°C - 30°C 400 2 ** ––  –– – –

• Baby 40°C - 40°C 800 4 ** – –  –– – –

• Duvet 30°C - 30°C 1000 3,5 ** ––  –– – –

• Silk & Curtains 30°C - 30°C – 1 ** – –  –– – –

• Jeans 40°C - 40°C 800 4 ** ––  –– – –

• Rapid 15 min 30°C - 30°C 800 4,5 ** – –  –– – –

• Fitness 30°C - 30°C 600 4 ** ––  –– – –

• Cuddly toys 30°C - 30°C – 1 ** ––– – – – –

13 Favourites: allows for any wash cycle to be stored.

14 Spin & Drain * – – 1600 11 ** – – – – – – – – – –

15 Rinse & Spin – – 1600 11 ** – – – – – – – – –

  Required dosage Optional dosage

! Turning the knob to position allows for accessing the menu from which to set additional 12

washing programmes.

1 2 3

5678911 10

1213

DISPLAY

! The “Programme key” situated inside the detergent dispenser shows all the

available wash cycles together with a graphic guide on how to use the

individual dispenser compartments.

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash

care label. The value indicated in the symbol is the maximum

recommended temperature for washing the garment.

Mixed

For washing lightly to normally soiled resilient garments in cotton, linen,

synthetic bres and mixed bres.

Eco Cotton 60°/40°

Suitable for washing moderately soiled cotton garments. At 40°C and

60°C it is the standard cycle for washing cotton garments, and is the most

ecient in terms of combined water and electricity consumption.

Cotton

Normally to heavily soiled and robust cottons .

Synthetics

Suitable for washing moderately soiled garments made of synthetic bres

(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton bres.

Delicates

For washing very delicate garments. It is advisable to turn the garments

inside out before washing them. For best results, use liquid detergent on

delicate garments.

Wool - Woolmark Apparel Care - Green:

The “Wool” wash cycle is approved by the Woolmark Company for

washing wool garments classied as “hand-washable”, provided that the

wash complies with the instructions appearing on the garment’s label

and with those provided by the manufacturer of this washing machine.

(M )1135

Anti Allergy

Suitable for removing major allergens such as pollen, mites and cat or dog hair.

Anti Stain 40°

The programme is suitable to heavily-soiled garments with resistant

colours. It ensures a washing class that is higher than the standard class (A

class). When running the programme, do not mix garments of dierent

colours. We recommend the use of powder detergent. Pre-treatment with

special additives is recommended if there are obstinate stains.

White

For washing normally to heavily soiled towels, underwear, table and bed

linen, etc in resilient cotton and linen. Only when the temperature is

selected at 90°C the cycle is provided with a prewash phase before main

washing phase. In this case it is recommended to add detergent both, in

the prewash and main wash section.

Steam Refresh

The garments will be damp once the cycle is completed, so we recommend

hanging them to dry (2 kg, roughly 3 items). This programme refreshes

garments by removing bad odours and relaxing the bres. Insert dry items

only (that are not dirty) and select programme “ ”. Garments Steam Refresh

will be a little damp at the end of the cycle and can be worn after a few

minutes. The “Steam Refresh” programme makes ironing easier.

! Do not add softeners or detergents.

! Not recommended for wool or silk garments.

Rapid 30 min

For washing lightly soiled garments quickly. This cycle lasts only 30

minutes, saving time and energy.

Specials

• Bed & Bath

For washing home linen in a single cycle. It optimises the use of fabric

softener and allows for saving time and electricity. We recommend the

use of powder detergent.

• Shirts

Use the special wash cycle to wash shirts in dierent fabrics and

colours to guarantee they receive the best possible care.

• Business

Program for clothes used infrequently or only slightly dirty (do not use

for dry clean garment).

Follow the instructions of the garment’s wash care label.

• Baby

Use the special wash cycle to remove the remove the soiling typically

caused by babies, while removing all traces of detergent from nappies

in order to prevent the delicate skin of babies from suering allergic

reactions. The cycle has been designed to reduce the amount of

bacteria by using a greater quantity of water and optimising the eect

of special disinfecting additives added to the detergent.

• Duvet

Designed for washing eiderdown padded items such as double or

single duvets, cushions and anoraks. It is recommended to load such

padded items in the drum with the edges folded inwards and not to

exceed ¾ of the drum’s volume. For optimal washing, we recommend

using a liquid detergent.

• Silk & Curtains

use special wash cycle to wash all silk garments or curtains. We

recommend the use of special detergent which has been designed to

wash delicate clothes.

For washing curtains, fold and place them in a pillow case or mesh bag.

• Jeans

Turn garments inside-out before washing and use a liquid detergent.

• Rapid 15 min

for washing lightly soiled garments in a short time. Not suitable for

wool, silk and garments to be washed by hand.

• Fitness

Sportswear in knitwear or microbers with a normal degree of dirt and

sweat.

• Cuddly toys

With this program it is possible to remove dust more easily and wash

better cuddle toys.

Spin & Drain

Spins the load then empties the water. For resilient garments. If you

exclude the spin cycle, the machine will drain only

Rinse & Spin

Rinses and then spins. For resilient garments.

DISPLAY

The display is useful when programming the washing machine and

provides plenty of information.

COTTON

--:--

1:40

140040°

By pressing the and buttons, it is possible to select the desired

option and conrm it with the button.

The rst time the machine is switched on, you will be asked to select the

language and the display will automatically display the language selection

menu.

To select the desired language, press the and buttons; to conrm

the selection, press the button.

Area A will display the following: the icon and selected washing programme,

the washing phases and the time remaining to the end of the wash cycle.

Area B will display: the selected options, the energy and water consumption

for the chosen cycle and the button lock symbol.

1. Top

2. Detergent dispenser drawer

3. Control panel

4. Handle

5. Porthole door

6. Drain pump (behind the plinth)

7. Plinth (removable)

8. Adjustable feet (2)

DETERGENT DISPENSER DRAWER

compartment 1: Pre-wash detergent

(powder)

compartment 2: Detergent for the wash cycle

(powder or liquid)

If liquid detergent is used, it is recommended

that the removable plastic partition A (supplied)

be used for proper dosage.

If powder detergent is used, place the partition

into slot B.

compartment 3: Additives (fabric softeners, etc.)

The fabric softener should not overow the grid.

! Use powder detergent for white cotton garments, for pre-washing, and

for washing at temperatures over 60°C.

! Follow the instructions given on the detergent packaging.

PRODUCT DESCRIPTION

C D

Area C will display the default temperature value on the basis of the set

programme; if the programme does not include the setting of the

temperature, the area will display the “ ” symbol.-- °

Area D will display the default spin cycle speed on the basis of the set

programme; if the programme does not include the setting of the spin

cycle, the area will display the “ ” symbol.--

Area E will display the time remaining to the start of the selected

programme if the DELAYED START function was set.

Pressing and holding button for 3 seconds allows for memorising one or F

more preferred wash cycles.

To use the memorised cycles, turn the knob to position .13

Pressing button allows for accessing the menu from which to set G

additional washing options.

Pressing and holding button for 3 seconds allows for accessing the G

settings menu:

- Language: by pressing the and buttons, the user can select the

desired language and conrm it with the button.

- Sound: by pressing the and buttons, the user can activate or

deactivate the sound of the buttons and conrm it with the button.

- Display brightness: by pressing the and buttons, the user can

select the type of display brightness and conrm it with the button.

- Restoring the factory settings: pressing and holding the button for 2

seconds restores the factory settings.

! During a wash cycle if the user does not interact with the display for 5

minutes, the SCREEN SAVER will activate. To return to the previous window,

simply press any button.

Pressing button allows for accessing the menu from which to set the H

washing machine remotely by external device.

Wi Setup (not applicable in Russia)

To enable the appliance to be remotely controlled, you rst have to

complete successfully the connectivity set up process. This process is

necessary to register your appliance and connect to your home network.

The setup procedure has to be carried out only once. You have to carry it

out again only if you change your router setup properties (network name

and password).

Minimum requirements

Smart device: Android with a 1280x720 (or higher) screen or iOS.

See on App store the App compatibility with Android or iOS versions.

Wireless router: 2.4Ghz WiFi b/g/n.

HOW TO SETUP

To use this feature you need to own: a smart phone or a tablet and a

wireless router connected to internet. Please verify with your smart device

that the signal strength of your home wireless network close to the

appliance is good.

1. Download the Hotpoint Home Net app.

The rst step to get your appliance connected is to download the app for

your mobile device. The Hotpoint Home Net app will be your guide and

walk you through all of the steps listed here. You can download the

Hotpoint Home Net app by visiting either iTunes or Google Play and

follow the instructions from app to create an account, connect and

The SAID code is used to sync a smart device with your appliance. MAC

Address is displayed for the Wi-Fi module.

The pairing procedure has to carry out again only if you change your

router set up properties (network name or password or data provider).

DISPLAY INDICATORS

Failure: Call Service

Refer to Troubleshooting section

Failure: Water lter clogged

Water cannot be drained; water lter might be blocked

Failure: No water

No or not sucient inlet water.

In the event of any failure, refer to the “Troubleshooting” section.

Key Lock

To activate the control panel lock, press and hold the button for

roughly 3 seconds. When the display visualises “KEY LOCK”, the control

panel is locked (except for the ON/OFF button ). This will prevent

accidental modications to wash cycles, especially when children are at

home. To deactivate the control panel lock, press and hold the

button for approximately 3 seconds.

Locked door indicator

When lit, the symbol indicates that the door is locked. To prevent any

damage, wait until the symbol turns o before opening the door.

To open the door while a cycle is in progress, press the START/PAUSE

button ; if the symbol is o, the door can be opened.

FIRST-TIME USE

Once the appliance has been installed, and before you use it for the rst

time, run a wash cycle with detergent and no laundry, using the wash

cycle .9 (60°)

DAILY USE

Prepare the laundry by following the suggestions appearing under the

“TIPS AND SUGGESTIONS” section.

- Press the ON/OFF button HOTPOINT” will appear on the display.; “

- Open the door. Load the laundry while making sure not to exceed the

maximum load quantity indicated in the wash cycle table.

- Pull out the detergent dispenser drawer and pour the detergent into the

relevant compartments, as described in the “DETERGENT DISPENSER

DRAWER” section.

- Close the door.

- The machine automatically selects the default temperature and spin

speed set for the selected wash cycle.

- Select the desired wash cycle.

- Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the door will

lock ( symbol on).

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again. To start

the wash cycle from the point at which it was interrupted, press the

START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the symbol turns on to signal that the door cannot

be opened. While a wash cycle is running, the door remains locked. To

open the door while a cycle is under way, for example, to add or remove

garments, press the START/PAUSE button to pause the cycle. If the

symbol is not lit, the door may be opened. Press the START/PAUSE

button again to continue the cycle.

ADDING GARMENTS

An icon on the display will signal when additional garments can be

introduced into the washing machine, without decreasing the washing

performance. To add garments, rst stop the washing machine by pressing

the START/PAUSE button then open the door and insert them.

Press the START/PAUSE button again to restart the wash cycle from

the point at which it was interrupted.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine

using the START/PAUSE button, then select the desired cycle and press

the START/PAUSE button again.

! To cancel a cycle that has already begun, press and hold the ON/OFF

button. The cycle will be stopped and the machine will switch o.

AT THE END OF THE WASH CYCLE

This will be indicated by the word “ ” on the display; when the CYCLE END

symbol switches o, the door may be opened. Open the door, unload the

laundry and switch o the machine. If you do not press ON/OFF button,

the washing machine will switch o automatically after about 15 minutes.

OPTIONS

- If the selected option is incompatible with the set wash cycle or with

another previously selected option, in the menu the name of

incompatible option is represented in grey color and the wording “Not

available” will appear on the display, accompanied by a buzzer, the

option will not be activated.

Steam Hygiene

This option enhances washing performance by generating steam during

the wash cycle to remove any bacteria from the bres, which are treated

at the same time. Place the laundry in the drum, choose a compatible

programme and select option Steam Hygiene.

! The steam generated during the operation of the washing machine may

cause the porthole door to become hazy.

Start Delay

To set a delayed start for the selected cycle, press the corresponding

button repeatedly until the desired delay period is reached. When this

option has been activated, the selected values of delay start will appear

on the display. To remove the delayed start setting, press the button until

“--:--” appears on the display.

Active Care

The detergent, premixed with water, creates an unique emulsion able

to better penetrate the bers of the garments, cleaning stains at even

low temperatures, preserving both colors and fabrics. These results are

obtained also due to the multiple dierent specic movements of the

drum which best take care of the garments.

Final Care

The washing machine will perform gentle tumbling through slow

rotations of the drum. Final Care option starts after the cycle ends for a

maximum duration of 6h and you can interrupt at any time by pressing

any button on control panel or turning the knob.

Specyfikacje produktu

Marka:	Hotpoint
Kategoria:	pralka
Model:	NLLCD 1165 WD ADW UK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Hotpoint NLLCD 1165 WD ADW UK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje pralka Hotpoint

Hotpoint NSWM 963C W UK Instrukcja

14 Października 2024

Hotpoint NBT 1048 WD A IT Instrukcja

9 Października 2024

Hotpoint NBT 108 BLACK IT Instrukcja

9 Października 2024

Hotpoint NG 847 WM A IT Instrukcja

8 Października 2024

Hotpoint NR 748G WS A IT Instrukcja

8 Października 2024

Hotpoint VLXR1020DWO Instrukcja

8 Października 2024

Hotpoint HDA3420ZBB Instrukcja

8 Października 2024

Hotpoint HDA3600NBB Instrukcja

6 Października 2024

Hotpoint NM11 946 BC A UK Instrukcja

6 Października 2024

Hotpoint NM10 944 GS UK Instrukcja

6 Października 2024

Instrukcje pralka

Najnowsze instrukcje dla pralka

Candy CS 15102D3-80 Instrukcja

15 Października 2024

GE GSD3715FAA Instrukcja

15 Października 2024

Siemens iQ700 WI14W540EU Instrukcja

15 Października 2024

LG WTP22BK Instrukcja

15 Października 2024

Freggia WTIE148 Instrukcja

15 Października 2024

Freggia WISE126R Instrukcja

15 Października 2024

Freggia WISE126B Instrukcja

15 Października 2024

Freggia WISE126 Instrukcja

15 Października 2024

Freggia WISA105 Instrukcja

15 Października 2024

Freggia WISA106 Instrukcja

15 Października 2024